Wenger Professionals NOS boxed
-
Nice!! Great Find!! Wenger must have found some because for some reason they have been turning up lately with boxes and all.
I actually like the nylon handled ones, they feel great, really not crazy about the other newer plastic handled ones as user knives though.
I think officially Wenger had these labled as 95mm, I believer there is documentation to that affect.
I believe the big one ColoSwiss showed there is the largest Factory 93/95mm knife at 4 laters, as Vic never did produce a 4 layer Alox model that we know of.
-
Those are very cool .
Jim -
Nice. Wenger should bring those back
-
@ICanFixThat said:
Nice!! Great Find!! Wenger must have found some because for some reason they have been turning up lately with boxes and all.I actually like the nylon handled ones, they feel great, really not crazy about the other newer plastic handled ones as user knives though.
I think officially Wenger had these labled as 95mm, I believer there is documentation to that affect.
I believe the big one ColoSwiss showed there is the largest Factory 93/95mm knife at 4 laters, as Vic never did produce a 4 layer Alox model that we know of.
I think you're right. I have a downloaded page with what appears to be (in small, blurry letters) 9.5 cm.
Karl
-
Nice!! Great Find!! Wenger must have found some because for some reason they have been turning up lately with boxes and all.
I actually like the nylon handled ones, they feel great, really not crazy about the other newer plastic handled ones as user knives though.
I think officially Wenger had these labled as 95mm, I believer there is documentation to that affect.
I believe the big one ColoSwiss showed there is the largest Factory 93/95mm knife at 4 laters, as Vic never did produce a 4 layer Alox model that we know of.
I think you're right. I have a downloaded page with what appears to be (in small, blurry letters) 9.5 cm.
Karl
Ya, checked a few ads and the brochure, most say 9.5 cm (or 9,5 cm for the european folks). Here is a high-res brochure scan.
-
When you check SAKwiki under Wenger Models-Other, the Professionals are listed under 93mm, but there's no link to anything. Could you possibly establish a link to that scanned brochure?
Karl
-
Ya a lot of the Wenger stuff is messed up, and the series. I'm slowing trying to clean it and fix links. The series pages are messed up with last wiki software update and I need to split them up into smaller pages. I've started it behind the scenes, but there never seems to be enough time. Since they are messed up I hate to create a new one just right now for the Professional Series, so there is no link on that page to anywhere.
I'll try to fix something up, since these knives are showing up more.
-
if there is more than two variations it would be worth expanding the wenger section to have 95mm... i understand with the VIP its easier to dump it in the other section
-
@Santos said:
if there is more than two variations it would be worth expanding the wenger section to have 95mm... i understand with the VIP its easier to dump it in the other sectionThe plan would be that from the "Other" page There would be a link to another list, so all the models won't be on the "Other" page, that will just be a landing page that directs you to a page dedicated to 95mm series.
Right now I linked it to the later series brochure as Karl suggested.
-
I've never messed with SAKwiki. Given my usual level of computer "expertise" I'm likely to destroy the entire site.
Karl
-
hi
Nice find!
Here is mine,..
.jpg)
-
Just wow...

-
Want one!

