Swisschamp Sharpening Blues
-
Do you have black compound? If so use the black for a while and that should bring your edge back then work down to the green and white if you have it.
Sent from Ash forum mobile
-
Sounds like maybe you used too much pressure?
-
Sounds to me like you need to properly sharpen the blade. From your description, you probably should be re-profiling the edge. By hand, it will probably take a while...
And get rid of that blade wrecking piece of junk that you currently have.
Dave
Sent from my iPhone4
-
You can fix it with the large ceramic rod but it will take quite some time. Maybe 15 - 30 minutes. Keep cleaning the rod when it gets visibly clogged.
-
Dave wrote:
And get rid of that blade wrecking piece of junk that you currently have.
Amici,
Tell me about it, but life is all about lessons and a lesson in sharpening I certainly did learn!
Well I was able to remove the burrs using black compound on a strop as well as white. I also used a sharpening steel to ensure that if there were any that I missed, the steel would make quick work of it.
Now that it's good as new, I believe it's time to invest in a Spyderco Sharpmaker!
Cheers,
Serge -
I use a Edge Apex.
-
Save money and get a great system at the same time. Lansky 4 rod turnbox.
-
@sergemaster said:
Dave wrote:And get rid of that blade wrecking piece of junk that you currently have.
Amici,
Tell me about it, but life is all about lessons and a lesson in sharpening I certainly did learn!
Well I was able to remove the burrs using black compound on a strop as well as white. I also used a sharpening steel to ensure that if there were any that I missed, the steel would make quick work of it.
**Now that it's good as new, I believe it's time to invest in a Spyderco Sharpmaker!
**
Cheers,
SergeYou really won't regret doing that

-
@Mike, Lord of the Spammers! said:
Dave wrote:
**Now that it's good as new, I believe it's time to invest in a Spyderco Sharpmaker!
**
Cheers,
SergeYou really won't regret doing that

Agreed -->> Sharpmaker story
-
+1 for the Sharpmaker! If you can hold a knife straight-up-and-down then you can get a razor's edge on just about any blade. Even a dummy like me can get great results with the Sharpmaker!

The old Schrade Uncle Henry folding hunter in that photo above was given to me by a neighbor who had beaten that poor blade half to death for the past 40 years. It was so dull you would have had to heat it up just to cut butter. It took about 10 minutes on my Sharpmaker to bring that edge back to life and nearly shaving sharp!
I bought the additional diamond and ultra fine rods when I got mine about a year ago. I highly recommend the ultra fine rods if you really want a keen edge. But I won't recommend the diamond rods unless you need to re-profile a lot of knives. I have used mine once in the last year. The brown, medium, and white, fine, rods that come with the Sharpmaker are really all you need. I use the SM on all of my knives. From tactical and traditional, right down to my SAK's. I absolutely swear by the Sharpmaker! It's one of the best investments I have ever made!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
