What Did You Use Your Multitool For Today?
-
Used to jeweler flathead on my Leatherman Wave to disassemble the scissors on an old SAK Explorer, then used the diamond file to sharpen the scissors, and reassembled. I'm liking the Wave more every time I pick it up.
-
I used the blade on my Charge Tti to open the package that my new SAK SwissTool Spirit Plus w/Ratchet came in.
-
Used my PS4 to open up a parcel containing another PS4.
-
I used a Leatherman Wave to open a #10 can of beans.
I used a Sheffield 1200E to open a #10 can of beans.
I used a Victorinox Tinker to open a #10 can of beans.I have a lot of beans in my freezer now. :D
-
Used the Super Tool 300 for some yard work.
-
-
Today my Spirit X arrived, courtesy of Captain Spaulding. About an hour later, I used the pliers, pry bar/chisel, and file to replace pins in the floor scarifying machine we rent out at work. Those cotter pins were a pain!

Just to show why we had to replace the pins, the new pin is on the left, a used one on the right:

The old ones had been worn smooth and ground down by the spinning of the grinding wheels! The wheels wouldn't contact the cement being worked on, they kept flopping away. Sucker works great now.
Also used the tweezers on my Evo 16 to remove a couple of metal splinters...... ::) -
Used a SAK Tinker to remove the scales of an SAK Explorer for cleaning. Used a Leatherman Wave's scissors to cut some suede leather. It works on leather, man. Get it? 'leather, man'?

-
::) -
Jerseydevil, that sure is a lot of wear! Nice job spotting that.
-
Used the serrated blade on a Wave to cut apart an old plastic trash can that had splits in it. Now it should fit in the recycling bin.
-
The tiny Micra will manage to unscrew & screw about 20 of those big guys today... already managed 1/3 without a problem!


I love that tiny mighty thing more and more :D
-
We had a door we needed to lock at work, but it hasn't been locked in so long that no one knew where the key was. I took the cylinder out with my Blast, and found one that matched it, but while swapping the levers out, the actual cylinder slid out of it's sleeve and all the tumblers fell out. I managed to get them back in, but it was impossible to slide the cylinder back in and not lose any so I decided to just key it with 2 tumblers, as we are going to replace it tomorrow anyway.
Problem was, the lever that I needed to put on the new cylinder was not cut for it, so I had to use the file on my blast to remove quite a bit of metal from it to make it fit. I got it down to the right size and slapped that bad boy back together and we were rocking!
The little screws that hold the lever on the back of the cylinder are a bit small for my Blast's phillips, so my Explorer came in to save the day there. The Explorer phillips is a dream on smaller screws, I even stripped one very badly(my fault, not the SAK's), and the explorer shows no signs of wear.
My boss always teases me for carrying my tools and for being a member of forums just for tools. I showed him what they are all about tonight!
-
I ran a new electrical line and installed an outdoor outlet with my Powerlock.

-
I didn't have a spoon, and ended up using the serrated blade on my charge TTI as an eating utensil. After carefully eating dinner without cutting myself, I realized that things would've be a lot easier with the large flat head screwdriver.

-
That's a brave use of a serrated blade for sure. I've used a knife before to eat pineapple. I got a lot of strange looks as I stabbed the pineapple and ate it, but it worked.
-
I was working in my care home today doing some handyman work, i used the PT lots for tightening screws and using the pliers to untighten broken bolts on a hospital bed i had to dismantal and re-build in another room, i also used the blade on my tinker to open a few large boxes si a very Multi day :D

-
@Zed said:
I was working in my care home today doing some handyman work, i used the PT lots for tightening screws and using the pliers to untighten broken bolts on a hospital bed i had to dismantal and re-build in another room, i also used the blade on my tinker to open a few large boxes si a very Multi day :D
Cool :D Even the most boring job becomes pleasure when you use your multi :D I also had a multi-day, although it was only lots of... postage box cutting & shapping & wrapping & unwrapping... lol
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
