Cheapo Multitools...
-
Here is a set of Sheffields. I think some one gave this set to me some time ago. Note some of the decals have pealed off. I carry them in my travel trailer as you can see there is a tool for every need. ;)

-
I'd not seen the Schrade century before, good to know if I spot it somewhere :D
Nobody ever looks at the reviews I do :ahhh
have a look I think they are in the Swiss subforum 
:D I'm just not on here as often as I used to be - got a lot of catching up to do ;)
I nearly picked up one of those sheffield tools (the one that looks a bit Al-Mar-ish) a few weeks back in a local junk shop. Might have another look at it.
-
Seeing that set brings back memories
... mostly of broken tools and foul language 
-
I'd not seen the Schrade century before, good to know if I spot it somewhere :D
Nobody ever looks at the reviews I do :ahhh
have a look I think they are in the Swiss subforum 
:D I'm just not on here as often as I used to be - got a lot of catching up to do ;)
I nearly picked up one of those sheffield tools (the one that looks a bit Al-Mar-ish) a few weeks back in a local junk shop. Might have another look at it.
I can pick up the larger Al-marish one localy new for £4 if you ever fancy one or this option is cheaper

-
I assume the Sheffield swiss-army type knife above is a copy of a vic or Wenger. Can anyone tell me what model it's copying? I have one of those Sheffield knives, and another no-name knock off that's almost identical, and would like to know what they're copying.
-
The closest model to that Sheffield would be a Huntsman or a Fieldmaster depending on whether you want to fixate on the Phillips or the corkscrew.
Def
-
Excellent. Thank you.
-
To give Sheffield its props, I have a keychain Sheffield similar to the one at the lower left bottom of Longbow's pic. It's been a GREAT tool. It isn't curvy like the one in the pic, but is like a miniature Supertool with scissors. It really impressed a bunch of guys in a Radio Shack when I used it to help a little girl build her science project on the counter! :D
Maybe it doesn't have a pedigree, but I wouldn't trade it for anything.
-
If it works, use it. The name on the side doesn't do anything. :D
Def
-
@THE_LONGBOW said:
Here is a set of Sheffields. I think some one gave this set to me some time ago. Note some of the decals have pealed off. I carry them in my travel trailer as you can see there is a tool for every need. ;)
the one on the outside is like my one but mine is by trail, these must come from the same factory as all these i see look the same, although i have noticed some have a flat head on the saw and some dont, i think also some dont have a file as well, the smaller one in my pic ( by talon) has just a saw so im not sure if there is different versions of this one


-
@Biru said:
To give Sheffield its props, I have a keychain Sheffield similar to the one at the lower left bottom of Longbow's pic. It's been a GREAT tool. It isn't curvy like the one in the pic, but is like a miniature Supertool with scissors.Are you talking about the 12010?
http://sheffieldhardware.com/products/show/12010If you are, I have one as well, and it is AWESOME. I bought mine in a pawn shop for $3, and bought a no-name knock-off of it for a friend recently for $5 new.
-
That looks like it. It's been a real performer.
-
I totally agree. Best $3 I ever spent. :D
I've actually been looking for them elsewhere for sale new, and can't find them anywhere but on the net. New, they're about $7 and up (with shipping more like $14). There's a virtually identical tool available at K-Mart listed on their website as the 'Great Neck 12-in-1 Mini Multi Tool'. I bought a copy of it for a friend for $5. The tool is definitely worth $5 IMO, maybe worth $7... NOT worth $14.
-
Yet another one, sold at tescos uk for £2 with a rather crap torch , MT is actualy good, micra sized but with pliers,


