Battery Preferences
-
cr123 for me.
-
my preference for an edc light is AAA or rcr123 then 18650.
-
@tattoosteve99 said:
Well I guess I'm the oddball of the bunch. I prefer rcr123. That's rechargeable cr123 for those who dont know. Other than that a high quality rechargeable AA and AAA are never bad options. 18650 are very popular also.I'm with you - RCR123 is always my 1st choice. I do have a couple of AA and AAA lights too, and a few 18650 sized, but for EDC it always comes down to RCR123.
-
I have two AAA's, two 2xAAA's, two CR123, one 18650, one AA, and one which I can set up to take AA, 2xAA or CR123 ... and it's set for the CR123. My preference depends what type of light I'll need that day. I think prefer a CR123 on the whole, but am actually more likely to have a AAA on me I think :-\
-
I'm a diehard fan of the 1xAA form factor. My EDC rotation are all capable of taking 14500 lithium-ion cells for equal or better performance as CR123A -based lights, and also run well on the Eneloops I keep in my bag for backup, and of course if those all run out I can scrounge alkaline cells from just about anywhere.
I gotta say, though, that some 1xAAA-sized lights are looking pretty dang good. I just picked up a Lumapower LM21, and it's spending a lot of time in my pocket so far; HA-III, three output levels, forward-clicky switch, 10440 LiIon-capable at all levels, and output comparable to CR123A lights of not that long ago, but at half the size and weight. And of course, AAA cells are just about as easy to scrounge as AA, if it comes to it.
(Of course, I still have an AA light in the bag for backup...)
-
@Gryffin said:
I'm a diehard fan of the 1xAA form factor. My EDC rotation are all capable of taking 14500 lithium-ion cells for equal or better performance as CR123A -based lights, and also run well on the Eneloops I keep in my bag for backup, and of course if those all run out I can scrounge alkaline cells from just about anywhere.This is my philosophy too for the most part. I've been a die hard AA guy for a long time and I prefer 1xAA lights for EDC as well. I am also a big 18650 fan as well, and it's my second most used battery format. In fact, I found that I've inadvertently been going with 1x18650 lights for EDC and have shifted my best AA format lights to dedicated emergency or recreational purposes. I put my PA40 (4xAA) in the glove box of my wife's mom-mobile, and my HCRI Quark with an AA^2 body in my hiking pack. So all the lights that I am most likely to need replacement cells for are AA based lights, and my personal carry items and larger, heavy duty lights are 18650 based. After that, AAA is a distant third in my usage. My regular flashlight EDC is a Q-mini AA R4, HCRI Q-AA, HCRI Preon 2, Zebralight SC60w, and a Zebralight H51w.
-
AAA or AA for me as they're easy to find.
-
AA for me. I use disposable alkalines because I can find them anywhere from a ranger station at a national park, to a two pump gas station in a shanty town of twenty people.
I also use AAA ones around the house and at work. The small size is convenient for carry.
-
I go for common availability over performance, so another AA/AAA fan here. The way I see it, my AAA light may run out before yours, but when it does I'll find a replacement battery before you do.
Having said that, I did read somewhere that during a disaster, the stores tend to run out of AA/AAA batteries before the fancier ones, because everyone's buying them. Don't know if that's true, but it sounds believable and might be worth considering for some people.
-
@user24 said:
Having said that, I did read somewhere that during a disaster, the stores tend to run out of AA/AAA batteries before the fancier ones, because everyone's buying them. Don't know if that's true, but it sounds believable and might be worth considering for some people.During a disaster situation everything changes as far as procurement goes. For those of us who live in an area/country with natural and man made disasters know that preparation is the key to thriving. I wouldn't count on anything being at any store during or immediately after a disaster.
-
@turnsouth said:
I wouldn't count on anything being at any store during or immediately after a disaster.good point

-
My main light is AA and the backup is AAA. Both running on eneloops with spares in my EDC organizer.
-
@mvyrmnd said:
I voted for "Something Else" as my two primary flashlights use 18350 and 32650 batteries.In order of most used to least used for me:
18350
32650
18650
14500
16340
AA
AAAI have a feeling you might be in the minority with that lineup...
I'd go AA. Easy to get, easy to use, available everywhere. AAA would be my second choice.
-
@jock1 said:
Another vote for AA or AAA I tend to run my torches on disposable alkalines
I know I should get around to eneloops or something similarBesides "going green," there's another good reason to go with Eneloops: better performance. Alkalines just can't deliver the current that modern, high-performance flashlights require. So if you're using good lights, you'll get more out of 'em on NiMH.
-
@turnsouth said:
During a disaster situation everything changes as far as procurement goes. For those of us who live in an area/country with natural and man made disasters know that preparation is the key to thriving. I wouldn't count on anything being at any store during or immediately after a disaster.That's the only reason I keep alkies around, for emergencies.
But that's also one of the advantages to AA/AAA: even if the stores run out, you always scavenge partially-used cells from remotes, radios, toys, clocks, gadgets... Good luck scrounging up some CR123As that way.
-
Thank you all for helping with my research. I have a better understanding of how others choose and use their lights. I'm not surprised with the outcome of the poll.
In the coming weeks, I will be working to add some ZebraLight items to The Multitool.org Store, this poll will be useful in choosing pieces.
-
During a disaster situation everything changes as far as procurement goes. For those of us who live in an area/country with natural and man made disasters know that preparation is the key to thriving. I wouldn't count on anything being at any store during or immediately after a disaster.
That's the only reason I keep alkies around, for emergencies.
But that's also one of the advantages to AA/AAA: even if the stores run out, you always scavenge partially-used cells from remotes, radios, toys, clocks, gadgets... Good luck scrounging up some CR123As that way.
I don't even stock alkies anymore... they're just too unreliable. I've had brand new ones puke their guts out just sitting on a shelf waiting to be used.
I only keep L91's and L92's on hand as backups anymore, they have the full 10 year shelf life, and don't puke like alkies do. They also are the only primary (other than 123s) that can hold high drain rates for things like LED torches, the same way eneloops can. In fact, I've gotten my Quark 123^2 head (3 - 9 volts) to fire up and work flawlessly on 2xL91's in an AA^2 body.
With the new primaries with the lithium chemistry, and a well designed modern torch with a good driver in it, there's no reason to use 123s anymore, unless you already have an investment in the form factor.
-
I still like CR123, but I'm very quietly joining the AA club . I am really enjoying a NiteCore D10 that I modded with a XPG emitter. So many battery options with this light .
Nimh, Ni-cad, lithium, alkaline, 14500, and the new 14505. The D10 will work with all of these. The 14505 really narrows the gap between CR123 and AA primary disposables.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login