Leatherman WAVE Sheath
-
If you go on Leatherman.com and go to accessories then go to Blast sheaths and you buy the standard leather sheath that is what you are looking for!
-
f you go on Leatherman.com and go to accessories then go to Blast sheaths and you buy the standard leather sheath that is what you are looking for!
Thats what I mean. But how do I know that the Blast sheath will fit my WAVE?
There is a rectangular style sheath for the Charge and Wave, but it's not like the one you are familiar with from your PST. The Charge sheath is heavy leather with elastic sides. I really like it, and it's the same sheath that has come with all of my Charge models... and I have 5 I think... maybe 6...
I have that sheath. That is the one that I dont like. One of those came with my Charge.
-
I just stuck my old Wave into the Blast sheath and it fits. It's a little loose but it works.
Frankly I'm not a big fan of the Kick/Fuse/Blast style sheath- it's bits of leather glued together (I think) and it never seemed all that sturdy to me.
Def
-
I'm sorry, I thought you were talking about a New Wave! Go on ebay and you usually can find the original Wave sheaths. IMO they are some of the best sheaths. I have only seen them in shades of brown...
-
The nicest leather sheath for the wave. On eBay all the time.

The nicest Nylon sheath for the wave. This is the one that came with my original wave. The wave has since been lost and a Benchmade 525 now rides in it. It's a great high quality sheath.

-
I have the leather one Arthur! They make another leather one for the original wave that is even nicer!
-
I my opinion this is the nicest sheath LM ever made. It came with the old Wave.
.jpg)
-
I want to get one of those brown leather ones for my Wave as well. I haven't really had much luck on Ebay though. :( Perhaps I'll look again.
-
I have that brown leather one for my Wave as well- it is indeed a nice sheath, but doesn't have many of the options that the newer ones do, like horizontal carry or extra pockets for bit sets. While I tend to prefer vertical carry (less chance of losing my tool if the top pops open!) and I don't often use the extra pockets, I can certainly see that many do prefer these options.
I am at the point where I like to have the option, even if I don't use it!
Def
-
I don't like leather sheath. All my MTs are with nylon sheaths except the Kick.
-
I dont care to much for the newer sheaths , with the elastic gores . Elastic stretches and perrishes . The original wave sheaths were made by Bianchi and were of superb quality . I have gone over to mag pouches ( eagle or blackhawk ) , Bianchi or Safariland mag pouches would also be very good candidates .
Chris
-
This is what my WAVE sheath looks like:
( sorry for the bad picture I took it in a flash!)

-
Hey all, I don't mean to hijack this thread but had a question and didn't want to start a new thread as I think it applies here.
Anyway, I bought a Charge TTI today (love it) and the nylon sheath that came with it has the two pieces of elastic on the sides of it with "pull type tabs" at the top. Is there a purpose for the gap and tabs between the pieces of elastic, if so what is it for?
Thanks.
-
You can put things in there. The LM bit driver extender, small pens, flashlights. Or any thing else that fits.
-
@prime77 said:
You can put things in there. The LM bit driver extender, small pens, flashlights. Or any thing else that fits.Cool, thanks for the info. I wasn't sure if that was it or if it was just doubled up for strength. I went and looked for and found a maglite solitaire that I had laying around not being used and popped that in there, it fits very well. :) I actually like this sheath a lot, partly for that reason but because you can put the multi-tool in there opened up, can carry it horizontal or vertical, it's small and has the pocket in the back for the bits.
I wish I could have the same sheath with a belt clip instead of the loop, I don't like having to thread things onto my belts. Is there anything out there that is identical to the nylon LM sheath but with a belt clip?
-
The Wave and the Charge sheaths are almost identical. My single AAA flashlight perfectly fits in there. Here are a few pix.




-
Negative, they only come with belt loops! But, I am sure you could make one!
-
You can put things in there. The LM bit driver extender, small pens, flashlights. Or any thing else that fits.
Cool, thanks for the info. I wasn't sure if that was it or if it was just doubled up for strength. I went and looked for and found a maglite solitaire that I had laying around not being used and popped that in there, it fits very well. :) I actually like this sheath a lot, partly for that reason but because you can put the multi-tool in there opened up, can carry it horizontal or vertical, it's small and has the pocket in the back for the bits.
I wish I could have the same sheath with a belt clip instead of the loop, I don't like having to thread things onto my belts. Is there anything out there that is identical to the nylon LM sheath but with a belt clip?
The most common substitute is a cell phone pouch with belt clip.
-
I know that Victorinox makes a sheath for the swisstool spirit that uses a metal belt clip that can rotate to carry either horizontal or vertical. But I don't think it has the extra pouches for carrying stuff.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



