Car boot finds
-
I have been playing with these chisels :D

I decided to try something different from the wire brush this time, they went straight in to the vinegar (not the handles ;) )
Cleaned the black off with a rag then a green scourer,
Started to polish the top one with some brass polish and rubbed down with linseed oilWhat I thought was a 'Marples' is actually a 'Jewson's chisel :o
(I went a bit wrong with the Primary grind on this one :-[ )
Just need polish the other two and sharpen :D

I'm really glad I bought the 'Footprint' chisels now (I nearly didn't bother as they were so tatty)

-
Tony they came up great mate 8) 8)
-
Thanks Guys
I think vinegar is the way to go, no dust, no noise of the wire wheel, no ouch my eye :ahhh
Just pop them in a jar of cheap vinegar overnight, wash the black stuff off in the kitchen sink in the morning an Bobs your uncle :DThe only thing to remember is they have this gray patina instead of a shiny finish
If my spork polisher had not died I think I would see what they looked like after a good polish
PS, If you do buy rusty wood chisels, pitting on the front or cutting edge is fine as we can sharpen it out but pitting on the back pretty much ruins the chisel (or makes a huge amount of work)

-
@sparky415 said:
Thanks Guys
I think vinegar is the way to go, no dust, no noise of the wire wheel, no ouch my eye :ahhh

cant you just grind a bit off the back and sharpen them into a staggered vee?
-
Good work that man - more tools rescued from oblivion

-
I almost forgot about this little chap
Hes been in the vinegar for about 30 hours (that will bugger the wood worm >:D ) and might go back in tonight

-
I'm renaming you Tony de Oxide, the Rust Master TM. Has a ring to it don't you think :P
Nice haul gents.
I did three boot sales this last weekend. Keeps me fit ;)
Spotted a Victorinox Hunter but the guy wanted too much for it. Didn't buy an pretty cool axe head that I'm now regretting walking away from ::)
Got a pile of old broken mobiles for a couple of quid that I'm now playing gut swaps with to get a few working. I bought the boys an old Intel microscope but its around a decade old and the drivers are a joke. Its a neat bit of hardware for kids though, so I'll probably gut the electronics and replace them with the board from a modern web cam.
Oh and I found a Vic. Ensign :D
-
@Neil said:
I'm renaming you Tony de Oxide, the Rust Master TM. Has a ring to it don't you think :PNice haul gents.
I did three boot sales this last weekend. Keeps me fit ;)
Spotted a Victorinox Hunter but the guy wanted too much for it. Didn't buy an pretty cool axe head that I'm now regretting walking away from ::)
Got a pile of old broken mobiles for a couple of quid that I'm now playing gut swaps with to get a few working. I bought the boys an old Intel microscope but its around a decade old and the drivers are a joke. Its a neat bit of hardware for kids though, so I'll probably gut the electronics and replace them with the board from a modern web cam.
Oh and I found a Vic. Ensign :D
Go back for itRust master
…. sounds better than the dust mester 
Sound like you've been busy Mate
There's a big one here at the weekend, I'm collecting all my change together :D<u>By the way
If anyone coming to the meet finds a small ( 3 or 4inch no bigger ) engineers square I would be very grateful
I decided I really need one it will help with my chisel sharpening</u> ::)
.
-
If he's there this weekend I will :)
I've got an engineer's square you can have Tony. Just remind me to bring it nearer the date

-
Well actually... PM incoming ;)
-
I've been enjoying your treasure hunts from afar gentlemen.
Wish I could get out more myself, but since I can't, this thread is the next best thing. :) -
Thanks Bob....Want to buy some
rustGenuine English Antiques? >:D
-
@sparky415 said:
Thanks Bob....Want to buy somerustGenuine English Antiques? >:D

Sorry can't help myself... Evrytime I see him...

Only fools and horses RULES!! Have all seasons on my PC!!!

-
:D

-

After a couple of days sitting in the vinegar it was washed off in the sink with some cream cleaner

After just one hour new rust started to appear :ahhh

More lettering has become visible E IN ENGLAND
And on the other side BRA 1 ½
So I'm guessing Brades :DYou can see the line where the blade was hardened (hamon?) and the dark flecks are maroon paint

I added the handle I received from Neil at last years meet, it looks a bit thick for the Ax but will see if it grows on me



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