-
I just picked up a Berkley mini fishing tool the other day. What can I say? It was $5, and I was curious.
http://www.walmart.com/ip/Berkley-Mini-Fishing-Tool/16637412Here's a mini review...
Tools and how they functioned:
Ruler: Stamped on outside of frame. English/Metric. Gives about 4 1/5 inches or 12cm measure.
Blade: dull out of package. A little work brought it up to paper-cutting sharpness.
Flathead: drove a heavy screw about 1/2 an inch into pine.
File: fairly aggressive, but doesn't appear to have heat treatment, so I'm guessing not good for metal.
Awl: Punched through a 15oz can with some difficulty, and made great pilot hole in pine for screw.
Phillips head: successfully removed small screws from back of calculator.
Bottle opener: Worked on the first try.
Tiny flathead: Untested, I could probably convert it to fit eyeglass screws with a file in 5 minutes.
Scissors: Not bad. As per my earlier scissors test thread... Failed corrugated cardboard and heavy plastic, barely adequate for khakis and paracord, passed everything else. Score +3
Reference this thread for other scissor results...
/topic/36798Wirecutters: barely...BARELY cut 12-gauge wire. Cut paperclip without a problem.
Pliers: precise tip, able to pick a needle off a countertop. Flexed frighteningly laterally under the strain of trying to bend 12-gauge copper wire into a loop.Saw: hahahaaaa... HOLY CRAP IT WORKED! Notched pine and oak nicely... if a little slowly. It's SO tiny, as to almost be a joke, but it actually works if you've got nothing better to do with your time.
Ergonomics: This thing is a little bundle of dangerous pain. Applying pressure with the pliers hurts. turning screws with the screwdriver hurts. The tool retention is almost non-existent, and all the drivers and awl fold if you sneeze at them.
Flex in the handles becomes pronounced after only a very little use, and I fear it's due to screws pulling through the sheet metal where the plier head connects. There is a review on you-tube which also shows one of the tabs that act as a stop for the plier head popping over the plier stop, and screwing up the handles.
It's unfortunate that this thing has some okay tools, but put together in a terrible frame which screws the whole pile up. If you can get past the not-great pliers and poor tool retention, this thing is better than no tool at all.
Recommendation: For the same money, go get one of the types listed in the previous several posts, such as this one:
http://www.kmart.com/shc/s/p_10151_10104_010W012825630001P?prdNo=1&blockNo=1&blockType=G1
-
Here is the Cheap Chinese tool I own. I post the review here a while ago.
More pics inside this post:/topic/23970It's no Leatherman but I actually like it a lot. It has built-in dual LED flashlight too.
I am keeping this as a backup to my Leatherman Surge.
For $20 bucks, it's a real steal. -
Does anyone know if those KM Crunch knock offs are available somewhere - I'd like to have one to test it?

-
I remember seeing some Crunch copies for sale in a UK site... maybe amazon or something
-
before i trash my old MT (bought from LIDL supermarket for 2.99€ or ~4US$) now --right now after this post!!-- for our/my records and documentation purposes lemme post a few pics of it. if you feel disgusted by such nasty photos or find them repulsive **please **cover your face quickly with your palm thanks

otherwise click to enlarge hehe ;)
the Philips driver was made out of plastic (or different material than the rest), and the bottle opener didnt work a bit, for which i hated this MT, and i am sure that the can opener didnt work either.
the scissors were a joke (and i lost the spring) and the bit driver was crooked at the tip and when i tried to unscrew a screw with one of the bits, the bit lost 2 indentations (Philips bit).

i did some work with the pliers but they got all loose in the joint with much play, and it was too hurtful in the hands to exert pressure on the handles. in the end the pliers were good for nothing. didnt cut wires or anything. the blade was 100% unusable because it didnt lock in neither direction (angle movement maybe 210°, i.e. over the standard snapping/locking 180°!)What i did like about the product:
- the fact that i owned a MT for the sake of owning one (haha. how silly. i know.)
- the nylon pouch, 14grams only, wasnt too shabby. i am gifting it to a friend with a brand-new Ganzo-made MT inside
- it came with a set of bits. i can use the bits with my Spirit Plus, they fit!!
- i am thankful for the introduction to MT's. the purpose of buying this 4$ cheapo years ago was to test MT's and test myself .. if i really need or like or enjoy MT's, and if they make sense in my modest life. above all i did use the pliers often.. all the other tools, as mentioned, didnt do their job. i really need pliers on my tool (for EDC or at home or ..etc..) therefore a standard SAK wouldnt help me much as replacement for a MT. After spending those 4$ and playing with the MT for a long time i've come to the conclusion that i need and want a real MT (medium duty), and no SAK, ..
.. so today i received my brand-new Spirit Plus (with butter blade, bulky brown leather sheath, and the bit kit w/ wrench).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

