My 2nd Sak mod
-
Nicely done. I've been thinking of doing the same thing to my Evo16 for a while now. Did you use a file or a Dremel? How much exactly did you remove from the end?
-
Did you copy the profile from another tool or just 'wing it' ?
-
I use a cheap diamond file from general hardware store. Initially I use the Classic SD as template for my first mod. For the 2nd mod, I took the #0/#1/#2 screw and file the shape accordingly to fit all 3.
-
That's really a great mod that one could get a lot of use from.
Seems like this would be perfect for the Vic cadet as well, but maybe that thinner file would not work quite as well.
-
@demonoflust said:
I use a cheap diamond file from general hardware store. Initially I use the Classic SD as template for my first mod. For the 2nd mod, I took the #0/#1/#2 screw and file the shape accordingly to fit all 3.
Would you be able to trace it on a piece of paper and send me the profile, i'm having trouble finding a 65mm wenger phillips and i need it for a mod
-
very nice, i did the same on a wenger comander, funny thing is ive just this minute dremmeled a larger driver on the cap lifter on a cheap MT i have here :D you cant have enough drivers ;)

-
I use a cheap diamond file from general hardware store. Initially I use the Classic SD as template for my first mod. For the 2nd mod, I took the #0/#1/#2 screw and file the shape accordingly to fit all 3.

Would you be able to trace it on a piece of paper and send me the profile, i'm having trouble finding a 65mm wenger phillips and i need it for a mod
I don't know if I can get the size to scale correctly if I trace and take a picture. I started filing off the tip same width as the classic SD.

Because initially I just want to fit #2 but I think all u need is just to file off the tip about 3mm and file one side of the tip thinner so it can be inserted in the smaller # size.Because I started off using classic sd as guide and resulting in this shape. Take a #2, start filing off a bid of the pointing tip until it seat well in #2, then I am sure it will fit #1 and #0 filing one size of the tip thinner maybe 60 degree. It should fit well.
I will try to mode this with my sportman perhaps.
-
That´s proof little things can be very useful.

-
Very nice indid!

A very simple mod a lot of guys can make, but very useful! A lot of functionality added to such a small tool. Thanks for sharing man!!

-
I have some free time this morning so I though to give my "poor man cybertool" some good polish to match the finish of SAK. I spreaded some autosol on a envelope cover and rub the tip for a few minutes. It's now mirror polish like it was made directly from the SAK factory :)


Sorry for the poor photo taken from my mobile phone.
-
My Combo Screw driver even fix glasses :)

-
I file down the tip of the combo tool of my Compact. It can now fit smaller hex screws and make an excellent letter/carton box opener :-)


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login