The SAK Whittling Club
-
I've worked at Scout Camps for 9 summers in total, and at camp I would always be whittling something. Always with a SAK.
I've done balls and chains, balls in cages, lots of spoons, forks, sporks and foons, I did a different decorative walking stick/staff every year, one with a ball in a cage on top of the staff.
Good times, sadly I never do any whittling here in the real world.
-
@Sags said:
I've worked at Scout Camps for 9 summers in total, and at camp I would always be whittling something. Always with a SAK.I've done balls and chains, balls in cages, lots of spoons, forks, sporks and foons, I did a different decorative walking stick/staff every year, one with a ball in a cage on top of the staff.
Good times, sadly I never do any whittling here in the real world.
It sounds like you've done enough at scout camps to make up for it. Chains and balls in cages seem like a ton of work.
Maybe I can talk you into easing back into it here with a simple project. Just start something. :)
-
@gcconspiracy said:
Awesome thread! I have been whittling with a modified Tinker for the past few months, and have had a blast! Here's a picture of a couple projects done 100% with the Tinker (the owl was done this afternoon after seeing the pattern on this thread!), along with a picture of the modified small blade on my tinker.Lookin' good, gcconspiracy! What's the wood? It looks like Douglas Fir to me. A good choice. Straighter and less knotty and sappy than pine, but still soft enough to not be frustrating.
-
@Smaug said:
Lookin' good, gcconspiracy! What's the wood? It looks like Douglas Fir to me. A good choice. Straighter and less knotty and sappy than pine, but still soft enough to not be frustrating.Not sure what the wood is... I just pick up scraps from the "free" pile at the local lumber yard! These two pieces came from an old 2x2. For all I know it could be Doug fir!
-
So did I do this right?

-
Looks right to me.
-
Finished the fork the other day. Looks tiny, but works well. I think I'll do a spoon next.

-
I have been really wanting to try my hand at whittling, but have been busy lately and it just slipped my mind. I think I might make a wood run tomorrow.
-
I made a wood run yesterday, during a walk through the forest preserve with my mom and baby. They have cleared the saplings at the edge of the trail, so there's some nice, relatively green wood just ripe for the taking. (green wood whittles better. Dried sugar maple or birch, for instance, are murder to whittle. But green is actually really nice!)
I've got a wide enough piece to make the spoon now.
-
My problem is I am not very experienced when it comes to identifying trees which would be good wood for whittling.

-
@captain spaulding said:
My problem is I am not very experienced when it comes to identifying trees which would be good wood for whittling.
You just need the right tutorial:
Monty Python The Larch sketch:D
-
Now i'm ready. lol
-
@captain spaulding said:
My problem is I am not very experienced when it comes to identifying trees which would be good wood for whittling.Avoid pine and oak. Just about anything else is good. Green is easier. If there aren't recently-cut branches on the ground for you to just pick up somewhere, trim one off that is in the way anyhow and use that. (like reaching toward your house, or overhanging a sidewalk too low, etc.)
I got my latest batch of branches in the forest preserve yesterday; they had cut all the saplings back from the pea gravel trail, and just threw them into the woods. So off I went with my Hiker, saw deployed and ready for action.
Consider buying the book I recommended on Page 1: "The Little Book of Whittling." It is well worth the $10, and the author dedicates a few pages to species and where to find the wood. He also gives step-by-step instructions on how to whittle each of the projects I've done so far. (spreader, fork, poker) Check out the free preview on Amazon, and you'll get a good taste of it.
-
Thank you for the great info Smaug. I definitely need to get my head in some books and do some studying. I actually wen't to a craft store today and picked up some wood specifically for whittling. I am in the process of my first real whittling project and am loving it so far. I am using a VIC Spartan for the first go as it had a large blade and small blade which turns out is working well. I will keep everyone updated.

-
@captain spaulding said:
My problem is I am not very experienced when it comes to identifying trees which would be good wood for whittling.
(http://forestry.about.com/od/treeidentification/tp/tree_key_id_start.htm) I like maple, green is soft and it gets very hard and strong as it dries.
It's a shame you guys don't live close, I am constantly burning maple saplings and small branches just to get rid of them. They grow like weeds here. Then again, if you lived near me (Maine) you wouldn't need mine :-\
For those who don't have a ready supply of local wood: if you search Amazon for basswood, there's a lot of selections.
-
Ok, Im off work sick today, so maybe I can give whittling a shot. I found a chunk of basswood I had saved. Im going to try doing that chain one, not practical for anything, but it looks neat to say you make a chain from a single piece of wood I think.
-
I whittled this eagle's head last night with my Tinker. It is out of some sort of bark I found on the beach, and I really did very little to it, mostly just worked with the natural shape of the piece.

-
Very nice work, gcconspiracy. That makes me think of what Michaelangelo said about seeing shapes in the marble, just wanting to be released.
-
Well I have been doing a bit of whittling over the last few days. I was going to do the egg shape to hone my whittling skills, but half way through I decided (more or less) that a wooden ball would work out as well. I am just about done, it just needs some fine tuning and its done. I have pictures of the progress and will post it here when I finish it.

-
@gcconspiracy said:
I whittled this eagle's head last night with my Tinker. It is out of some sort of bark I found on the beach, and I really did very little to it, mostly just worked with the natural shape of the piece.Nice work!!
Sent from my MB860 using Tapatalk 2
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login