Skip to content
  • Categories
  • Recent
  • Popular
  • World
Skins
  • Light
  • Dark

Collapse

NodeBB

Sharpening SAK'S with Lansky

Scheduled Pinned Locked Moved General Tool Discussion
33 Posts 1 Posters 9.1k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • captain spauldingC
    captain spauldingC
    captain spaulding
    wrote on last edited by
    #1

    I tried sharpening a SAK with my Lansky Sharpener and i'm just not getting great results. I used all the stones as well as the Sapphire finishing stone. I did the large blade first at 20 degrees and got it sharper, but nothing close to how it came from the factory. Next was the small blade which I decided to do at 25 degrees. when checking the edge with the all so simple thumb test from left to right it felt good, but I ran it right to left and it felt dull like I rolled the edge. Is it just me or do I still need to get used to the Lansky system? Should I use less pressure on the stones as I move to the finer stones or use the same pressure for all the stones? Any help would be appreciated.

    1 Reply Last reply
    0
    • MetropolicityM
      MetropolicityM
      Metropolicity
      wrote on last edited by
      #2

      I did my Deluxe tinker the other day and used the 25 degree setting (3rd hole fr bottom). I have the diamond set and went through the three gamut and finished with a super sapphire blue hone and it came out razor and sparkly.

      The steel is pretty soft but one smooth stroke should get you from tail to tip.

      1 Reply Last reply
      0
      • captain spauldingC
        captain spauldingC
        captain spaulding
        wrote on last edited by
        #3

        How many passes do you do per stone?

        1 Reply Last reply
        0
        • MetropolicityM
          MetropolicityM
          Metropolicity
          wrote on last edited by
          #4

          @captain spaulding said:
          How many passes do you do per stone?

          I think I only use the medium grit at 30 per side, then fine at 20, then 10 per side. The sapphire at 40.

          I also did 10 light passes on the 30 degree with the sapphire to give a micro bevel.

          1 Reply Last reply
          0
          • captain spauldingC
            captain spauldingC
            captain spaulding
            wrote on last edited by
            #5

            Alright thanks. :tu:

            1 Reply Last reply
            0
            • Sparky415S
              Sparky415S
              Sparky415
              wrote on last edited by
              #6

              Captain

              I would try going back a grit and <u>using a sharpie</u> (I also use a desk light and magnifier) the first time you use it on a blade you will need more time with the coarse stones, I know on Utube they only take 30 seconds ::)

              Not to be rude but maybe you need more patience and time at the beginning? :think:

              When I first got my lansky system I practiced on my Spartan, I have a 17* and a 20* edge on the two blades and just use a leather strop now 🙂

              Good luck :cheers:

              1 Reply Last reply
              0
              • M
                M
                mvyrmnd
                wrote on last edited by
                #7

                I've found that too - the first time you sharpen a blade on the Lansky you effectively have to re-profile the edge to set it to the angle you're using.

                It takes a while, but worth it in the end.

                1 Reply Last reply
                0
                • S
                  S
                  Styerman
                  wrote on last edited by
                  #8

                  The first few times a sharpie and a lo powered magnifier are handy , nice to see where you are hitting .

                  That pretty much goes for any system . Second piece of advice , practice on reasonable quality paring knives ( Vic. , or Henkels with the cast plastic handles - cost about $3.95 ) .

                  Chris

                  1 Reply Last reply
                  0
                  • captain spauldingC
                    captain spauldingC
                    captain spaulding
                    wrote on last edited by
                    #9

                    Thank you everyone for all the great advice. :tu:

                    I have a desk light setup as well as a magnifying glass handy. I will definitely use a sharpie to find out what exactly is going on.

                    @sparky415 said:
                    Captain

                    Not to be rude but maybe you need more patience and time at the beginning? :think:

                    Good luck :cheers:

                    I definitely agree with you there. The thing that I don't understand is I used the same Lansky sharpener to put a pretty good edge on a old Spyderco Delica. Everything worked out great and it was actually the first time I ever used the Lansky. Once I try and sharpen a SAK it just never works out. I do completely agree I need to be patient. :salute:

                    1 Reply Last reply
                    0
                    • Sparky415S
                      Sparky415S
                      Sparky415
                      wrote on last edited by
                      #10

                      Good luck with it Mate :tu:

                      1 Reply Last reply
                      0
                      • A
                        A
                        AimlessWanderer
                        wrote on last edited by
                        #11

                        @mvyrmnd said:
                        I've found that too - the first time you sharpen a blade on the Lansky you effectively have to re-profile the edge to set it to the angle you're using.

                        It takes a while, but worth it in the end.

