Saw test
-
Thanks kindly.
Along with being happy with the Trekker, it adds another thumbs-up on my opinion of the Wave, which is already pretty high.
And minus the fact that the longer tools are hard to extract from the Sheffield 17-in-1, it's turning out to be a pretty good tool for $15. I wouldn't choose it over a Leatherman, but it's not a bad option for the cash-strapped.
As a side note, I found the Dave Canterbury video I mentioned in the first post...
Building a Discount Bushcraft Kit Part 3 (Food) -
Thank you Lynn.
I really appreciate your tests, and the explanation of the findings.
So, the Wave gets your vote, just out of this group? Or out of all your tools (with saws)?Beth
-
Specifically for saw use...
I'd consider the Sheffield 17-in-1 adequate for the task, as well as the Vice grip/sawblade. They both got the task done, and weren't too demanding. I consider the Wave very good at the task. It cut quickly and easily. The only downside was some discomfort in holding the tool. I consider the Victorinox Trekker the best. It cuts the wood as well as the Wave, has a slightly longer blade, which with a saw seems to matter a good deal, and is more comfortable.So, anyway, the straight-up answer is: Wave is very good, Trekker is a little better... for this task. I'd recommend either, depending on the form factor you like better and how much weight you're willing to carry.
Overall...
There are too many factors to say the Wave or Trekker is 'better'. I'm left-handed and want a one-hand-opening blade to carry with me. For this, the Trekker is good and the Wave is not. There's a discussion about this very issue in the 'Left-handed OHO for Trekker?' thread. Feel free to check that out.
/topic/37308Both the Wave and Trekker are excellent tools, and I'm very happy to own both. I carry the Trekker, along with two small key-chain size multitools to cover what I consider my likely tool needs. For the same weight as those three tools, I could instead carry the Wave, with diminished ability in some areas, and greatly improved ability in others. I hope that was helpful, and not as rambley as it sounds to me. :D
-

Sent from Ash forum mobile
-
I'm just happy the Vic product won, or this thread would be a dangerous place...

I would think twice about posting the result of any saw test where Vic didn't win or any file test where Leatherman didn't win... ;)
BS aside, excellent to see your tests again, Lynn! I really like these comparisons.

Do you think the more rounded handle of the Charge series would be better in the hand for sawing than the Wave?
-
I am another huge fan of the Vic saw. Even the shorter 91/93mm and 84mm ones work superbly.
Thanks for sharing your thoughts Lynn. -
Great test.
I'd love to see a comparison of the vic 84mm/91mm/93mm/108mm saws.

-
Thanks for test Ash

The LM wave and Trekker are my preferred MT, both have a very good saw but definitely as you mentioned the Trekker is much confortable.
The Wenger Ranger also have a very good saw, I believe its similar compared with the Trekker. -
@user24 said:
I'd love to see a comparison of the vic 84mm/91mm/93mm/108mm saws.
I don't think we need one. They're all cut the same, and have proper spine relief; the only difference is length; obviously a longer saw cuts in fewer strokes, and can tackle thicker material.
But hey, if Ash has more branches to clear from his yard, and a lotta time on his hands, go for it! :)
-
Just some... emm... notes. It's Lynn, not Ash... and 'she' or 'her' not 'he' or 'his' (for both Ash and Lynn)
However, Ashley is more than welcome to share in the testing if she'd like. Ash, care to link that thread with the video you did of the saw testing?
As for testing the Charge and various sizes of Vics... I'd LOVE to, please PM me for my address where you can send me free stuff, so I can test it.

In all seriousness... I'd guess the Charge might be a bit more comfortable in-hand than the Wave.
-
Excellent review!
From my own experience, there's also a difference when cutting green wood and kiln dried wood. The Leatherman saw has smaller teeth and cuts kiln dried wood better than the Vic (imo). On green wood, the Leatherman is a bit slower and tends to get clogged by wet wood bits.
The Vic, otoh, is more aggressive and tends to jam more on kiln dried wood but rips through green wood famously.
Might be worth a test addendum....

:D
-
Gryffin:It's all good. Just thought I'd clarify. I'm not trying to make anyone feel bad.
Mr. Whippy: Interesting.... I might have to go do head-to head Trekker v Wave to see how they fair.
-
Okay... I took my hedge clippers, pruner, and the Wave and Trekker into the back yard and did some trimming. Obviously, this was all green stuff. If the clippers and pruner wouldn't handle it, the job fell to the Wave and Trekker. I tried to alternate, and give each one a shot at each given species, as fairly as I could. These plants were about a 1/2" (13mm) thick in general.
Both the Wave and Trekker cut them quickly. I think with additional testing, the longer stroke of the Trekker made it noticeably faster at the task, but not by a huge amount. I'd guess it's about 30% faster than the Wave.
Once done, I blew as much crud out of each as I could. Here's what they looked like afterward...

So, here I have two tools, both covered in crud, and I'm pondering how to clean them. If only I had something I could use to PICK the TEETH of these... Wait a minute! :D I pull the toothpick out of the Trekker, and use it to pick the plant debris out of the teeth. It's not a difficult task. So, now I'm looking at the Wave, and thinking I'm seeing a problem. If only IT had a small, pick-like BIT that could be removed to use for... Wait a minute! :D So, I pull the small flat-head bit from the small bit holder, and use it to clean the Wave's saw. The Wave might have the slight advantage in the cleaning department if something was particularly stubborn. The metal small bit was much more resilient, obviously, than the Trekker's toothpick. But really, both worked fine to clean their respective saws.
I didn't notice that one saw clogged up more than the other. On another day, cutting a different selection of plants, maybe I would.
Still a close race on green plants, but I'm sticking with a slight victory for the Trekker, although both did the job great. Also, on the softer green plants, compared to the oak branch from yesterday, I didn't notice as much discomfort using the Wave. These things both cut the softer green plants like champs, and I was very impressed.
-
I've noticed that the reciprocating saw blades aren't really sharp out of the box, not even close compare to the double tooth design on vic/lm (the knockoff tend to have dull teeth too). If you sharpen them they tend to work a bit better.
-
Lynn:
Thanks for the reviews!This past weekend I needed a saw to cut some reliefs from pine boards used for shelving. Only needed to cut about 1.25" or 30cm from them. I reached for my OHTrekker and then remembered that I left it home because I had the Wave on my belt.
The Wave's cut on the pull only saw was not what I was hoping for as it was harder to start the cut and was not as fast as I am accustomed to. LM saws are OK, but can't match the VIC saws for speed and ease of use.
-
Awesome review lynn!
As for the discomfort using the wave i can see that. I saw a post asking about the charge, and i think it would make a world of difference for comfort because charge handles are the cats meow. I will test mine tonight if i can. I want to pit my charge against my rebar anyway.
Sent from my myphone using Crapatalk
-
So I picked up a $2 pack of Buck Bros. keyhole saw blades. One was for wood and one for metal.
The blades are about 6 1/4" (159mm) in length.
I tested the wood blade clamped in the vice grips against the Victorinox on the same stick I used for initial testing, and I have to give a slight advantage to the saw blade/vice grips.
So, $2 for the vice grips, and $2 for two blades, and you can have a decent saw. Interesting.
-
Now you need to get a Leatherman Crunch >:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
