Leatherman REBAR Multi-Tool
-
Great. There is an Academy Sports that just opened a month or two ago not too far from where I live. I might just have to plan a field trip to check it out.
-
I called the Academy Sports a few minutes ago and they have several rebars in stock and they are only 39.99. JOY O JOY roadtrip. The store is not to terribly far and it is open til 10 PM.
-
Cool. They are $49.99 here.

-
-
Made it to Academy Sports and they had the Rebar. They had mislabeled it for 39.99 it was supposed to be 49.99 but they let me have for the cheaper price because that was what it was labeled on the shelf. They had several newer tools that i have been waiting to see as well.
-
Nice one! What do you think of the Rebar?
-
Come on folks, we need your pics and thoughts ASAP. :)
-
Ok, I've had a minute to play with my Rebar.
I have to say, the thickness of the blades bothers me, they are a tad thinner than a 91mm SAK blade to be honest. I can see why, there is not anymore room to fit a thicker blade.
The obvious concern there would be how prone a thin blade can be to breakage and only time can tell that. But I have put some serious vertical pressure on both the PE and Serrated blades cutting small diameter wood dowels and zip ties and felt no issues, and the blades tore right through all of it. Will they break easily, I don't know yet but I'm sure I'll find out if they will, but until then I will use the heck out of them.
The pliers have got to be the coolest, most rugged bad ass pliers I've ever seen on a 4 inch tool. The fine tooth section is a bit coarser than the Blast's pliers, and that bothered me a bit but my goodness it grips. Complaint dissolved, those things grip!!! I was just trying the other day to grip a stripped screw with the fine section of my Blast's pliers and it kept slipping. Same screw with the Rebar today, and it yanked it right out! I wish the regular plier section was bigger but it really doesn't affect use as far as I can tell.
The cutters. Wow, replaceable cutters on a 4 inch tool. Not only are they replaceable, I just cut a key in half with them and left not a scratch or dent! And the rolled handles make any plier/cutter action very comfy.
The tools are pretty much scaled down ST300 tools. The phillips is exactly the same as the Blast, and yes the bit adapter fits perfectly, I already tried it. The large flathead is the same too, and works as expected: awesome. They also brought along the same can opener, which I've always liked as much as one can like a can opener. The file is sweet, they really put a good cut on them, nicer than my Blast. I just don't dig the shape, I like a straight file as the curvature makes you think you are slipping off whatever you are filing. The saw cuts like any other LM saw, it's just a bit shorter than the blast's saw.
The awl. I missed having an awl! This one looks to be as robust as any they have made, it's thick and stout.
I wish they hadn't put the lanyard ring in, it's easily 4 times thicker than the Blast's lanyard ring and I never, ever used that. They might have been able to fit scissors if it weren't for that thing.
All in all, an awesome tool. It's slimmer than it looks, in fact it very much reminds me of how a Crunch feels in hand. The pliers have a spring similar to Swisstool's, and it feels nice having them snap into place.
-
Nice review! You might want to put that blade through a few more tests and try to get it to break. It sounds like it should be no trouble at all

-
I think I am going to test this tool pretty hard, or at least as hard as I can. I am carrying a backup along with it just in case because I intend to put it through it's paces. Not negligence, but good solid use. Be patient though because most of my jobs are light to medium duty; I'm not a tradesman or anything. I have a few home repair jobs coming up because I am moving and have to prepare my house for my renter. Maybe that'll do it!
-
@Gareth said:
Come on folks, we need your pics and thoughts ASAP. :)Sneaky peak: /topic/37219
-
Got mine Monday (4/30) as well...


-
Hurrah!
I'm pretty much planning on whipping the blades out and getting some scissors in there, so I can't wait to get my hands on the poor thing >:D
-
I'm now waiting to have a look at Chrissy's at the next meet-up. ;)
-
Ok,
This is my only question about the Rebar. Anyone sized it up with the Wave/Charge to see if the pivots line up? I want to swap out the awesome plier head to the Wave/Charge and be the ultimate MT nerd.
-
The force is strong with this one.
I bet somebody will give you an answer soon enough.
-
Yup, waiting to see if the parts can be retrofitted to a more ultimate Charge TTi; pliers & awl.
Not sure I have the nerve to dismantle another tool just to get an awl. Done mangled one washer between the area where the flathead was and the small bit driver. I so need a jig for this. -
@Metropolicity said:
Ok,This is my only question about the Rebar. Anyone sized it up with the Wave/Charge to see if the pivots line up? I want to swap out the awesome plier head to the Wave/Charge and be the ultimate MT nerd.
Wow I think I may have to look into that.
-
@Metropolicity said:
Ok,This is my only question about the Rebar. Anyone sized it up with the Wave/Charge to see if the pivots line up? I want to swap out the awesome plier head to the Wave/Charge and be the ultimate MT nerd.
The bottom of the pliers on my charge have a raise portion of metal which is used for engaging the locking pins for the blades when the pliers are open. If the rebar pliers "snap" into place, that means the outer section of the pivot point has a detent somewhere and not completely circular. Also, the geometry of the plier head on the rebar must be smaller or exactly the same size or else the wave/charge won't close completely. This is what you might deal with after you figure out how to take out those proprietary fasteners the rebar.
I want to have replaceable wire cutters on my Charge as well, but these are some of the design differences that I've thought about that will make it not an easy task.
-
Ok,
This is my only question about the Rebar. Anyone sized it up with the Wave/Charge to see if the pivots line up? I want to swap out the awesome plier head to the Wave/Charge and be the ultimate MT nerd.
The bottom of the pliers on my charge have a raise portion of metal which is used for engaging the locking pins for the blades when the pliers are open. If the rebar pliers "snap" into place, that means the outer section of the pivot point has a detent somewhere and not completely circular. Also, the geometry of the plier head on the rebar must be smaller or exactly the same size or else the wave/charge won't close completely. This is what you might deal with after you figure out how to take out those proprietary fasteners the rebar.
I want to have replaceable wire cutters on my Charge as well, but these are some of the design differences that I've thought about that will make it not an easy task.
Never stopped me before :)
Just gotta find the time now...and a rebar.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login