The Black Tide (Ultimate BO Wave)
-
Thanks everyone! Hahah
Maybe the LM engs keep an eye on us more than we think.
I am still trying to decide what to do.
Make a giant awl from the saw, grind off the thumb pad and move it to the otherside of the hand so to put in a second bit drivers and call it quits.
Like my tsunami project :


OR carry a pair of BO slip-n-Snips to replace the scissors, keep the awl, add a second driver and keep the saw.

OR
Lose the can/bottle opener, move the awl in its place, keep the modded scissors and add another bit driver.
I don't saw awl that much nor do I open bottles.
-
@Metropolicity said:
ORLose the can/bottle opener, move the awl in its place, keep the modded scissors and add another bit driver.
This would be the option I'd choose.
-
Alright, I've settled on this Black Tide load out for now. I am constantly switching back and forth between a Robbie bit, Phillips and a flat bit. So I installed a second BO driver, and took another stab at installing the awl from the Rebar.
I know, you are thinking...'Where are those scissors?'. As much as I like to have scissors on the Black Tide, it was more of a proof of concept and in conjunction with the final grinding off of the thumb pad, it became much more difficult to use them. So, like the settling of the dual ALX style bit driver, I am carrying a sweet set of BO Slip-and-Snips. Been looking for an excuse to carry them anyways.
Here you can see the dual bit drivers...
The second bit driver would be a breeze to install if I kept the flat head or the DIY awl that I made...but no...it had to be difficult. The awl from the Rebar is JUST so slightly thicker than the flat bit driver AND the sharpened end was a bit too thick and would interfere with the spring locks, so a little grinding of the sharpened end exposed some metal but maintained its awl-some awl-ness.
With the awl squared away, the bit driver was jamming with the awl's increased thickness. So a little grinding the mating surface to expose some steel, polish to 600 grit and it fits. I used two washers between the bit driver and the awl to increase the distance they are touching each other. They now slide out like factory.
The other handle's tools remained. Until I figure out what I want to replace the can opener with, i'll keep it there. I may sharpen it to open packages.
I had made an extra Skinth VS so I decided to tool up during the last weeks of the move since I'll be taking apart and fixing things around this damn place.
The ancillary Skinth VS is on the left. It has all the other stuff that I wouldn't need on a regular basis, just around the house these days. So I still grab my main Skinth VS with the Black Tide, Space Pen and my PMP pry bar to leave the house. Both have identical clips, but I added a H&K clip to the front of my main Skinth VS because sometimes I clip my keys to it.
And a pic of the load out...you can see I have an affinity for black oxide.
So for now, the Black Tide configuration will have to do. Now that I have an awl in place, I'll see how much I use the saw in the coming weeks or else it'll get the axe in favor of OOOHO BO scissor.
-
Congratulations on doing what Leatherman hasn't done, yet... if ever. Well, you have proven it can be done, now it is a waiting game to see how many years later that it catches Leatherman's interest.
Personally. can live without the scissors, though they do come in handy. The small bit driver is rarely every used. That flathead is a waste, have an ST300 awl in there for the past year; Why carry two tools when one will suffice?
If money wasn't an option, and had more time/room & tools (jig), would experiment with another version. Perhaps making scissors that fit the large bit driver, and doing the over and under idea Tracy Ramsey suggested - just pull the small bit driver out when <u>not</u> needed.
An awl is a near dire need for me. One that can sew even more valuable that a pair of scissors or small bit driver.Think Leatherman tries to put too much stuff on-board to make it easy for most anyone to access (without needing to think). MTO is definitely <u>not</u> part of the herd, which is why I like it here!
Per the flathead: If Leatherman wants a prybar and scraper they could make a complimentary tool for that. But there there's that lifetime warranty issue and that other companies are making them - so they won't.
-
@Xelkos said:
Congratulations on doing what Leatherman hasn't done, yet... if ever. Well, you have proven it can be done, now it is a waiting game to see how many years later that it catches Leatherman's interest.If money wasn't an option, and had more time/room & tools (jig), would experiment with another version. Perhaps making scissors that fit the large bit driver, and doing the over and under idea Tracy Ramsey suggested - just pull the small bit driver out when <u>not</u> needed.
An awl is a near dire need for me. One that can sew even more valuable that a pair of scissors or small bit driver.
I'll see if I can stand using a LM Style, the mini scissors are nice to have but not necessary.
I posted this thread on the LM Facebook page, so I am sure they heard/saw, and so did you!
I just used the newly minted Robbie bit to take out some screws in the wall and tighten up a drawer set before wrapping it up.
I've often thought about making an awl from one of the spare bits from my MUT but having to replace the bit and everything would slow me down frankly.
I am sure leatherman will be releasing some kind of Charge ALX type tool with the bit drivers, flat bit and can opener, those tools seem to drop in with no problem whatsoever.
-
-
Had a bit of time today...procrastinating.
I took an older style small bit driver from a broken TTi and saw the potential. The newer versions don't have enough material to support this.
A little grinding, shaping and down to a 600 wet sand, we have the little driver driver.
Fits inside the bit adaptor..and the storage up top for the bit works like intended.
Slips inside the bit driver on the Black Tide nicely.
It even folds ups and nests, and closes up too!
As a bonus...the extender makes it a nice little precision one for ACTUALLY fixing glasses:
-
When is Leatherman going to hire you?
-
@MedusaOblongata said:
When is Leatherman going to hire you?They don't need to.. I'm sure they'll get the exact same ideas all by themself at some point..

