Universal Tool Adapter VS Bit Driver Extender
-
Never had the Universal, but I like the extender because it drives standard bits, the flat Leatherman bits, and it carries nicely in the side of the sheath with my Charge TTi. I've also used the extender without being plugged into a Leatherman tool, can be handy in tighter spaces.
-
I was just thinking about this what is stopping Leatherman or someone else from making a Socket but extension like the one in the picture. With the end flattened so it could fit in just like the driver bit extender?
http://www.freeinfostuff.com/TorqueExtension/TorqueExtension.htm
-
I am not sure if you express yourself correctly:
You get three tools:
The Universal Tool Adapter:
http://www.multitool.org/Leatherman-Tool-Group/Accessories/2007/03/12/universal-tool-adapter.html
This tool will work with any medium or large Leatherman multitool, being clasped by the handle/and
Removable Bit driver:
http://www.multitool.org/Leatherman-Tool-Group/Accessories/2006/10/22/removable-bit-driver.html
This tool will only work with the wave1/supertool/Blast/Fuse/Kick type of long phillips driver. It slides over this driver with the square side.and
Bit Driver extender:
http://www.leatherman.com/accessories/product/Bit_Driver_Extender
This tool can only be used by the above mentioned two (you have to have one of them), or with the bit driver of the Wave / Surge / MUT / skeletool / Charge, or in an existing 1/4" driver tool.To answer your question: The Universal Tool Adapter is the strongest. You can use so much torque when properly clasped in a multitool that you can strip the bit driver's tip without breaking this tool or the multitool or even strip the screwe head being turned. The removable driver may break the Phillips driver of the multitool or the pivot of the tool. The Bit driver extender may break the bit driver or even the pivot or the flat part of the extender may break off. The Universal Tool Adapter may also be used with drivers without a multitool, but then you will have less torque. Unfortunately it is bigger and take up more space.
-
anything we can use sockets with ?
-
From Leatherman, not directly. It is fairly easy and inexpensive to source these adapters that will allow a 3/8" hex (like theose LM adapters) to drive a 1/4" socket:
http://www.amazon.com/DEWALT-DW2542-4-Inch-8-Inch-Adapter/dp/B0000225P5/ref=sr_1_1?ie=UTF8&qid=1335102200&sr=8-1If you want to venture outside Leatherman, several SOG multis have a 1/4" socket driver.
-
Thanks Jors!!
I think Bit Driver extender is enough for me~ :)
@Jors said:
I am not sure if you express yourself correctly:You get three tools:
The Universal Tool Adapter:
http://www.multitool.org/Leatherman-Tool-Group/Accessories/2007/03/12/universal-tool-adapter.html
This tool will work with any medium or large Leatherman multitool, being clasped by the handle/and
Removable Bit driver:
http://www.multitool.org/Leatherman-Tool-Group/Accessories/2006/10/22/removable-bit-driver.html
This tool will only work with the wave1/supertool/Blast/Fuse/Kick type of long phillips driver. It slides over this driver with the square side.and
Bit Driver extender:
http://www.leatherman.com/accessories/product/Bit_Driver_Extender
This tool can only be used by the above mentioned two (you have to have one of them), or with the bit driver of the Wave / Surge / MUT / skeletool / Charge, or in an existing 1/4" driver tool.To answer your question: The Universal Tool Adapter is the strongest. You can use so much torque when properly clasped in a multitool that you can strip the bit driver's tip without breaking this tool or the multitool or even strip the screwe head being turned. The removable driver may break the Phillips driver of the multitool or the pivot of the tool. The Bit driver extender may break the bit driver or even the pivot or the flat part of the extender may break off. The Universal Tool Adapter may also be used with drivers without a multitool, but then you will have less torque. Unfortunately it is bigger and take up more space.
-
Keep in mind if you want to use sockets, the bit holder on tool itself isn't designed to take high torque. I've heard one crack into pieces because the guy was torquing a screw hard with handle at 90°.
-
The UTA is very strong , probably stronger than the Leatherman tool itself . It will do 90 , 45 and straight . It will work on tool , or off tool as a palm/stubby driver . It will also work with a variety of non leatherman multi's .
Chris
-
ok so which one do i need to use sockets please
-
@Ice Cold said:
ok so which one do i need to use sockets pleaseIf you're going to use sockets with your Charge using something like the hex adapter I linked above, and you're going to use of the of the adapters listed above, your best bet is the UTA. You will need to hunt for one, as they are long discontinued. Also, make sure it is the Universal Tool Adapter. Leatheman also produced a Standard Tool Adapter for use with the PST, PSTII, Super Tool, Pulse, ST200, etc that would not be compatible with the Charge. I would not recommend the bit driver extender for this application as the torque needed might be too much for the bit driver on the Charge.
All this taken into account, are you really going to save that much space by using all these parts to drive sockets with a Leatherman that doesn't ratchet vs. using a small ratchet that will mate right up to your 1/4" sockets? Especially if you need to carry more than one or two sockets to get the job done.
-
The standard tool adapter can be adapted to any leatherman if you dremel off the little spur , If I owned both I would post a pic for you .
Chris
-
Nah decided to get a Socket set from Amazon cheaper and more options. Just ordered my newest Multitool at the same time. a Gerber Dime in Black really wanted something Keychain EDC carry.
Looked at the Leatherman Squirt but it was $10 more
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login