What Did You Use Your Multitool For Today?
-
Used the serrated blade on a Wave to cut apart an old plastic trash can that had splits in it. Now it should fit in the recycling bin.
-
The tiny Micra will manage to unscrew & screw about 20 of those big guys today... already managed 1/3 without a problem!


I love that tiny mighty thing more and more :D
-
We had a door we needed to lock at work, but it hasn't been locked in so long that no one knew where the key was. I took the cylinder out with my Blast, and found one that matched it, but while swapping the levers out, the actual cylinder slid out of it's sleeve and all the tumblers fell out. I managed to get them back in, but it was impossible to slide the cylinder back in and not lose any so I decided to just key it with 2 tumblers, as we are going to replace it tomorrow anyway.
Problem was, the lever that I needed to put on the new cylinder was not cut for it, so I had to use the file on my blast to remove quite a bit of metal from it to make it fit. I got it down to the right size and slapped that bad boy back together and we were rocking!
The little screws that hold the lever on the back of the cylinder are a bit small for my Blast's phillips, so my Explorer came in to save the day there. The Explorer phillips is a dream on smaller screws, I even stripped one very badly(my fault, not the SAK's), and the explorer shows no signs of wear.
My boss always teases me for carrying my tools and for being a member of forums just for tools. I showed him what they are all about tonight!
-
I ran a new electrical line and installed an outdoor outlet with my Powerlock.

-
I didn't have a spoon, and ended up using the serrated blade on my charge TTI as an eating utensil. After carefully eating dinner without cutting myself, I realized that things would've be a lot easier with the large flat head screwdriver.

-
That's a brave use of a serrated blade for sure. I've used a knife before to eat pineapple. I got a lot of strange looks as I stabbed the pineapple and ate it, but it worked.
-
I was working in my care home today doing some handyman work, i used the PT lots for tightening screws and using the pliers to untighten broken bolts on a hospital bed i had to dismantal and re-build in another room, i also used the blade on my tinker to open a few large boxes si a very Multi day :D

-
@Zed said:
I was working in my care home today doing some handyman work, i used the PT lots for tightening screws and using the pliers to untighten broken bolts on a hospital bed i had to dismantal and re-build in another room, i also used the blade on my tinker to open a few large boxes si a very Multi day :D
Cool :D Even the most boring job becomes pleasure when you use your multi :D I also had a multi-day, although it was only lots of... postage box cutting & shapping & wrapping & unwrapping... lol
-
I was working in my care home today doing some handyman work, i used the PT lots for tightening screws and using the pliers to untighten broken bolts on a hospital bed i had to dismantal and re-build in another room, i also used the blade on my tinker to open a few large boxes si a very Multi day :D

lol i had no time to get bored as it was manic :ahhh :ahhh but looking at my tools does make time go by better plus i used my drill :D
Cool :D Even the most boring job becomes pleasure when you use your multi :D I also had a multi-day, although it was only lots of... postage box cutting & shapping & wrapping & unwrapping... lol
-
Today my wife and I were out in the yard and the weed-eater broke down, instead of having to hike back up to the house to get my tools, I simply pulled out my LM Wave and had things up and running in no time. My wife was VERY impressed, and is even talking about letting me buy her a Micra! Life is good.
-
Always good to show the missus what these
toystools are good for! -
I've been using my camo Surge for last few days. I've done some repairs in the garden and both blades have been useful. Actually most what I've done could have been done just by Surge but for cutting I had my Knipex pliers and for screws a Wera driver set - I just love those and gotta admit that specific tools are often handier than jack-of-all-trades. But probably all that could have been done by Surge, that should be tried one day.
-
Use the LM ST300 to install a new clothesline.
The cutters did an OK job of cutting the stranded wire. The hard wire cutters did a beter job this time than the Stranded wire cutters of the tool.They still required a few passes to cut it though.
The pliers worked fine for pulling the wire.
The file failed at cutting it fast enough; so I used the cutters.
-
Yesterday I used my Handyman to fix a ticketing needle gun so I could finish attaching new product information graphics to some backpacks.
-
I used my cybertool to take apart my dell laptop to get at the LCD backlight.

-
@mtool78 said:
I just love those and gotta admit that specific tools are often handier than jack-of-all-trades. But probably all that could have been done by Surge, that should be tried one day.I always use the proper tools for the job when I can. Multitools are more of a "save my ass" or convenience thing. I suppose that's why I love the skeletool so much. Anything more than a blade, pliers, screwdriver and I'd rather go to my toolboxes.
-
I changed the toilet seat.
-
I cut away some fiberous debris from a garden tiller with the serrated blade on my Rebar. It might be the first time I have ever found a use for a serrated blade.

-
@powernoodle said:
I cut away some fiberous debris from a garden tiller with the serrated blade on my Rebar. It might be the first time I have ever found a use for a serrated blade.
'Some... debris"?

Looks like it got caught in a brush pile.
-
:) :tool:

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login