Oh, so shiny and sharp!
-
Hi Beth and welcome to
Where to start?
What are your interests and needs in a MT? A Leatherman Micra might be a good tool to start with. :) -
Hi Beth. Probably I would start with a tool from each main camp. A pliers based model and also a sak. I would get ones with as many features as possible to start with. That way you can decide what you actually use and don't. Then further purchases can be made based on this information, making your choice lighter and slimmer/ more compact. Sounds easy, however most of us will agree we are still searching for our own perfect multi.
-
@b.macavoy said:
but I can't wait to start learning.
Where should I start?Welcome Beth.
For reading, I suggest these links: (also on the top right of your screen)
-
Hi, Beth! I was just like you- knowing very little about those things, but still hopelessly in love with them! :D I came here because I was interested in the LM Micra, so there's where I started - reading the threads devoted to it. Then, I also like flashlights, so I read some threads about Fenix.... and eventually I got interested in browsing people's EDC pictures.... so here I am with over a hundred posts in no time :D :D
-
Welcome beth, Hmm where to start
well you could go SAK but there are so many and it might take you a while to find the model you like, the explorer is a good start or a tinker if you want smaller, MT wise a leatherman wave is a good start for a full size model, but there are so many too choose from, what are your daily needs 
-
Translation of some of the Alphabet Soup being thrown at you...
MT = Multitool
LM = LeathermanWhile plier-based multitools are sometimes generically referred to as 'Leatherman', on this site when someone says Leatherman, they actually mean a tool made by the Leatherman company, as opposed to SOG, Gerber, Victorinox, etc.
EDC = 'Every Day Carry': the stuff most people have on them every day, usually in their pockets.
SAK = Swiss Army Knife
Hope this helps translate some of the lingo in the previous posts.

-
Welcome Beth, you'll love it here.
@Lynn LeFey said:
Translation of some of the Alphabet Soup being thrown at you...MT = Multitool
LM = LeathermanWhile plier-based multitools are sometimes generically referred to as 'Leatherman', on this site when someone says Leatherman, they actually mean a tool made by the Leatherman company, as opposed to SOG, Gerber, Victorinox, etc.
EDC = 'Every Day Carry': the stuff most people have on them every day, usually in their pockets.
SAK = Swiss Army Knife
Hope this helps translate some of the lingo in the previous posts.

Great effort Lynn,
also look at this thread for other popular acronyms.
/post/27186 -
Hi Beth, just hang out here for a while and I'm sure you'll absorb all you ever wanted to know about tools. We aim for a good community first and foremost so just relax and enjoy yourself here. When you have questions, someone will be happy to answer.
Welcome to the forum.
Def
Sent from my MB860 using Tapatalk 2
-
Good to have you with us :D
Just let us know what your needs are in a tool and we'll bombard you with lots of reasons to spend your money

-
Thank you so much for the warm welcome. I can see I will be comfortable here.
The link to the acronyms is so helpful.
Now, I am off to learn about tools! Multitools!
:)Beth
-
Good to have you here Beth..

-
Welcome! Good to have you here!
-
Hey, Beth,
I posted this story here over a year ago. Just for your benefit I am reposting it.
I got a used LM Surge at a VERY good price on ebay, Since I knew it was coming I purchased a belt clip from the LM web site and had it ready to install. I had been fondling my new toy for about a half hour when I remembered I was supposed to meet friends for dinner. I couldn't bear to leave my new toy at home, so I clipped it to my belt and headed out to the restaurant My three friends were waiting for me. As I slipped into the booth I noticed a long thread hanging from my shirt cuff. I scrounged in my pocket, produced my LM Micra and snipped off the thread. One of my friends on the other side of the booth pulled out his LM Wave, flicked open the pointy blade, which I considered inappropriate in a family restaurant, and chided me: “You should get one of there!” I dug in my pocket and produced my LM Wave, and laid it in the table by my Micra. I did not open the blade. I said: “I've got one of those.” Unable to resist, I said: “I've also got one of these.” I pulled my new(used) LM Surge from my belt, popped open the big pointy blade(I know, wrong place), and laid it along side my Micra and Wave. The Surge was still quite new at the time and none of the other guys had yet seen one. A gray haired lady sitting at a table across the aisle from our booth looked across and saw my display of hardware. I was quite surprised when she gave me a big approving smile, as if I had laid out my grandmother's best silver. Then a waitress came down the aisle She was working the other side of the restaurant but had to pass our booth to get to the kitchen. She saw my hardware laid out on the table and stopped to look. She picked up the Surge and hefted it in the palm of her hand. She said: “I like big tools!” The booths in front and back of us, and two tables across the aisle all burst out in laughter at her double entendre. Then she closed the blade one-handed(press the liner lock with the thumb and rotate the blade with the forefinger). I ALWAYS do it granny style(depress the liner lock with the right thumb, and close the blade with the palm of the left hand..) I was impressed! That blade was stiff, still is! She laid the Surge back in place on the table and continued toward the kitchen. The manager had heard the outburst of laughter. He left his post at the register and wandered down our aisle to see what was going on. We all closed and pocketed our various pieces of hardware, and by the time the manager arrived in our area everyone was busy cutting meat and stabbing veggies with restaurant supplied utensils. After the manager had passed, the gray haired lady across the aisle gave me a big wink, and her husband smiled. When we were ready to leave my friends took the aisle straight to the front of the restaurant I detoured over to the other side where the waitress who had caused so much amusement at our booth had been serving a family of seven. The cheap smurf had left a three dollar tip. I dropped another five dollars on the table and headed for my friends at the check out. My mother worked as a waitress most of her life. -
Hiya Beth,nice to have another lady amongst us.
Where to start?
1 Vic Super Tinker
2 LM MIcra
3 SOG Pocket Power plier Delux S45think that covers it
Welcome to the mad house
-
That is a great story!
"I like big tools.!"
Now, I will just be waiting for an opportunity to use that line myself!
lol
Thanks for that big tip too, I tried to waitress, being in the Army was easier.

Beth
-
The mad house sounds like fun.
Your avatar is cute, but a little confusing to me.
What are the cards?

Beth
-
Welcome aboard Beth.
-
Welcome Beth
I'm new here to but I've been a long time lurker here.
Micra or super tinker are great places to start
If you want a multitool the leatherman Wave is a excellent tool you may like and is definitely worth trying. It has all the basics in a affordable package.
There are so many good tool's I say enjoy trying as many as you can the perfect tool will find you

-
Thank you Craig.
Very friendly forum here.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



