Gerber Fan Club.
-
This MP400 Fisherman was delivered today. I`ve been on the hunt for one of these for a while. :)
-
I know I've said it before, but if Gerber put that tool selection on with a standard head, it'd be very close to being my ideal Gerber.

-
Seriously though, I still love it that Gerber will do so many little changes/options on one tool. Now, if only they still did the "build your own" service.
« Last Edit: 09 May 2012, 13:58:10 by Gareth »Build your own Gerber? Sounds cool to me.
:D add a flamethrower? just a small one of course.

Beth
-
I emailed Gerber and asked if they could assist me in finding this model. They said it is not produced and at one time they custom built tools but no longer do. So I went ahead and tool the carbide cutters off another tool and added them to my proscout, now that is the most useful gerber I know of! although the diesel is a great tool also. I like gerbers but I really like their blunt tools.
-
Just started to get into Gerber's. MP400 and D.E.T. Are the two new additons.
-
Love those pics of the Pro Scout with the blunt nose carbide pliers head. I put a needle nose with carbide cutters on mine and love it. After fitting some sabre saw blades to it, it's incredibly handy. I may have to get a skinth xl for it in the near future.
Bob -
These pics have already appeared in the mod squad section but I thought they'd fit nicely here as well. My modified MP400 (now known as the MP475 ;)).

Dropped the knife blade to make room for the file and dropped the can opener in favour of the awl. Now the awl is a tool Gerber should really offer on more MT's, it's a very handy tool. :)
Also did a little blade swap on my MP450 as I never really warmed to the Wharncliffe blade shape.

My Gerber's have really pushed a lot of my other MT's to the back of the drawer, the sliding pliers and tool selection just work very well for me ATM. :)
-
I like that mod Gareth.
8) :) -
Looks really good Gareth

-
I like that tool loadout, Gareth.
The blade swap is nice too. The 450 is probably my favorite multi, but I'm not crazy about that blade. -
My latest Gerber showed up today, courtesy of nelly1974. It could very well be my oldest too, not sure if it's older than my Mr. Pinchy or not.
Anyway, the MPT :


Very neat tool. Non-locking and the drivers are a bit stubby, but very cool nonetheless. And the awl kicks ass!

I especially like the rounded edges to the hollow part of the handles, makes it much more comfortable to use than a PST. This sucker is in great shape, and a very neat bit of kit.

-
I like the MPT- it is an important piece of multitool evolution and scored a lot of points for the folks at Gerber. It's very similar in design to the PST but solves a couple of the PST problems- notably the uncomfortable handles, and it does it in a simple, elegant method.
While the overall tool is a bit gangly and awkward I think it's actually pretty cool in it's own way.
And yes, that is the King of Awls!
Def
-
Also, for those interested, the MP600ST has been out for a month now; SMKW and eBay both have them available; I've handled one and it's a nice feeling piece of kit, as is the Balance - good run for the Juice S2, IMO.
And yes, the Balance does feel like a bar of soap. ::)
-
@Grant Lamontagne said:
While the overall tool is a bit gangly and awkward I think it's actually pretty cool in it's own way.Gangly - THAT'S the word I was looking for! Thanks Def!
:) I was doing a bit of searching on the web, looks like the one I have is an earlier one - brushed finish, cutouts only on one side of the handle, no edge on the file, no bumps to slow down the opening of the pliers, the "shoulders" on the handles at the pliers pivot. That makes it a bit cooler IMO. I've been playing with it since I got it, and I do have to say I think it's neat in a slightly odd sort of way. 
-
Searched the web for multitool info?

We've got more MPT info than I think anyone else has right here on the Multitool.org Encyclopedia!
Just in case you happened to find any info we were missing, feel free to add it so the Encyclopedia is up to date for the next person that is looking for info!
Def
-
Mia Culpa. Where's the Hara Kiri smiley? In my defense, the encyclopedia was the first link to pop up on Google, and that's where my info came from. That and a bizarre thread involving Mike and Benner from '08.......Seems to be a lot of those floating around here..... :) -
Yes, there used to be a LOT of odd Benner/Mike threads.... I find I actually miss the two of them carrying on, but don't tell them that or they'll both get swollen heads!
As for the Encyclopedia, a friend of mine was asking me about a fly fishing tool last week. I was telling him about this discontinued model from Xikar and he sent me a link asking "Is this the one?" It was a link to the Encyclopedia! He sent me a link to my own site! :P
Def
-
11 of my Multi-Tools are Gerber (85%). I guess that makes me a fan

-
@DIYMultiTool said:
11 of my Multi-Tools are Gerber (85%). I guess that makes me a fan
good man.
I have to admit that though I am indeed a fan of all my Gerbers, I still own many more Leatherman's. :-[ -
@DIYMultiTool said:
11 of my Multi-Tools are Gerber (85%). I guess that makes me a fan
Which models do you have?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login