Multitool TLC
-
I haven't tried RemOil..
I try to stay away from any oils in my multi-tools as they attract gunk.. I use dry film lubricants like Tuf Glide. Tuf glide is waterproof, it doesn't attract gunk, and it lasts a LONG time! Not to mention that it basically seals the steels pores so it makes it have a much better rust resistant finish. I would never use anything else! -
@Leatherman123 said:
I haven't tried RemOil..
I try to stay away from any oils in my multi-tools as they attract gunk.. I use dry film lubricants like Tuf Glide. Tuf glide is waterproof, it doesn't attract gunk, and it lasts a LONG time! Not to mention that it basically seals the steels pores so it makes it have a much better rust resistant finish. I would never use anything else!YAY Tuf Glide user!!!
I bought a little tuf glide kits for my edc bag...good stuff!
-
-
Here's the kit I have: http://www.denverdiscoun[url=http://forum.multitool.org]multitool[/url].com/KNIVES/KNIVES---ACCESSORIES/MOSS91200.html
An excellent price indeed!

-
I am sold on using an ultrasonic cleaner for the chore at hand. I recently sold my old ultrasonic cleaner and just ordered a new one that appears to have a big enough s/s tank for a MT or knife with out dis-assembly 2.5 Liter Ultrasonic Cleaner. This model was recently on sale for $72 with FREE shipping and a $10 gift card, so I ordered one. The previous one that I owned I had to disassemble the item to be cleaned and put the pieces in the small tank, which was not always possible because the size of the parts would not fit in the tank. With the new one I believe I will be able to do riveted models and others that can not be taken apart in the s/s tank. Once I test the new model there will be a detailed post here, the unit should be here next week, I hope as I have a couple used SOG Toolclips and other MT's as well as some knives and other metal parts to clean.
-
@Leatherman123 said:
Here's the kit I have: http://www.denverdiscoun[url=http://forum.multitool.org]multitool[/url].com/KNIVES/KNIVES---ACCESSORIES/MOSS91200.htmlAn excellent price indeed!

That's the one I have

Great lil item!
-
I have been using similar methods. Mostly nylon brushes,and compressed air. The only thing I do that I have not yet read about is Contact cleaner. The kind used in electrical trades. Designed to dissolve dust and grime. Evaporates very quickly. End with light machine oil applied with pinpoint applicator. I have been wondering how to remove small scratches. Great thread!
-
@eodtech said:
I am sold on using an ultrasonic cleaner for the chore at hand. I recently sold my old ultrasonic cleaner and just ordered a new one that appears to have a big enough s/s tank for a MT or knife with out dis-assembly 2.5 Liter Ultrasonic Cleaner. This model was recently on sale for $72 with FREE shipping and a $10 gift card, so I ordered one. The previous one that I owned I had to disassemble the item to be cleaned and put the pieces in the small tank, which was not always possible because the size of the parts would not fit in the tank. With the new one I believe I will be able to do riveted models and others that can not be taken apart in the s/s tank. Once I test the new model there will be a detailed post here, the unit should be here next week, I hope as I have a couple used SOG Toolclips and other MT's as well as some knives and other metal parts to clean.Whatever came of this? Does the cleaner work well for multi's without dissasembling them?
-
Here's the kit I have: http://www.denverdiscoun[url=http://forum.multitool.org]multitool[/url].com/KNIVES/KNIVES---ACCESSORIES/MOSS91200.html
An excellent price indeed!

That's the one I have

Great lil item!
Incredible what the can do these days.