Excellent stuff.... great score :cheers
Coloswiss, if you care to part with that '74 with the bail, I'd be VERY interested :D
(I have some nice Alox hiding out here ;)) -
@nuphoria said:
Coloswiss, if you care to part with that '74 with the bail, I'd be VERY interested :D
(I have some nice Alox hiding out here ;))It's the only one I've see of that model. I think I'll keep it. However if you have some rare alox you want to get rid of I have a couple of beat-up Classics I'll trade. :D
Karl
-
Coloswiss, if you care to part with that '74 with the bail, I'd be VERY interested :D
(I have some nice Alox hiding out here ;))It's the only one I've see of that model. I think I'll keep it. However if you have some rare alox you want to get rid of I have a couple of beat-up Classics I'll trade. :D
Karl
I picked up one of the 4 layer models from 74 recently, had to pay a pretty penny for it. It's scales are a bit rough and only a faint outline of the badge is left. I think the bail was removed as well. Being 4 layers I'd love to find one in better shape.
On my 4 layer one, I seem to remember 1 liner and spacer being nickle-silver and the other liners being aluminium, is your sample like that as well?
I'm convinced their move to plastic scales really doomed this line, as when I hold the old ones and then the new ones, they don't even feel like a Swiss Knife. I think competing with the Alox models from Vic, may have been too hard for them anyway.
-
My 4-blade nylon one doesn't have liners. The spacers appear to be two aluminum and one brass. All of my half-dozen plastic ones do have aluminum liners and brass spacers. I have one of the three-blade Original Swiss Stock Knives with the clip blade which is undated. Mine is fairly rough, but the few I've seen on ebay went for way too much. A few years back I tried to dig up some more of these. The few I found were all in eastern Europe. Apart from language problems I'm always leery of given my credit card info to places in that region.
When I was down at the Wenger store in Boulder recently they said the Standard Issue was going to be discontinued. Apparently some of the equipment is worn out and they don't sell enough of the SIs to justify retooling. If they have some spare parts they may throw some of the Professionals together to clean out the store rooms (maybe that's why we're seeing some showing up now). Otherwise I wouldn't look for these to be reintroduced.
Karl
-
@ColoSwiss said:
My 4-blade nylon one doesn't have liners. The spacers appear to be two aluminum and one brass. All of my half-dozen plastic ones do have aluminum liners and brass spacers. I have one of the three-blade Original Swiss Stock Knives with the clip blade which is undated. Mine is fairly rough, but the few I've seen on ebay went for way too much. A few years back I tried to dig up some more of these. The few I found were all in eastern Europe. Apart from language problems I'm always leery of given my credit card info to places in that region.When I was down at the Wenger store in Boulder recently they said the Standard Issue was going to be discontinued. Apparently some of the equipment is worn out and they don't sell enough of the SIs to justify retooling. If they have some spare parts they may throw some of the Professionals together to clean out the store rooms (maybe that's why we're seeing some showing up now). Otherwise I wouldn't look for these to be reintroduced.
Karl
Make that 4-layer.

-
@ColoSwiss said:
My 4-layer nylon one doesn't have liners. The spacers appear to be two aluminum and one brass. All of my half-dozen plastic ones do have aluminum liners and brass spacers. I have one of the three-blade Original Swiss Stock Knives with the clip blade which is undated. Mine is fairly rough, but the few I've seen on ebay went for way too much. A few years back I tried to dig up some more of these. The few I found were all in eastern Europe. Apart from language problems I'm always leery of given my credit card info to places in that region......
Karl
Thanks; Sorry I was not being precise enough with my language; I call all the spacers on SAKs liners, and don't distinguish the outside ones as liners, as in most cases they serve a different purpose (or multiple purposes), as opposed to liners used in other types of knife construction. I believe Vic calls them all *spacers * and does not distinguish. Although I think on the Gardener their fuctionality could be considered that of a liner if there is a formal definition.
So on my 4-layer one there are no outside spaces, or liners, and the spacer between the blade/reamer layer appears nickle-silver.
I see a few of the newer ones still on ebay this week, so people in Europe might want to grab them. I did not ask if they would ship to the US.
I saw one of those Stock knives on ebay a while back, would love one, it either went for big dollars or I could not bid on it for some other reason. I'd certainly like to add one of those to my collection.
-
@ICanFixThat said:
[quote author=ColoSwiss link=topic=36911.msg593255#msg593255 date=1334527699]
My 4-layerI see a few of the newer ones still on ebay this week, so people in Europe might want to grab them. I did not ask if they would ship to the US.
Which European ebay? I'd like to pick up a few more if possible.
Thanks,
Karl
-
@ColoSwiss said:
Which European ebay? I'd like to pick up a few more if possible.Thanks,
Karl
see PM.
see second PM
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login