-
But we all saw it here first. Pretty sure I am the first to combine the rebar head onto a wave.
My next grail will be a modded Ti with rebar head etc etc

-
-
-
I am going to build one myself a little different. Thanks for the tutorial

-
@tattoosteve99 said:
I am going to build one myself a little different. Thanks for the tutorial
Someone had to do it!
I am very very happy with mine, the dual bit drivers have already come into use with this stupid rental house, the renovator was an idiot. Wood screws everywhere...drywall screws in wrong places...yikes!
-
Well mine will have an awl instead of a can opener. May replace the scissors I don't use them much anyway.
-
@tattoosteve99 said:
Well mine will have an awl instead of a can opener. May replace the scissors I don't use them much anyway.You didn't look carefully :). There IS an awl. You'll have to grind away some of the cutting edge of the awl to fit. It's thicker than the flat bit driver. The second bit driver had to be shaved down a bit too.
-
Wow! Lots of coolness going on in this thread. That mini driver adaptation is genius and your reports read like a romance novel for MT modders.
-
Sorry I'm a little late to this party Eric, but kudos to you for some fine mod work!
And while I enjoyed the Black Tide tutorial immensely, I thought this was pure genius: 
@Metropolicity said:
Had a bit of time today...procrastinating.I took an older style small bit driver from a broken TTi and saw the potential. The newer versions don't have enough material to support this.
A little grinding, shaping and down to a 600 wet sand, we have the little driver driver.
Fits inside the bit adaptor..and the storage up top for the bit works like intended.
Slips inside the bit driver on the Black Tide nicely.
It even folds ups and nests, and closes up too!
As a bonus...the extender makes it a nice little precision one for ACTUALLY fixing glasses:
-
@J-sews said:
Sorry I'm a little late to this party Eric, but kudos to you for some fine mod work!
And while I enjoyed the Black Tide tutorial immensely, I thought this was pure genius: 
Thanks Bob, as always, nice to get a professionals approval

I have been putting the Black Tide through it's paces in the last week, fixing up things in this 100 year old rental we are leaving in a few weeks time. Can't wait to get out of this crap for bricks house.
-
Those mini bit drivers look like the ones you sent me 3 of along with the large one. I like using the bit for SAK corkscrew drivers but I have no use for the holder if you'd like them back since you've figured out an awesome mod for them. Otherwise I'll just sell them to someone else that wants to try it or they'll rust away in my parts bin.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login