Scissor test
-
Got your Wingman in the mail yesterday. Haven't run as detailed tests as you did, but it cut fairly well on what I tried; I did notice that the pivot on the Wingman scissors is loose even by Leatherman standards (see my previous post about LM QC). The scissor build and geometry remind me of the old skool Wave scissors just a bit, and my old Wave cuts noticeably better than the WIngman. I'm tempted to try tapping it tighter with a nail set, and re-trying some of your tests.
-
Feel free to post your findings in this thread if you do. I thought the Wingman Scissors were decent, and only got rid of it because it's not a great OHO for a lefty.
-
Amici,
Has anyone had any negative experiences with the scissors found on the Juice models? So far I can honestly report no, but I cannot say that for some of their other models.Cheers,
Serge -
@sergemaster said:
Amici,
Has anyone had any negative experiences with the scissors found on the Juice models?I've got one of each of the Juice models. (Yeah, I know, twelve steps and all that.) Even though I've been beating up on Leatherman's scissor QC lately, I've never had a problem with the scissors on the Juice models I have. Maybe I just got lucky, but they all cut very well.
-
@sergemaster said:
Amici,
Has anyone had any negative experiences with the scissors found on the Juice models? So far I can honestly report no, but I cannot say that for some of their other models.Cheers,
SergeYes! Floppy dscissors, half arsed grinds and difficulty stowing as they fouled on the liners. I'm not a fan of the Juice line, and the scissors are merely a part of that equation. I actually prefer the scissors on the Wave to those on a Juice ... but give me Victorinox or Wenger any day, although I'll settle for Gerber's too if I haven't got a swiss option to hand.
As always YMMV
-
Adding the Juice S2 Scissor test...
Fair disclaimer: This tool is used. I don't know how used, but it's looks to be in good shape. But, just so we're clear, it wasn't NIB.
Failed: Heavy Plastic
Barely Adequate: Corrugated Cardboard, Khaki, 550
Pass: Non-Corrugated Cardboard, Leather, PETE, T-Shirt
Pass with Distinction: PaperIf I use this tool left-handed, then it fairs much worse, Failing Leather and 550 and barely adequate for T-Shirt.
Final score:
Right-Handed: 5
Left-handed: 2This is the only tool I've seen this kind of major difference in from right to left hand. Very odd.
-
@Lynn LeFey said:
This is the only tool I've seen this kind of major difference in from right to left hand. Very odd.Sounds like the pivot is loose.
When you press down on the "lever," you usually also press a bit sideways. Most scissors are built for righties, who tend to press leftwards; that in turn levers the edge against the other edge, which makes for a more efficient cut. Lefthanded, though, you tend to press it rightward, which levers the edge away from the other edge, causing the scissors to bind up rather than cut cleanly.
-
@Mercury said:
Unfortunately, I must agree with Leatherman's consistency. While they have awesome designs, I have had several tools with terrible scissors on them, while others have the same model scissors and they rock.The scissors on the S.A.N prove to be useless after a few cuts,I dont get it? ??? ???
-JS
-
Unfortunately, I must agree with Leatherman's consistency. While they have awesome designs, I have had several tools with terrible scissors on them, while others have the same model scissors and they rock.
The scissors on the S.A.N prove to be useless after a few cuts,I dont get it? ??? ???
-JS
Are you talking about Swiss Army Knives?
If so, I disagree, I have had a ton of SAK's and NONE of them had any scissor issues. In fact, SAK scissors tend to be the best ones around.
-
Another pair of scissors enter the fray.
Scissor test on the Victorinox Spirit X (brand new out of the box)
Failed: Nothing
Barely Adequate: Heavy Plastic, Corrugated Cardboard
Pass: Non-corrugated Cardboard, Paper
Pass with Distinction: Khaki, 550, Leather, PETE, T-Shirt
I got a 'push cut', meaning I was able to push the scissors through the material without having to work the jaws, on PETE, Leather, and T-Shirt. These scissors were also able to cut through their chosen material even at the very tips of the scissor blades. I think both of these features are due to the curved angle on the scissor blades, making it so the angle of cut is about the same, whether at the back or front of the scissor. These might also have been the best scissors versus 550 I've ever tested.
On a slightly ironic note, their short blades make them only average at common tasks like cutting paper. This shows a bit of a flaw I've already mentioned in my test scoring. While they will cut right through Corrugated cardboard and heavy plastic, the higher force required starts to speak to the tool's lack of leverage, and problems in ergonomics in dealing with heavy material. That's just a function that you will see in all fold-out scissors, IMO.
