Left-handed OHO for Trekker?
-
I think I'd love an Explorer in new condition, with a non-screwed-up phillips. I really need to send that thing off and shut up about it.
I've thought a fair bit about the usefulness of a locking flathead. I saw a video review of the Trekker, and it looks seriously beefy.
I've carried a Delica for about 15 years, off-and-on. It has a busted tip, thanks to me handing it off to someone for a few minutes, and them deciding the fine tip should make a good pry tool.
I had to file it back to a point so the spine makes a little dip at the tip now. :-\I like the Tinker. I like the Delica. I'm assuming the Trekker will be a good combination of the two.
-
Amici,
I also have a OHO trekker as well as the original version, and the Bundeswehr soldier version that's the current issue.As a "southpaw" I have to say the the OHO works remarkably well as if were designed to be when in all actuality it wasn't.
It seems that most european countries besides being anti-firearms, but most are also anti- anything that could be considered as or used as a weapon.
Since the majority of folks are right handed, it only made sense for the Swiss to develop a design that would prove too cumbersome for the right handed majority to possibly use as a tactical weapon. So there you have it, a loss for the righties, but a big win for the lefties.
I use my OHO Trekker this as my primary EDC when I go off into the field, but in a kydex sheath in a necker configuration. Works remarkably well..
Cheers,
Serge -
@sergemaster said:
Amici,
I also have a OHO trekker as well as the original version, and the Bundeswehr soldier version that's the current issue.As a "southpaw" I have to say the the OHO works remarkably well as if were designed to be when in all actuality it wasn't.
It seems that most european countries besides being anti-firearms, but most are also anti- anything that could be considered as or used as a weapon.
Since the majority of folks are right handed, it only made sense for the Swiss to develop a design that would prove too cumbersome for the right handed majority to possibly use as a tactical weapon. So there you have it, a loss for the righties, but a big win for the lefties.
I use my OHO Trekker this as my primary EDC when I go off into the field, but in a kydex sheath in a necker configuration. Works remarkably well..
Cheers,
SergeWell I agree that the SAK isn't designed as a weapon, they get issued these instead:


Not sure how quickly a knife unlocks would affect its use as a weapon either.

-
Amici,
I'm guessing that maybe one of the yodeling folks from a Ricola commercial or maybe even Dr. Frankenstein himself could supply the answer on this one!Cheers,
Serge -
I don't think it has anything to do with weapon or not, if you look at the implements (i.e. single locking liner for both blade and screwdriver) it's simply the best way to arrange them. Quick deployment and closing that we are used to with all the tac folders probably isn't one of the design criteria.
-
So let us know what you think of your new OHT Lynn!
@jzmtl said:
I don't think it has anything to do with weapon or not, if you look at the implements (i.e. single locking liner for both blade and screwdriver) it's simply the best way to arrange them. Quick deployment and closing that we are used to with all the tac folders probably isn't one of the design criteria.Agreed. It's meant to be a camp/hike etc. knife, not a 'slink through the jungle and slash throats' kind of knife...

-
It's here, it's here!!!
Wohooooo!!!!
To answer my own question, and in the event any other left-handed users want to know: Deploying the blade takes more force to overcome the retention than my Spyderco Delica, but once that initial little push is made, it opens as smoothly as the Delica. It is also quite simple to close left-handed... and this is the FIRST knife I've ever encountered like that. Ever.
So... AWESOME!
I also have absolutely no problem deploying the blade right-handed. Closing it is a bit of a trick right-handed though. It probably won't be as big a deal for right-handed folks who have better manual dexterity in that hand, though.
The knife's handle is thicker than the Delica, making grip on the tool better for blade deployment. While the Delica opens easily, keeping your fingers gripped on the handle is a more delicate procedure. Once open, the blade is perfectly stable side-to-side, and has just the tiniest amount for forward/back play (like the thickness of a sheet of paper. I have seen many reviews on this tool, and i know most lock open rock solid. The play in mine is so minimal that it does not matter to me in the least, and I have no fear of the tool failing.
The serrations are insanely sharp. I have a few less layers of skin on my right index finger to testify to the fact.
If I had sculpted a handle to comfortably fit my hand, it would not be far off from the dimensions of this knife. It fits VERY nicely in-hand with blade open. It also seems as though the size of the hole in the blade will allow opening with gloves on with no problem. The texturing on the scale makes it feel like the grip is secure.
I LOVE the locking flathead/cap lifter. It inspires a great deal of confidence. The can opener/small flathead is the same as is found on the 91mm, as is the phillips. The reamer on the Trekker doesn't have the eye hole but is otherwise the same as on my Tinker.
As a solution to replacing Tinker/Delica, I think this Trekker will work out very well. I've never been a huge fan of semi-serrated blades, but if I had to have one, I'd prefer the serrations toward the tip, useful for cutting food, and non-serrate back, useful for cutting wood where it's better to have good leverage. We'll see how this works out, but initial impression is almost all positive.
-
Isn't it nice to see a lefty-friendly option to something?
I have a New Soldier, it lives in my bag, and it's a great knife. Now, Lynn, for the big question - how does the 111mm handle affect can opener performance?
:) -

