Lanyard ring.
-
Never use it. I find it gets in the way.
I work in an office environment, where I am unlikely to lose a tool by dropping it.
-
Only on the smaller ones for attaching a P-7 type clip so it can hang inside my pocket. KF4 being "smaller" :)
-
Yes I used them always as thats how I pocket carry MTs. That keeps them vertical in pocket when lanyard tied to my belt. I had to mod my spirit by drilling through the pivot to be able to carry it the way I like. Im not a sheath guy though so if people like sheaths then I understand why you wouldnt need a lanyard.
-
Ironically, I do not use the lanyard ring, but do put a piece of paracord on the belt clip for my Leatherman Wave so that it is easier to grab out of my pocket and so the clip does not ride too low and get stuck on my pants.

-
Ive always found they get in the way on most MT's but like having a paracord on my PT as with my finger through it its like having spring loaded pliers

-
I'm not fond of lanyard rings but I do use the detachable ring and an extendible keychain on my Wave.
-
On knives that I carry in my pocket, line my Farmers and Cadets, not only do I not use the keyring, I also grind off the nub to make it more smooth.
I do the same on my Recruit used for whittling.
On my OHT which I have in sheaths and belt carry when woods-bumming, I have a lanyard and fire-steel on their keyrings.
-
Much like Nuphoria, I use the lanyard ring on my Juice to attach a P-7 clip. If the MT has a pocket clip, then I have no need for the lanyard ring.
-
Heres a pic of how I carry mine

-
cheers Dunc. Yours was one of the few examples I could think of where someone actually attached the tool to their person in some way. :)
-
Cheers Gareth
and the good thing is you can take it out of the sheath and use it with the lanyard still attached , it runs through the hole in the bottom and of course its easy to detach if need be. -
Never have used it while carrying a sheathed MT, but I have used the keyring on my 111mm vic with a paracord lanyard attached to a belt loop, while carrying it in my pocket.
-
THe only full size Multis I use a lanyard ring on are my Juices(S2 and KF4)The KF4 gets a full length paracord lanyard too,as it disapears into my Skinth,and I cant get my fingers to it ;)
-
I'm a recent convert to lanyards on SAKs. Now that I've tried it I've found it indispensable. All of my SAKs have a lanyard attached. Getting it out of the pocket is so much easier with them.
-
-
One thing my backpacking SwissChamp doesn't have is a light. But it does - an LED on the lanyard ring.

-
Oddly I'm fine with having a 'fob' type thing on SAKs or tiny MT's such as the Squirt, but I've never once felt the need for either a fob or a lanyard on a full sized MT.

-
@Gareth said:
Oddly I'm fine with having a 'fob' type thing on SAKs or tiny MT's such as the Squirt, but I've never once felt the need for either a fob or a lanyard on a full sized MT.
OK, I now need to eat humble pie. :-[ I was working to sort out a window that a guest had reported that she couldn't get to close. Normally this is a easy fix, but this time I found myself having to work on the window, while it was open, four stories up, over a moderately busy street. So to give myself a little peace of mind I quickly knocked up a wrist lanyard to hold my MP600 while I was working. I will say that I cut it off just as soon as I was done, but I was grateful it was there at the time.
-
Yes and no
Sent from Ash forum mobile
-
Here comes a really vague answer: Depends. :)
I don't keep a lanyard on any of my MTs full-time, but I will use one if I need to work high above the ground, or over water, or anywhere else where dropping the tool would make me seriously unhappy. So I make sure whatever multi from my rotation I'm carrying has accommodation for a lanyard.
My EDC rotation is pretty small these days: I always have the Charge Ti in my Suburban Assault Bag, and sometimes carry either a PST-II or SwissTool Spirit on my belt. There's also always a decent clip-on lanyard in the bag, too.
The Spirit doesn't have a lanyard loop, but I can clip to the corkscrew slot in the frame.
The PST-II has that tiny loop at the pivot; I added a 4mm split ring there for cliping the lanyard.
On the Charge, I do NOT trust the lanyard ring that fits into the clip slot; it's waaaaay too easy to put a little pressure on the lock bar and WHOOPS there goes the lanyard loop. Instead, I use the Super Secret Hidden Lanyard Loop built into the handle, and like the PST-II, put a split ring through it so it doesn't slip back into it's slot on me.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login