These scissors are dead on-par with my Wave's numerically, but they really should get special consideration for the awesome push-cut ability demonstrated.
Final Score: +12
-
My test on the scissors for the Multitool that comes with Gerber Bear Grylls Ultimate Survival Pack... Are we calling it the Bear Grylls Strata? Anyway...
Failed: Nothing
Barely Adequate: Heavy Plastic, corrugated cardboard
Pass:550, Leather, PETE, non- corrugated cardboard
Pass With Distinction: Khaki, T-shirt, paperTotal Score: 10
Generally a good pair of scissors, which I expect from Gerber, but the small thumb stud used to press the scissors closed makes cutting heavy material painful. I was also a little surprised at how bad it was at cutting 550, considering how well it did with even multiple layers of khaki.
-
cheers for the tests Lynn.

-
C'mon... you guys just KNOW as soon as a new tool falls into my hands, I'm gonna want to test the scissors and can opener. Well... it's Friday, and we're having dinner over at our friend's house, so no can opening today (but I WILL be testing the cap lifter later :D)
Anyway, the Wenger EVO S17 has scissors, and this is how I rate them...
Failed nothing.
Barely adequate on Heavy Plastic and Corrugated Cardboard
Pass with distinction on T-Shirt, Suede Leather, Cardboard, and PETE
Pass everything else.+11
Very good scissors overall. Cutting heavy material like corrugated cardboard and heavy plastic was a bit painful, and the 550 was a lot harder to cut with this than I thought it should be, but otherwise no problems.
And to make it easier for comparison, here's what the totals look like to date, in order of worst to best. In the event of ties, there's no sorting. Anything ranked +12 tested just as well as anything else ranked +12.
Sheffield swiss army rip-off -3
SOG Powerlock +0
Sheffield 12010 +1
Vic Classic +5
Juice S2 (used) +5
Wingman +6
Vic 91mm Scissors (used) +7
Crosscut (used) +8
Squirt S4 +10
Wenger 85mm +11
Wave +12
MP400 +12
Crosscut 2.0 +12
Spirit X +12I'll add more as new tools come across my plate.
-
They should at least get another point for being self sharpening. They'll never go dull.

-
I'm not exactly sure how I missed this review earlier. I have 2 Micras, and have never tested them. In addition to them, I retested the SOG Crosscut I have against them, to get a very close comparison. One of the Micras is used, and one is more-or-less new.
While the cutting performance on the new Micra actually (to my surprise) beat the Crosscut, I pinched myself twice on the handles of the Micras. No knocks on points for cutting, but not awesome. I must now grudgingly admit that Micra is the best scissors in the land.
Neither failed anything.
Old Micra is barely adequate for T-Shirt, Khaki, Suede, 550
New Micra passed with distinction on T-Shirt, 550
Both passed with distinction with Paper, PETE, Cardboard, Heavy PlasticFinal Scores
Old: +9
New: +15So the rankings of all tested scissors to date stand as follows...
Sheffield swiss army rip-off -3
SOG Powerlock +0
Sheffield 12010 +1
Vic Classic +5
Juice S2 (used) +5
Wingman +6
Vic 91mm Scissors (used) +7
Crosscut (used) +8
Micra (used) +9
Squirt S4 +10
Wenger 85mm +11
Wave +12
MP400 +12
Crosscut 2.0 +12
Spirit X +12
Micra (new) +15 -
I keep telling people here how great micra scissors are but they never listen...
As said, they get a bit worst with age. My usa stamped ones,older, need to be tightened.
-
@dks said:
I keep telling people here how great micra scissors are but they never listen...I've known the Micra scissors were good for quite some time, however, I carried a Crosscut for a very long time. At one point, I lost them, and the only tool available for me to replace them with was a Micra. I then carried it for a few months until I found the Crosscut again. I tested them side-by-side, and the Crosscut was decidedly better. That was 12 or so years ago.
Fast forward to yesterday, when I have the new Crosscut 2.0 and a new Micra. This time, Micra wins, pretty handily. The thing is, I've had 5 Micras in my life, and they were ALL really good. I've had 2 Crosscuts; the old, which was outstanding, and the new... which is less outstanding. It might be this specific tool, or the entire line, but every Micra I've owned has been consistent.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:D :D :D