                        This for me is the problem with using the Lansky. If you try to sharpen a different knife, or grip it different to last time, you have to remove a lot of material before you get anywhere near the edge. Getting a Lansky was the best thing I did regarding knife sharpening, because it taught me I need to learn how to sharpen freehand. As it happens I still use the Lansky from time to time ... for reprofiling

                        1 Reply Last reply
                        0
                        • captain spauldingC
                          captain spauldingC
                          captain spaulding
                          wrote on last edited by
                          #12

                          @50ft-trad said:

                          @mvyrmnd said:

                          I've found that too - the first time you sharpen a blade on the Lansky you effectively have to re-profile the edge to set it to the angle you're using.

                          It takes a while, but worth it in the end.

                          This for me is the problem with using the Lansky. If you try to sharpen a different knife, or grip it different to last time, you have to remove a lot of material before you get anywhere near the edge. Getting a Lansky was the best thing I did regarding knife sharpening, because it taught me I need to learn how to sharpen freehand. As it happens I still use the Lansky from time to time ... for reprofiling

                          I'm thinking this might be what happens to me, but only time will tell.

                          1 Reply Last reply
                          0
                          • sergemasterS
                            sergemasterS
                            sergemaster
                            wrote on last edited by
                            #13

                            Amici,
                            Add me to the club of unsatisfied Lansky users. The time I owned one which was quite a few years ago, I was never a big fan of the results. Also as a southpaw, I found it a tad cumbersome.. Next in my book will be a Spyderco Sharpmaker, since I've heard nothing but great results..

                            Cheers,
                            Serge

                            1 Reply Last reply
                            0
                            • E
                              E
                              EddieEnzyme
                              wrote on last edited by
                              #14

                              I'm sure I read somewhere that Vic's factory grind is 30 Degrees, meaning that the Lansky's 25 degrees won't actually be touching the edge, more the "shoulders" of the edge until the angle is eventually reprofiled..

                              1 Reply Last reply
                              0
                              • captain spauldingC
                                captain spauldingC
                                captain spaulding
                                wrote on last edited by
                                #15

                                @EddieEnzyme said:
                                I'm sure I read somewhere that Vic's factory grind is 30 Degrees, meaning that the Lansky's 25 degrees won't actually be touching the edge, more the "shoulders" of the edge until the angle is eventually reprofiled..

                                I though Vic's grind was 25 Degrees? :think:I definitely could be wrong though.

                                1 Reply Last reply
                                0
                                • MetropolicityM
                                  MetropolicityM
                                  Metropolicity
                                  wrote on last edited by
                                  #16

                                  @EddieEnzyme said:
                                  I'm sure I read somewhere that Vic's factory grind is 30 Degrees, meaning that the Lansky's 25 degrees won't actually be touching the edge, more the "shoulders" of the edge until the angle is eventually reprofiled..

                                  I did the initial marker grind test and 25 on the dot.

                                  1 Reply Last reply
                                  0
                                  • E
                                    E
                                    EddieEnzyme
                                    wrote on last edited by
                                    #17

                                    @Metropolicity said:

                                    @EddieEnzyme said:

                                    I'm sure I read somewhere that Vic's factory grind is 30 Degrees, meaning that the Lansky's 25 degrees won't actually be touching the edge, more the "shoulders" of the edge until the angle is eventually reprofiled..

                                    I did the initial marker grind test and 25 on the dot.

                                    Ah well, that's that idea out of the window.

                                    Heh heh!

                                    1 Reply Last reply
                                    0
                                    • E
                                      E
                                      EddieEnzyme
                                      wrote on last edited by
                                      #18

                                      Aha - found it!

                                      From Victorinox.com, care and preservation section:

                                      Sharpening

                                      Re-sharpen using a whetstone at an angle of 15° - 20°. This will result in a cutting angle of 30° - 40°. If sharpening on a grinding wheel, always cool with plenty of water to avoid excessive temperatures.

                                      I knew I wasn't going mental.

                                      1 Reply Last reply
                                      0
                                      • F
                                        F
                                        Frankctz
                                        wrote on last edited by
                                        #19

                                        I just received my lansky delux system and try to sharp a GAK aitor and basically same problem as the first post, could no sharp as good as I would like, I will continue trying but probably need more practice and correct angle, probably a little reprofile...So, I will continue trying/practice

                                        1 Reply Last reply
                                        0
                                        • A
                                          A
                                          Aleister
                                          wrote on last edited by
                                          #20

                                          I am having great and fast results sharpening SAKs with lansky 5-stone sharpening kit (usually I use just 280 and then 1000 hones for retouching), leathermans are another story though.

                                          On the other hand, I am finding myself using manually the lansky hones (or other sharpening stones) on my knives more and more as I am learning how to manually sharpen knives.

                                          So, even if Lansky slowly becomes less useful for me, it helped me learn how to manually sharpen knives better. Just like using training wheels to learn how to ride a bike.

                                          1 Reply Last reply
                                          0

                                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                          With your input, this post could be even better 💗

                                          Register Login

                                          • Login

                                          • Don't have an account? Register

                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Popular
                                          • World