Suspension hater video
-
The cost to the end user between a 16mm ring of 316 stainless steel - one forged and one done however they do it cheaply is about $100.
The finished product looks identical to the eye - but one has a breaking load of around 1200kgs and one at around 9000kgs.

Just a ring. Costs as much as a good Multi.
-
Well I have allways gone for the hammer forged tools when possible. However with a lot of companies out there, You never have any idea what you are getting.
-
To be fair though (as much as I lean towards Leatherman and Voctorinox), my new Leatherman tools (both the charge and Core) have casting marks on the pliers.
-
I'm not too sure about that!
-
@Nomad said:
The cost to the end user between a 16mm ring of 316 stainless steel - one forged and one done however they do it cheaply is about $100.The finished product looks identical to the eye - but one has a breaking load of around 1200kgs and one at around 9000kgs.
Just a ring. Costs as much as a good Multi.
$100 for one ring? You gotta be kidding. :o Or are you talking about just making one not mass production?
And 9000kg? That means I can hung my jeep plus three others on ONE of them without it breaking? :o
-
Oh no, it has them for sure. The Core, the Wave, the Charge, and the new Skeletool all have casting marks on the bottom of the pliers.
Am I happy about it? Absolutely not! Who wants to admit that they bought a tool that could potentially be a piece of junk? Nobody. But am I worried about it? No. Theres a 25 year warranty that says I bought a great tool!
Theres nothing inside of the tool that will make it self-destruct a day after the warranty is up.
-
$100 for one ring? You gotta be kidding. Shocked Or are you talking about just making one not mass production?
And 9000kg? That means I can hung my jeep plus three others on ONE of them without it breaking? Shocked
I didn't say $100 for one ring, I said the difference was $100. The Cheap one costs $50 to start with :)
Yes, Mass produced. You can really only hang four jeeps off it on paper
Angles and things have strange effects on actual breaking loads.
-
Aren't these lines just from the two halves of the forging press ?
I have a set of Knipex pliers, one of the world's best manufactuers, and an almost impeccable reputation, but it also has lines on the handles which look like mold lines, but I imagine it's from the forging process. -
@appletree_man said:
Aren't these lines just from the two halves of the forging press ?
I have a set of Knipex pliers, one of the world's best manufactuers, and an almost impeccable reputation, but it also has lines on the handles which look like mold lines, but I imagine it's from the forging process.Hopefully Bob will be along soon with the answer for us. :)
-
$100 for one ring? You gotta be kidding. Shocked Or are you talking about just making one not mass production?
And 9000kg? That means I can hung my jeep plus three others on ONE of them without it breaking? Shocked
I didn't say $100 for one ring, I said the difference was $100. The Cheap one costs $50 to start with :)
Yes, Mass produced. You can really only hang four jeeps off it on paper
Angles and things have strange effects on actual breaking loads.
$150 for one metal ring, and I thought knives and multitools are expensive...
-
Leatherman plier heads are investment cast, they always have been. As far as I know all the other multi companies use investment casting in their heads too.
Thank you for your email and your interest in Leatherman tools.
The pliers heads on our tools are not drop forged, they are investment cast with subsequent additional processing.
Mary Wintermantel
Customer Service Representative
Leatherman Tool Group, Inc.
(800) 847-8665 Ext. 438 -
Thanks for checking into it Spoon. I assumed that the plier jaws were forged, for added strength.
More about the investment casting process from Wikipedia: http://en.wikipedia.org/wiki/Investment_Casting
-
@J-sews said:
Thanks for checking into it Spoon. I assumed that the plier jaws were forged, for added strength.Me too, kind of took it upon myself to decide that and never do any research until someone else brought it up. :D
Is there a company that does forge their jaws? Victorinox, SOG and Gerber all show the same signs of investment casting as Leatherman. Assuming the forging process is too costly for the multi-market?
-
Hi All,
Being a Metallurgist, I've been using investment castings since the early 1970's along with conventional castings, forgings, bar stock and powder metal parts. Each one comes with its own set of issues. While a forging results in the densest stucture, a poor heat treat will screw that up. The problem with forging is that details like plier teeth, wire cutters and whatever have to be machined into the piece. The use of investment casting (sometimes called "lost wax" casting) allows these features to be cast to final dimensions. The tooling is expensive, the process is expensive and the savings, over machining, is huge.
To avoid the strength issues of casting, it is important to realize that casting defects outnumber forging defects and require a bit larger thickness. Nonetheless, if you fly or drive, you are riding on bunches of investment castings. the main issue is whether you are dealing with a knowledgable company like Leatherman (Tim is a degreed engineer) or knock-off companies.
Best - Joe
-
Thanks for the info Joe.
I don't have any problems with investment castings, I've subject my Crunch to some insane forces and it's held up fine.
-
We've been talking about MT companies, but I'm curious... what do other plier companies (Klien, Craftsmen, etc) do?
-
Hmmmm, good question. (I'm trying not to "ASS"ume anything else on this topic) :P
When I look closely at the serrations on my Leatherman jaws - both the fine ones and the coarse ones - it is obvious that they were cast in.
When I look at the serrations on a set of Klein heavy-duty lineman's pliers I have in the garage, it appears as if the serrations are cut in afterwards, perhaps using a broaching process. I can see machining marks and a slight "chatter" in the teeth.
So does this mean my Klein pliers were drop forged? (Like Joe said, a process that requires fine details to be machined in afterwards?)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login