'Bare Necessities' SAK mod - modder needed
-
-
-
@Raukodur said:
Hmm, would it be possible to have scissors and the end opening awl in one layer?I was just looking at the 84mm scissors the other day and it was tapered to one side and i'm positive a combotool/nailfile/smallblade/electician blade would fit in the gap. The thing the blade layer spring is 0.3mm narrower than the scissor layer so its not ideal... although i seem to recall reading different years years having different thickness blades. I will know for certain when i eventually pull it apart
Looking at 3 different 91mm Saks across various year models (as indicated back layer tools) i would say NO as there isn't any space. My calipers say scissors are 2.5mm wide, blade 2.4mm. Close enough to guess that on a XAVT where the serrated blade and awl have a hook its a plain old knife spring
-
-
@Raukodur said:
How much space does the end opening awl actually take?Would it be possible to use a slightly wider backspring than the one scissors normally have, and use a washer at either end?
I dont think such a spring exist, if you look at the plier/scissors/saw springs they have a metal end which the brass pin feeds through to keep the spring in place, on the blade/opener springs this is done by the tool itself. Now that i write this you could probably use two of the narrower can/bottler opener springs (1.94mm x 2 = 3.9mm, -2.5mm scissors =1.4mm ) or a saw layer spring (1.85mm) butted up against the scissor spring.
Cant tell you what an alox inline awl measures at but a small blade is 1.5mm and the combotool matches that
-
For a bit more flexibility in spring thickness, you can cut a thin piece of brass the same shape as a backspring (or just a tiny bit smaller, since you want the tool to rest on the spring and not too much on the brass), and it will work as a spacer. I'm doing that with both 0.8mm and 0.4mm brass in my current project; you can see the spacer for the cybertool between the two backsprings in the pics, but I'm working on a thinner one for beside the scissors backspring as well, just waiting on the mailman for some .005" brass for the washers. I'll get some pics of that up once I get all the pieces together.
-
-
So a couple of very kind modders have been in touch with me, however unfortunately due to their location and availability of the cybertool bit driver, the prices I have been so far quoted are way out of my price range (~$180).
Given that I don't mind the tool being on a 91mm frame, I also cannot justify spending so much on what is basically a cybertool 41 with things taken away, and only an end opening awl put on (not that I am belittling the time and effort that goes into any mod to reach the high standard we observe on these forums).
So still hoping and searching...
-
Pm sent!
-
Like this.

Too easy. Now for the scales. He wants black buffalo horn and exposed rivets. I say wonderful. If any of you other modders want a end opening awl and a metal file. Use the mag glass spring with a spacer on each side. Perfect fit.
-
-
-
-
Nothing has showed yet but I talked to him earlier today and he assures me they are coming.
-
-
-
-
-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



