Cleaning an old vic?
-
What I use is dawn dish soap. Soak in it over night. Then I take wd-40 and spray it down and let soak another night. After that the old toothbrush comes out (and yes even it's been modded to clean SAKs ). However, if theres dirt under the scales, there's a little trick I use to get that out without removing them. If you get a set of feeler gages, and slightly pry up the scale, you can clean under it without having to remove them.
-
Well, this is a Wenger Esquire nail file and I wanted to show the before and after on it. Before photos show the general crud you find stuck onto a nail file of this sort(etched or sandblasted type). I used a small steel wire bristle brush and brushed it lengthwise for 5-10 seconds until the stuff came off. After photos are self explanatory.
Before with flash on-
Before with no Flash-After with no flash-
After with flash on-The flash can make a real difference in seeing the close up details so I included both.
-
Nice restore stressmaster! Got any tips to rejuvenate seized up scissors (modern riveted style)? I've soaked and scrubbed with everything in my bag of tricks, and I've tried to floss out any debris, but they still wont spring open nicely. The older style scissors are a piece of cake to restore, I take them apart and clean/buff and reassemble.
-
@stressmaster5000 said:
Well, this is a Wenger Esquire nail file and I wanted to show the before and after on it. Before photos show the general crud you find stuck onto a nail file of this sort(etched or sandblasted type). I used a small steel wire bristle brush and brushed it lengthwise for 5-10 seconds until the stuff came off. After photos are self explanatory.Before with flash on-
Before with no Flash-After with no flash-
After with flash on-The flash can make a real difference in seeing the close up details so I included both.
Nice job. This and he also makes 50 year old scales look brand new.
-
@Syph007 said:
Nice restore stressmaster! Got any tips to rejuvenate seized up scissors (modern riveted style)? I've soaked and scrubbed with everything in my bag of tricks, and I've tried to floss out any debris, but they still wont spring open nicely. The older style scissors are a piece of cake to restore, I take them apart and clean/buff and reassemble.Well, what I do is use a razor blade first and scrape all the gunk from around the pivot area you can reach, then just flush with water or oil and work it until it frees up. I have had some that just won't get any better.
BTW - Here is the link to my photo album for those photos. I posted smaller size, and some may want a better look at them.
https://picasaweb.google.com/113972130751178685410/SAKKnifeCleaningAndTools?authuser=0&feat=directlink -
@Syph007 said:
Nice restore stressmaster! Got any tips to rejuvenate seized up scissors (modern riveted style)? I've soaked and scrubbed with everything in my bag of tricks, and I've tried to floss out any debris, but they still wont spring open nicely. The older style scissors are a piece of cake to restore, I take them apart and clean/buff and reassemble.Mechanical or gook?
-
Nice restore stressmaster! Got any tips to rejuvenate seized up scissors (modern riveted style)? I've soaked and scrubbed with everything in my bag of tricks, and I've tried to floss out any debris, but they still wont spring open nicely. The older style scissors are a piece of cake to restore, I take them apart and clean/buff and reassemble.
Mechanical or gook?
They appear visibly clean, but only open a tiny bit on their own, like 1/4 of what they should.. oiling didnt even help. On one pair i tried to bend the scissors apart gently and they broke in my hands.. so that didnt work.
I could try to pry the rivet apart more by wedges jammed in there, but my luck I'll just break them too.
-
Do they catch, like they got nicks? Or are they just tight?
-
@stressmaster5000 said:
BTW - Here is the link to my photo album for those photos. I posted smaller size, and some may want a better look at them.
https://picasaweb.google.com/113972130751178685410/SAKKnifeCleaningAndTools?authuser=0&feat=directlinkGreat job on the restoration of those scales!!! I think I read your description of how you accomplish that feat of magic somewhere, but I can't remember where it was? Maybe I just imagined it? Amazing job, though! I should be so talented.
-
"I have even used acetone when something got into the joints. Then I finish with just water to get all the soap out. I dry it and then add oil to the joints. I bought two different mineral oils. One said 90 weight. Both are super thin oil and spread throughout the knife after time. I use the Victorinox multitool oil. It is super thick like honey and stays where you put it."
Careful with the acetone - SAK scales (Cellulose Acetate Butyrate) are related to this stuff and acetone will eat into its cousin plastic.
-
I wouldn't be surprised if the butane in lighter fluid would eat (CA Butyrate) scales also. Not being a smoker I don't have any to test. ?
-
As far as solvents go, the only one I've used that didn't cause problems later-on would be white vinegar, diluted into hot water. A capful per cup. That and a toothbrush makes for a decent low-tech solution. For stubborn knives, ultrasonic machines do some of the work, but BreakFree solvent will finish the job, especially if you leave it soaking for about a week.
Haven't had luck with WD-40 for SAKs - it gets sticky sometimes.
Also tried dish soap, but that can leave a residue inside the frame, and it's hard to get out.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
