84mm mod help
-
Hey guys,
I'd like to try my hand at modding a cadet (first mod) to include a woodsaw and maybe some other tools.
Questions: Where do I get the donor woodsaw from, and what other tools are possible on the 84mm alox frame? Are any of the other 84mm cellidor tools doable in alox too, or is it like 91/93mm's where you can't really chop and change?
Cheers guys. I hope to be starting this in about a month, once I've moved house and got my man-shed up and running. I will keep the thread updated as I go along :D
edit: I've read the "mini farmer with scissors" sticky and that pretty much answers my questions. Learn to read

-
The nice part is standard 84mm parts fit on 84mm alox perfectly, the problem of course is finding them. 84mm scissors and saws are tough to find now. That was the one reason I was hacking 91mm scissors to fit on that smaller frame.
-
Yeah, I read about that with interest. What tool did you use to convert the 91mm scissors, a dremel?
-
@user24 said:
Yeah, I read about that with interest. What tool did you use to convert the 91mm scissors, a dremel?Just hand tools for shaping, I like using files of various shapes and going slow to shape. You dont get any steel tempering runing heat that way. A dremel would be faster but Im always afraid I'll overheat it. You need a carbide bit and drill press to put in a new hole though, no way around that.
-
Thanks. Ok, well I could have managed the reshaping but not the hole drilling. I'll stick with adding a saw, I think I have a source for a My First Vic Plus. I can add scissors later if I find them or buy the tools.
Are there any other 91/93mm tools that you know of that would be simple to add to an 84mm?
-
Not really- the pin sizes and spacing are different at the ends, so if you are thinking of mounting something like an inline phillips and a magnifier or a file, you'll have to drill. Which if you do your homework, you may be able to find a metal shop that can do it for you. You'll scream at the cost, but if you only need a few done...
The center pin used for the backside tools is the same, and they are the same length, but the tricky part is the thickness, but IIRC the Cadet/Recruit/Bantam backsprings and liners don't even have the hole so you'd be looking at switching to a Tinker Small, Tourist or Sportsman.
With needle files, you could make a plus scales.
-
I'd like to try my hand at modding a cadet (first mod) to include a woodsaw and maybe some other tools.
Questions: Where do I get the donor woodsaw from, and what other tools are possible on the 84mm alox frame? Are any of the other 84mm cellidor tools doable in alox too, or is it like 91/93mm's where you can't really chop and change?
Cheers guys. I hope to be starting this in about a month, once I've moved house and got my man-shed up and running. I will keep the thread updated as I go along :D
edit: I've read the "mini farmer with scissors" sticky and that pretty much answers my questions. Learn to read :twak:
For the 84mm Wood saw try getting a My First Victorinox Plus model.
-
Thanks guys :D
My plan at the moment is to get a tinker small and a MFV+ and create this config:
-
alox scale
-
main blade, small blade
-
woodsaw
-
openers
-
alox scale
If I can get the awl from the tinker onto the back that would be grand. I'd really like a hook and scissors too but I think that's beyond my tools at the moment.
I might do something mad like add an extra main blade+file layer, just because I can.
I'll be left with a big pile of parts and the total cost is going to be crazy (cadet, tinker small, MFV+), but I think it's doable, and will be fun.
What size brass pin stock will I need?
-
-
Its possible with the awl- just use the opener backspring and two liners from the Tinker Small, and use a very short bit of pin held in place between layers for it. The awl won't twist on it too much. You could do the same with the philips if you wanted that, but I have concerns about torque. At that point, it might be easier to just get the saw back spring drilled for you and then add that to the middle of the Tinker, put on the Alox scales, and effectively have a Hiker Small in alox. :)
Another option for the awl is to leave out the small blade and get a nailfile from a Sportsman or Recruit, and then reshape that into an awl w/ a match striking surface. Or reshape the small blade into a warncliffe.
As for pins, 2.2mm brass throughout. Depending on which side of the pond you're one, Rotokid or Neil can probably set you up with whta you need
-
Great info, thanks for that. I'll contact Neil when I'm ready to start breaking things :D
I see what you mean with the awl, I might give that a shot if I'm feeling ambitious. Thanks!
-
You could put a awl from a 93mm alox in there. It should fit, if you really want an awl. It fits on a 91mm frame. The pin is a little loose but not too bad ;)
-
Oh, great - more knives I get to buy and destroy :D
-
Hehe see what I did. Turn to the darkside user24 it's cold and dark here. But that's where all the sak parts are lmao

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login