The Wingman has been shot down!
-
I only have one Wave and it's an older one. I might consider a 2004 Wave but I have to wonder about whether or not I want to stick another Leatherman into the line of fire like that. I might be a bit more upset if a better quality tool rusted like that- not to say a higher end Leatherman would rust mind you, just wondering whether I want to risk another one or switch to another tool entirely.
Def
-
... not fuelling the Leatherman vs dihydrogen oxide arguement ...
... I think a Wave would suffer, purely due to your working environment. So would an Octane though or any other "normal" tool probably. Favourites I'd have thought would be coated tools or highly polished ones .... which you might need to use with wet hands
I can see why the Zilla worked out for youI'm interested to find out what you end up with :D
-
@50ft-trad said:
... I think a Wave would suffer, purely due to your working environment.I also think that the Wave would suffer greatly in this environment. :(
@Grant Lamontagne said:
As much as I hate to add fuel to the Leatherman VS Vic debate I think a Spirit would be my only real option.I was thinking the Spirit might be the right choice also, but it must taken into consideration that one of the few things known to harm a Vic is putting it away wet and salty... :-\
-
Thats bad luck Grant :( I have a nice story along these lines but will give full details in a separate thread but it involves a lost knife that was at the bottom of a bag of wet rope for nine months.
At work I carry a wave on my belt but it gets covered up with clothing in the rain but I carry a Vic 111mm on my lifejacket in all weathers with no rust problems at all.
Dunc
-
Would be nice to see how it looks if you would diassemble it and wipe the rust of with some cloth and oil - what I'm after is to check if it's mostly aesthetic thing or is there a more serious damage done or starting to happen.

-
I have to agree that a Wave probably isn't the right choice either. There aren't many tools that can handle that kind of weather.
-
I wonder, if Leatherman did a run of one of their more popular tools in H-1, specifically for hostile environments, what they would sell 'em for?

-
A multitool made out of H-1 would be good if your not worried about scratches as you only have to look at it and its covered in them lol
Heres a link to my thread on some serious rust resistance /topic/38051
-
@mtool78 said:
Would be nice to see how it looks if you would diassemble it and wipe the rust of with some cloth and oil - what I'm after is to check if it's mostly aesthetic thing or is there a more serious damage done or starting to happen.
At this point it's a surface rust thing but if you look at the photos of the blade you can see that there are spots of corrosion that aren't near an edge, corner etc. That kind of rust is eating away at metal. If I clean it off now (which I am planning to do in the very near future) it will leave some scars on the blade which will be visible forever but won't affect the function. If I don't do anything about it the rust will eventually eat through the blade like it was an old fender.
As for the rest of it, the tools are most likely OK but the pivots are where most of the rust is coming from and I'd hate to be putting pressure on a screwdriver or something some time and have the weakened pivot give way. That happened to me once with a SAK knockoff and it wasn't fun or pretty.
Def
Sent from my MB860 using Tapatalk 2
-
@Grant Lamontagne said:
...but the pivots are where most of the rust is coming from and I'd hate to be putting pressure on a screwdriver or something some time and have the weakened pivot give way.Yep. My guess would be that there is some problem with two different steel types which causes corrosion for a part that works as a anode - would be nice to see which one is that part.
-
Just let the oxidation spread, then heat it up until the rusty color turns black then sell it as a tactical;)
-
-
I've taken apart and reassembled almost every single model of Leatherman. Personally, I can tell why the price point on the Wingman/Sidekicks are so cheap. They're Leatherman quality, but only just.
-
The front pieces (that have the Wingman/Leatherman logo), are super thin pieces of metal.
The washers are NOT keyed like in the Wave/Charge/and even Blasts
There aren't washers between all the functions
There's a plastic washer (not that big a deal)
For some reason, the polish is not nearly as good as on their other tools. It bothers me.
That said, the spring loaded pliers are awesome.
-
-
I didn't realise there was any plastic washers in there , I know there's a bronze/brass type washer under the one handed blades like the wave . Where are the plastic ones located ?
-
Grant any news yet on the Wingmans replacement ? I'm really interested to know if this level of corrosion is specific to the Wingman/sidekick platform or would there be similar results with the rest of the Leatherman range in the conditions you are using them in.
-
Not yet Dunc- it has basically come down to either the SOG Power Plier, Gerber Octane or the SwissTool Spirit. The Spirit or the SOG are going to need my last eClipse attached to them though, and I hate to use it and realize hoe much I wish I'd used it on something else! :P
The Octane is in the Jeep now- it'll probably be the next test subject. As for the Wingman, it hasn't been cleaned yet- I'll probably put it aside in a drawer at home with some desiccant so the rust doesn't continue to develop so that it's fresh for comparison shots when/if the next candidate goes down.
Def
-
It's official- the Octane is in my vest now. I'll report back after some time, bad weather and dirty jobs are behind it and we'll compare it.to the Wingman.
Def
Sent from my MB860 using Tapatalk 2
-
This is going to be a really interesting test of corrosion resistance. You're like Mikey in the Life cereal commercial - "Give it Grant, he'll rust anything." :D
Hopefully, it will survive the harsh Canadian elements better than the Wingman did.
-
Mavericks wingman Cougar couldnt hack it.
-
It's an awesome super power to have....
Def
Sent from my MB860 using Tapatalk 2
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