-JS
-
After washing I usually put some tin foil down in my toaster oven, set it to 100f and let it bake for about 10 mins. That dries up all counts of water.
A little mineral oil or olive olive for food safe lube and away I go. If its a BO tool (likely it is) I take a paper towel with some olive oil and wipe it on and with another cloth or paper towel wipe most of it off. It give it back it's semi sheen, for BO that is.
If I doing a full tear down or reassembly from a mod, I actually lightly coat or dab some petroleum Vaseline on the pivots. Tends to stay put and doesn't need much.
-
I have found that Bar Keepers Friend works wonders... it gets rid of rust, grime, sap, mystery "gunk", etc. I have used it on a couple **filthy **Leathermans that I got on ebay, and BKF got them looking like new in no time.
http://www.barkeepersfriend.com/
I use the powdered version with a damp sponge, then towel the tool off when I'm done. I let it air dry for a bit, then hit it with some 3-in-1 or WD-40.
-
It depends on how used or gunky the tool is. For new tools, skip to the second-to-last paragraph.
For gunk, rust, blood, etc. I use boiling water in a pan with a drop of dishwashing liquid. I just leave the tool in there for about 60 seconds. Then I use a toothbrush, toothpicks, dental floss, and lots of elbow grease to remove whatever is in there. Sometimes I'll need to use the bronze bristle brush on a Dremel. Everything is then dried with a hair dryer and then the pivots are lubricated. My choice for lubrication is half Tuff Glide, half 3-in-1, in the Tuff Glide's needlepoint bottle. Work the pivots a few times. Then the tools get resharpened and whatever other maintenance is needed. The most common is a broken flathead screwdriver, which can be turned into a pry bar or reamer easily. If the tip of one of the needlenose pliers is broken off, the other one can be filed flush with it to make stubby pliers. I sharpen my multitool blades to the point where they'll cleanly slice thin (receipt) paper.
Most of my multitools are Leathermans, and I absolutely hate their bead blast finish. In humid environments, mine rust up just by carrying them; don't even have to take the tool out. So, I use a bronze wire wheel attached to a Dremel and remove the finish, then a small cotton wheel loaded with polishing compound. A final finish with 0000-grit steel wool produces a nice satin finish. I have to get every spot of every tool, and as deep into the pivots as I can. A Blast takes me about an hour.
Sheaths require care as well. Most of mine are nylon, and it's as simple as repairing any worn-out Velcro, reattaching belt loops, and using a lighter for frayed parts. Sometimes, the sheath just needs to be thrown out. New ones are typically $6.
Once the tools are up to par, it's a matter of keeping them sharp and lubricated. For sharpening, I use a leather strop and then a glossy magazine cover. If it's really dull, I use a white ceramic rod. Dog bone sharpener (looks like a triangle) for serrations. If I'm going around water or it's humid outside, I'll rub each tool down with a Rem Oil cloth, otherwise, I keep everything but the pivots dry.
-
Had a Radio Shack edition get lost outside... found it months later after the snow melted. Buried 1/2 way in some mud!
Washed it in the kitchen sink and lubed it. No rust or discoloring. It was the only time in nearly 10 years I ever added anything -otherwise dry. Still a usable pc until I had it exchanged under warranty.
I would still wash it on occasion. Never tried floss but that is a clever idea. Toothpicks were handy. After washing would open it up and let air dry.
-
I was a bit neglectful recently with my SwissTool..I didcovered the results of said neglect at Work..I ended up dipping a Bandanna in to some Diesel and wiping down the Crud..Worked pretty well as it has a few times when I still ran out over the road as a Driver..It even left my tool with the Manly Scent of Deisel! LOL
-
Personally I swear by ballistol (a rather good oil) on edc items once every couple months. other items once when it looks like they need it. its the duct tape of oils imho (plus you could probably drink it its that food safe) another upside is it eats rust!
-
@TheAverageJoe said:
Personally I swear by ballistol (a rather good oil) on edc items once every couple months. other items once when it looks like they need it. its the duct tape of oils imho (plus you could probably drink it its that food safe) another upside is it eats rust!was not familiar with this product, it does look safe, but the warning is sort of odd
Ballistol does not contain ingredients considered hazardous by the FDA. It does not contain any ingredients which may be harmful for warm-blooded organisms, reptiles or aquatic organisms (if used as directed). If swallowed, DO NOT INDUCE VOMITING, ASPIRATION CAN OCCUR. CONSULT A PHYSICIAN IMMEDIATELY.
if it is so safe, why do I need to contact a physician?
-
Personally I swear by ballistol (a rather good oil) on edc items once every couple months. other items once when it looks like they need it. its the duct tape of oils imho (plus you could probably drink it its that food safe) another upside is it eats rust!
was not familiar with this product, it does look safe, but the warning is sort of odd
Ballistol does not contain ingredients considered hazardous by the FDA. It does not contain any ingredients which may be harmful for warm-blooded organisms, reptiles or aquatic organisms (if used as directed). If swallowed, DO NOT INDUCE VOMITING, ASPIRATION CAN OCCUR. CONSULT A PHYSICIAN IMMEDIATELY.
if it is so safe, why do I need to contact a physician?
simple aspiration can occur, oil in the lungs is not good at all.
-
Personally I swear by ballistol (a rather good oil) on edc items once every couple months. other items once when it looks like they need it. its the duct tape of oils imho (plus you could probably drink it its that food safe) another upside is it eats rust!
was not familiar with this product, it does look safe, but the warning is sort of odd
Ballistol does not contain ingredients considered hazardous by the FDA. It does not contain any ingredients which may be harmful for warm-blooded organisms, reptiles or aquatic organisms (if used as directed). If swallowed, DO NOT INDUCE VOMITING, ASPIRATION CAN OCCUR. CONSULT A PHYSICIAN IMMEDIATELY.
if it is so safe, why do I need to contact a physician?
simple aspiration can occur, oil in the lungs is not good at all.
that makes sense, I guess I did not read it well enough (plus I was 3 hours past my bed time)
-
@knife-man said:
OK so I admit it .. they go ion the bath me once a month .. whether they (or I ) need's it or not ::).TMI.
-
Personally I swear by ballistol (a rather good oil) on edc items once every couple months. other items once when it looks like they need it. its the duct tape of oils imho (plus you could probably drink it its that food safe) another upside is it eats rust!
was not familiar with this product, it does look safe, but the warning is sort of odd
Ballistol does not contain ingredients considered hazardous by the FDA. It does not contain any ingredients which may be harmful for warm-blooded organisms, reptiles or aquatic organisms (if used as directed). If swallowed, DO NOT INDUCE VOMITING, ASPIRATION CAN OCCUR. CONSULT A PHYSICIAN IMMEDIATELY.
if it is so safe, why do I need to contact a physician?
Balistol has mineral spirits as an ingredient, fairly safe for external use, not good for internal use.
It's one of my favorites for use with my "wood & steel" guns. It is safe for most finishes and handy for treating and removing rust. That said, it's okay for a protective oil. It can be washed off, but pretty durable otherwise.
I've been tempted to run my LMs through the dishwasher, after a citrus degreaser. But usually, I rinse them in clean water and apply a good gun lube to the pivots. Then work the lube into the pivot, wiping the dirt/rust/grime away as it works out of the pivot joint.
This usually works well for several months, but I try to do this every 3 to 4 months. It's a habit I got into being in a trade that uses hand tools all the time.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login