As of yet, untested, but I assume no performance improvement or degradation. :D
-
I carry my SG OH PE Trekker a good bit and like it. With use, familiarity, or the right lubricant, it seems to open fine for me. I only comment because I have seen a couple of complaints. Maybe that would be true for Wenger Rangers too, but I find those very hard to open. I agree the Trekker is more a left handed design. I can close it OK as a righty, but find it closes better with my left hand or if one turns it top down, in other words with backtools facing up. Then one can more easily use the R hand index finger to push the lock over. Two hands work too. ;) I probably usually drag the locking bar over with my thumb, but the left hand is better.
I am sure there are good design reasons to mate with the associated parts such as backsprings, backtools, and the like for the way the knife is designed. Still I can easily visualize the left handed designer chuckling every time he walks by the Trekker assembly area.

-
I love those Stay-glow scales. I would have preferred them to the black on mine, but the price was great on this, so I took what I could get. I would have also preferred the non-serrated blade. Hey, Donald... wanna trade? :D
-
Glad to hear you're happy with the one-handed Trekker, Lynn.
There are times when I wish it was a full plain edge, but I always have the Rambler for that, if needed.
Why don't you try carrying just that for a week or so, and let us know how it goes?
-
No thank you Lynn. I like the SG too. :) I really think they should make the SG PE OH Trekker a standard item. I know people looking for them.
The serrations cut great, but I prefer the plain edge. If they made the serrated blade symmetrical I would like them better. I have seen another design slots cut with a laser or something, but the only one I can think of are the ones that Chris Reeve does on those knives of his that had some serrations. That way they can be sharpened on a flat stone and they are symmetrical, i.e. same angle on both sides of the edge. While I'm wishing, wish they were plus scales!

-
P.S. More StayGlow!


Lynn you get a StayGlow Classic as a companion to your OH Trekker.
-
Donald... now you're just rubbing salt in my wound, aren't you? :D
This tool has gone into my EDC, and I'll see what I think of it as a replacement for the Tinker and Delica. So far, I have a very favorable feeling about it.
It, along with my two keychain scale MTs are still lighter than the Leatherman Wave (which would be the other OHO alternative available to me at the moment).
-
Inspired a bit by this thread, I decided to carry my New Soldier in place of my Kershaw Needs Work and separate SAK. I like the New Soldier and have played with it quite a bit, but really haven't used it much for some reason. The past two days have fixed that. The verdict? It's going to be going to work with me again tomorrow.
didn't miss my OHO Kershaw at all. In fact, the serrated blade works better as a cardboard box buster. The other tools did everything my usual SAK does - prying, driving screws, opening tint cans, and it even put a new hole in my belt (in a good direction :) ). The only thing I was missing were scissors and T&T, but that was no big deal with my ever present Executive on my keys. It's a bit big for casual carry, but damn is it a worker. -
And your gift of the Tinker got me interested in the Vics. So, kind of a Karmic circle. Very glad you're finding joy in your Soldier.
-
Have you tried using the saw for any period of time?
I found the Trekka pretty uncomfortable when using the saw due to the OHO hole sitting proud of the knife. For this reason I bought a Forrester for play time in the woods and retired the Trekka to the "box of many shiny things that aren't used much".
I came to the conclusion that comfort during use and a plain edge blade were more important to me than speedy blade deployment. Both great knives of course, they would be because they are SAK's!
Atb, Jon.
-
I don't do anything that requires a saw on a day-to-day basis. The OHO is one of the reasons I got the Trekker. It's replaced a Delica and Tinker in my EDC, having the saw at all is just kind of a bonus.
I've just today done my first work with the Trekker saw, and it was actually the best of the bunch of MTs that I tested for ability/comfort. The saw test...
/topic/37422If I had to do any large amount of sawing, I'd rather have a dedicated saw.
-
Amici,
Althought the OHT is very cool, I have to give the nod to the Wenger 156 when it comes to over comfort as well as high marks in the saw cutting dept.Cheers,
Serge
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login