Show your slip joint's thread!
-
cool, 8) I've got exactly that model swayback on the way too. though I'm waiting for the USPS man, not the UPS man, ...in Germany.
so it will be a while yet. -
That swayback is
! I was thinking about getting one, but since I got my Texas Jack I don't really....ah, who am I kidding? :) Is that stainless or CV? -
@jerseydevil said:
That swayback is
! I was thinking about getting one, but since I got my Texas Jack I don't really....ah, who am I kidding? :) Is that stainless or CV?CV, i like the nice patina that gets put on CV after some use.
-
That swayback is
! I was thinking about getting one, but since I got my Texas Jack I don't really....ah, who am I kidding? :) Is that stainless or CV?CV, i like the nice patina that gets put on CV after some use.
I know what you mean. I forced a patina on my Sodbuster Jr and large Trapper, but have left my Mini Trapper and Texas Jack alone. The Mini sees a lot of use at work, and is starting to turn nicely. :)
-
-
This was a gift from my wife for fathers day or X-Mas? but its a Case Orange Curly Zebra Wood Trapper, she even got it engraved on the blade, and the bolster, then where she bought it from called and asked her if she wanted them to put it on the holster, they havent done it before, and were going to start doing so, so she said why not,, JR

-
@ Jmora - Damn it, between you and Evan showing those off, how am I supposed to NOT get one? :)
@JR - That is one pretty Trapper! I have one with yellow synthetic handles and CV blades, and I love it. But that one blows mine away!
-
My GEC Lumberjack arrived today!
(More in the Review section
) -
My latest, a Schatt & Morgan cattle knife, courtesy of Ashley.

-
my new GEC #73 linerlock with blue bone arrived today. It will lie perfectly camoflauged in my blue jeans pocket. I'm really happy with it overall, there is only one rather
problem , which you can see in a close up - the blade rides a bit proud. It makes no difference, as it doesn't hurt when you run your finger over it, but still a bit annoying. Also my schrade mini linerlock, I got this a couple of weeks ago, but the grind was all wonky, so yesterday I reprofiled it to 30 degrees, now its a dangerous little bugger.





-
@Jmora said:
the blade rides a bit proud. It makes no difference, as it doesn't hurt when you run your finger over it, but still a bit annoying.That is the problem of buying these knives unseen, over the internet, as I have found out too. Their reputation blinds you.
You could sent it back for a replacement, as the knife point sticks out quite a bit and at some point it* will * catch a thread etc and cause damage. (See BF too for a similar problem)
Or, you could try to file down the Kick of the knife a bit, to lower it.

Or, as someone told me once *"You can always send the knife on to me if that would make things better *
" >:D -
thanks for the advice,
, I'll give it a go, I checked out BF's advice on filing kicks. since I have all the sandpaper and ducttape here that I use for the reprofiling - which is something I'll have to do as well, looks like the blade has a very broad edge.
...I should have known that comment would come back to haunt me. :-X -

:D

-
blade kick is filed, it sits nicely now, hardly took any effort :)
-
Makes you wonder why the GEC workers did not fix it since it was easy to see and easy to fix..
I have a Colt peanut witch need to have its kick filed.
I tried once and gave up after nearly scratching the whole knife.. Maybe i will try again, if it is easy. -
true, it is a pretty obvious QC issue.
I used 600 Grit sandpaper, taped it to the top of a wooden cupboard, I covered the blade and bolsters with ducttape, so there would be no scratches, and then worked very lightly, checking every 10 passes to see what progress I was making. I worked out that if I wanted to sink the blade tip by about 1mm, I would need to take about 0.15 mm off the kick. Obviously I can't measure it exactly, but that just helped me to appreciate how little I should take off, I really didn't want the nightmare situation of doing too much, and having the blade hitting the backspring. I think it took around 100-150 strokes. -
Case Humpback Stockman with red barnboard-jigged bone (Derlin?) handles. Very nice F&F/W&T, courtesy of Ashley.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



