Old Wave or New Wave?
-
@turnsouth said:
I used an old Wave when there was nothing better, now I only use the new Wave.Never had a bit driver or a bit fail on me (as of yet anyway ;))
It is a good idea to keep an old Wave around though, because you never know if the earth will be taken over by a race that worships flat drivers, and then you would have the upper hand.


I am actually quite fond of having at least 3 flat drivers, but that's just me. I like a strong large flathead, a medium one for poking and prodding and for using on set screws, and a tiny one for eyeglasses.
-
@Mercury said:
I like a strong large flathead, a medium one for poking and prodding and for using on set screws, and a tiny one for eyeglasses.I think that you will like the new Wave Sean, it still retains the large driver/prybar, has the eyeglass screwdriver, and of course the very useful bit driver

-
When not at work I carry either my paratool or C2 again depending on what strides I am wearing, and used to carry A leatherman bit card with most common bits, There bit adapter and bit extender as this would have all bases covered no matter which tool I was carrying (leatherman bit adaptor works equally well on my paratool Phillips I have found). But now I just carry a victorinox bit wrench kit with most common bits. As not only does it mean I can handle fixings that my multi tool may not have the tooling to handle but I can use it publicly without producing a multi so no one need know I am carrying a knife if I don't want them to. And I can actually achieve more torque than I would want to put through a multi anyway.
Plus the bits are cheap and easy to replace .It can be very easy to get sucked into the whole EDC thing ( I don't mean to offend anyone) and before you know it you are carrying around 10lbs of kit you will never use. You know I am not being dropped deep into the Bolivian jungle to single handedly maintain a fleet of special ops choppers while fighting off drug barons in hand to hand combat.
Half the time I am just nipping down the shops to buy a pint of milk
-
:ahhh :ahhh :ahhh
I need an EDC air compressor and impact gun STAT!!
-
Its the Old Wave for me!
Its the slimmest OHO tool LM made, if i wanted bit drivers and stuff id go for a charge, to me the new wave is just a poor mans charge, no offense its still a good tool but for the size and weight the charge is a better option with more comfortable handles and better blade steel.
A new wave is on my shopping list though

-
Hope your feeling strong.Ps is there anyway of adding smilies with tapatalk, anyone. -

That's awesome!!
-
I still like SAK's and non locking tools, but I won't really carry them solo at all. The one exception is my sideclip. The tools are cut so perfectly that they feel like the snap into place much tighter than any other slippie tool I have. While I never rely on locks, my sideclip has never once had a driver fold on me.
-
Sean have you ever tried a Vic spirit? I would think you would take to one right away.
Stay multi my friends
-
I carried a non-locking buck folding pocket knife for about 12 years with not a single problem. I have yet in my life to have a blade fold on me.
I have several small keychain MTs that don't lock and have never presented a problem. It's when you start to get into heavier use that locking becomes a serious issue. If I had to chose, I'd prefer locking drivers to locking blades. By their nature, drivers have a lot of forward force placed on them, where a non-locking one might fold on you. This can be somewhat mitigated by the design of the driver, as I mentioned in my comparison of the PST and the Sheffield 1200E.
/post/592550
I HAVE busted up knuckles on drivers folding on me.I have carried a Delica in my EDC more-or-less constantly for about 15 years. However, I have never once needed an OHO blade in that time. So, OHO for many people, apparently myself included, is simply not needed, and as every OHO design has to add something, you can save space, weight, and probably steps in manufacture if you leave it out. I just can't bring myself to NOT have an OHO blade though, for whatever reason. I start feeling all weird without one.
-
I totally agree. I need locking drivers WAY more than locking blades. In fact, for daily carry I could go all slipjoint and be fine. I had a kick driver fold on my once and it didn't feel good. My hand got smashed as a result.
Ryan, I have tried the spirit, and I keep selling them for some reason. Don't know why. they are awesome tools and I would love to have another.
-
Amici,
I went with the OLD wave since although I do own several of the new version, the old one still manages itself into my EDC from time to time, wobbles and all.Cheers.
Serge -
Long time so see there Serge! Glad to hear from ya!
-
Grazie mi amici!
-
the old wave's non locking drivers can and will fold up on you.
This is the deciding factor, and why locking multi-tools beat out SAK's every day of the week. There's just no reason anymore to make nonlocking tools (or, aside from stupid legalities, nonlocking or non-OHO knives).
I am a recent conver to this as well. I love the form factor of the original wave, My hands must be small or something because the newere leatherman pliers all open too wide. (and frankly I wanted to throw the sidekick and wingman at mr leatherman when I discovered they are even wider than the wave/blast/st300) BUT I had my kick bite a hunk out of me when the phillips folded up on me.
So I agree Locking tools all the way.
However. I am currently going best of both worlds, with a Charge, and Swisstool Spirit combo.
I cant see giving up my spirit because I use scissors so much. But the rebar is a beautiful looking tool, and the replaceable wire cutters are awesome, and hopefully going to be incorporated into the full line at some point.
Im iffy on the bit driver. the full size is ok, I have used the eyeglsss driver, but it just seems out of place on my wave/charge/blast. and I wish they had longer bits, not MUT long, but if they added another half a bit length that would be sweet.I also like the new scissors better. they cut better, they dont splay, they may be "smaller" but I dare anyone to find something that the old style actually cuts better than the new. I havent found anything.
I do really wish LM would make the opening size adjustable, because they are about to size me into another brands market, just because I apparently dont have Giant hands. Leverage is one thing, but the sidekick/wingman is ridiculous. I dont even like the new skeletools.
-
I believe new one have advantage for locking system in all tools...
-
Yeah, so , it comes down to which is more important, better implements, or locking implements? Feh. :-[
They each have their advantages and disadvantages. Makes it hard to choose one over the other.
I really, Really, REALLY wish LM had put the bit holders on the Charge, and left the "normal" Phillips and flat drivers on the Wave. Seems to me that would help differentiate two otherwise very similar products.
-
I carried an "old wave" around 11 years but unfortunatelly was stolen from my truck and then I get the new wave and its very good but definetelly some times I miss the old version.,,,
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login