Alox krinking
-
Or maybe a non-centered blade? If that's the case, some, but not all, Alox Solos have centered main blades; some do have the offset blade meant for other alox models, though.
-
Maybe he wants a bowie type blade.. or maybe not.
I'm confused.
-
crinking a blade on a folder means to bend and adjust it so it will fit better when folding in. Like the main blade on a pioneer is bent. The SI is bent too though so not quite sure what he means. The solo did have a straight blade thats the only alox I have that does.
-
I've seen pics here and there of non krinked and krinked Wenger SI blades. The SI's I checked out at Gander Mountain a couple of years ago all had krinked blades. I believe that all the 93mm Vic Alox blades are krinked including the Solo.
-
@APS said:
I've seen pics here and there of non krinked and krinked Wenger SI blades. The SI's I checked out at Gander Mountain a couple of years ago all had krinked blades. I believe that all the 93mm Vic Alox blades are krinked including the Solo.That would be something very interesting if that was the case.
-
I know that the current run of coloured Alox Solos the Felinevet has in stock definitely are NOT crinked, because I checked the boxes before I posted them out. It seems that some Solos are and some are not, every other Alox knife I have seen has a crinked/ asymmetric blade.
-
@APS said:
I've seen pics here and there of non krinked and krinked Wenger SI blades. The SI's I checked out at Gander Mountain a couple of years ago all had krinked blades. I believe that all the 93mm Vic Alox blades are krinked including the Solo.No the solo is straight. I found this out by trying to put a solo blade accidentally on a pioneer, it doesnt fit since it isnt bent. Or if it is, bent much less.
-
I've had quite a few different Solos over the years. <u>Some</u> are straight, some are crinked.
Most of the time it doesn't matter of course. Except when you need to put together a SAK with no tool opposite the main blade and then a straight blade looks nicer. You then have to be very careful buying the mod fodder for the project :-\
-
A pic says more than 1000 words... ;)
All my Solo's have a non krinked blade. I don't believe on krinked Solo's before I don't see one
:D
-
@victor7000 said:
A pic says more than 1000 words... ;)
All my Solo's have a non krinked blade. I don't believe on krinked Solo's before I don't see one
:DOK if no one beats me to it I'll try to dig through solos and find a crinked one for you... ha ha..
I really want some one to show me a non-crinked SI.
-
Don't forget about the Woodsman, either. AFAIK, Solos and Woodmans are the only ones that can (and do) come with a non-krinked blade, but even these sometimes get the standard krinked blade. I have two of each - old red cross and new style cross:
- Old red Solo: krinked
- Old red Woodman: straight
- New cross, black Solo: straight
- New cross, gray Woodsman: krinked
-
A pic says more than 1000 words... ;)
All my Solo's have a non krinked blade. I don't believe on krinked Solo's before I don't see one
:DOK if no one beats me to it I'll try to dig through solos and find a crinked one for you... ha ha..
I really want some one to show me a non-crinked SI.
Well if the solo was krinked it wouldnt be as krinked as a pioneer since the blade extends OVER top of the center liner. In a solo this is impossible since there is no liner and the blade would be touching the scale.
-
@victor7000 said:
A pic says more than 1000 words... ;)
All my Solo's have a non krinked blade.** I don't believe on krinked Solo's before I don't see one**
:DSomeone sort a picture out before he starts eating food off the floor because he can't see the bugs on it ;) :P
We don't want that on our conscience :D
I've no Solos in at the moment so can't assist.
-
A pic says more than 1000 words... ;)
All my Solo's have a non krinked blade.** I don't believe on krinked Solo's before I don't see one**
:DSomeone sort a picture out before he starts eating food off the floor because he can't see the bugs on it ;) :P
We don't want that on our conscience :D
I've no Solos in at the moment so can't assist.

-
OH Oh... I can't close the debate yet. Here is a photo of some recent Solos and a Settler for comparison. What I noticed so far is that even though these solos don't appear to have a severe crink like the settler, the profile of the grind is not semetrical look and the taper on the top vs. the bottom of the blades in this photo. This may have confused me as possible manufacturing tolerences might be such that the tip does not always meet dead center which is more of what I looked for in the past.
Using the Settler for comparison, if the Solo did have the crinked blade on the one side it would run right against the scale.
I'm now currious if they have made Solo blades that have a more semetrical taper, use the standard crinked blade, or just maufacturing tolerences are at play in my previous observations.
I'm still going to dig more when I have time.

-
Here is a shot that demonstrates either a change in the symmetry of the grind or a manufacturing tolerance. [updated image to slightly clearer one]

-
@ICanFixThat said:
Here is a shot that demonstrates either a change in the symmetry of the grind or a manufacturing tolerance.Yep I've seen variations too, but not quite that much.
I've gone through about 30-40 solos in the last few months and all were non krinked, but I wouldn't call them symmetrical. I was starting to think they just use the blades from other knives that fail that tolerance test, so no tool could go along with them in the same layer. Nothing wrong with that, that's what Id do to, since the blades for solos will still work and have a wide range of tolerances that way.
-
Crinking is not exactly bending of the blade but grinding it on one side during production so that a mating usually small blade will fit into the same slot, these two baldes pivoting on opposite ends of the knife.
-
I would like to see a pic of a non-krinked SI.
Its hard for me to imagine how a non-krinked blade wouldn't hit the awl.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login