And so it begins.... (My adventures into Alox!)
-
Ya I'd be curious too, to know why they decide the answer is no, but one has to assume its financially based. Maybe they think it might eat into the 91mm sales? Maybe 93mm sales are less profitable for them? Surely tooling up for a different spring shape cant be that bad, since they make their own stamping dies in house.
SB only does factory approved recombinations (mods) so that they still have a warranty, so Id be curious to know what they come up with, if Vic will be doing that 'mod' for them I'd love to see it.
-
You think they'd at least hand some files or the occasional fish scaler to the Farmer assemblers once in a while since it uses the same saw spring but as far as I'm concerned they can limit the 93 tool selection as much as they like. We'll tool up for those springs and mod the other stuff if they don't want to.
I think one of their marlin spike models with pliers and a scaler and our ti liners and HA scales would make an awesome anti-corrosion fisherman tool.
-
@bushidomosquito said:
.... I don't recall ever seeing a file in a 93 but it drops right in with a Farmer saw spring ....The Scibeer Tank (HA Alox 7 layers) sported a file, but no Fishscaler. He also did a model called the Farmer Abrasive that added the file.
@Syph007 said:
.....
SB only does factory approved recombinations (mods) so that they still have a warranty, so Id be curious to know what they come up with, if Vic will be doing that 'mod' for them I'd love to see it.Ya I was surprised too, but that is what he posted on his facebook page. He sometimes does his own stuff, but he usually gets approval like for the 111mm Damascus, but the quality of his 111mm Damascus does not reach that if a Victorinox manufactured and assembled knife, so they can't be too picky if they are special limited models. He's tougher on modders than Victorinox, but we know what to believe.
-
Finished up a new model finally. No scissors but pliers instead. Urban Mechanic I guess?
This is the first mod for me with no stock liners at all. This is using titanium liners and keyring spacer. Wow it's my first exposure to Ti, and it's a beautiful material, but a royal bitch to finish. Probably about 5 sheets of sandpaper and an hour or more per liner. I had to make some 1/2 split mandrels in my drill press to chew through it, hand sanding just doesn't cut it.
I'm happy with the end product though, and wow the pliers have a wicked good snap on them with dual saw backsprings.


It's hard to take a picture of such a tiny part, but here is the titanium keyring spacer all shined up.

A small glimpse of the titanium liners peeking through.

-
@Syph007 said:
Ya I'd be curious too, to know why they decide the answer is no, but one has to assume its financially based. Maybe they think it might eat into the 91mm sales? Maybe 93mm sales are less profitable for them? Surely tooling up for a different spring shape cant be that bad, since they make their own stamping dies in house.SB only does factory approved recombinations (mods) so that they still have a warranty, so Id be curious to know what they come up with, if Vic will be doing that 'mod' for them I'd love to see it.
Don't ask how I know but so far to date Vic will not be adding scissors to the alox line. Wish I was wrong but so far I am... :(
-
Ya I'd be curious too, to know why they decide the answer is no, but one has to assume its financially based. Maybe they think it might eat into the 91mm sales? Maybe 93mm sales are less profitable for them? Surely tooling up for a different spring shape cant be that bad, since they make their own stamping dies in house.
SB only does factory approved recombinations (mods) so that they still have a warranty, so Id be curious to know what they come up with, if Vic will be doing that 'mod' for them I'd love to see it.
Don't ask how I know but so far to date Vic will not be adding scissors to the alox line. Wish I was wrong but so far I am... :(
Sadness. :/ At least it helps keep you busy, though, Steve. :)
-
Ya I'd be curious too, to know why they decide the answer is no, but one has to assume its financially based. Maybe they think it might eat into the 91mm sales? Maybe 93mm sales are less profitable for them? Surely tooling up for a different spring shape cant be that bad, since they make their own stamping dies in house.
SB only does factory approved recombinations (mods) so that they still have a warranty, so Id be curious to know what they come up with, if Vic will be doing that 'mod' for them I'd love to see it.
Don't ask how I know but so far to date Vic will not be adding scissors to the alox line. Wish I was wrong but so far I am... :(
Sadness. :/ At least it helps keep you busy, though, Steve. :)
Yep until those guys up there ^^^^ make those springs. But it's all good some people like rivets and I'm going to have a machine for that soon ;).
-
@Syph007 said:
Finished up a new model finally. No scissors but pliers instead. Urban Mechanic I guess?This is the first mod for me with no stock liners at all. This is using titanium liners and keyring spacer. Wow it's my first exposure to Ti, and it's a beautiful material, but a royal bitch to finish. Probably about 5 sheets of sandpaper and an hour or more per liner. I had to make some 1/2 split mandrels in my drill press to chew through it, hand sanding just doesn't cut it.
I'm happy with the end product though, and wow the pliers have a wicked good snap on them with dual saw backsprings.


It's hard to take a picture of such a tiny part, but here is the titanium keyring spacer all shined up.

A small glimpse of the titanium liners peeking through.

Awesome job!
-
@Syph007 said:
No scissors but pliers instead. Urban Mechanic I guess?Replace that can opener with an inline Phillips and you have an Alox Mechanic, which is my favorite 91mm toolset. I consider the can opener the second most expendable 91mm tool right after the multiuseless hook.
There's something special about having pliers and a screwdriver layer wrapped in Alox.
Those ti liners and especially that key ring look so good.
I had to cut the key ring off the first one I put together with these laser parts :'( but the customer gets what he wants. -
No scissors but pliers instead. Urban Mechanic I guess?
Replace that can opener with an inline Phillips and you have an Alox Mechanic, which is my favorite 91mm toolset. I consider the can opener the second most expendable 91mm tool right after the multiuseless hook.
There's something special about having pliers and a screwdriver layer wrapped in Alox.
Those ti liners and especially that key ring look so good.
I had to cut the key ring off the first one I put together with these laser parts :'( but the customer gets what he wants.I agree that a can opener is next to redundant these days, but the screwdriver tip has come in handy more than a few times personally. :)
-
No scissors but pliers instead. Urban Mechanic I guess?
Replace that can opener with an inline Phillips and you have an Alox Mechanic, which is my favorite 91mm toolset. I consider the can opener the second most expendable 91mm tool right after the multiuseless hook.
There's something special about having pliers and a screwdriver layer wrapped in Alox.
Those ti liners and especially that key ring look so good.
I had to cut the key ring off the first one I put together with these laser parts :'( but the customer gets what he wants.Keyrings are good for key's

You guys do fantastic work!
Great idea to put the phillips and bottleopener in same layer. Some sort of pliers are always nice to have, many uses. How is it in hand with these tools sticking out? For me a must have is the inline awl, and ofcourse a good blade. Better yet two bladed. Being able to take it apart if a tool breaks, is a big bonus.Keep the good stuff up

-
Oh no offense intended for the OPs. Please don't take that the wrong way. Both guys are top notch in my book

-
Yep I'm a big keyring fan, but not for keys rather for lanyard attachment. Any knife I carry is literally attached to my belt and dangles in pocket. I don't want to lose anything! So I guess I dont specifically need the keyring, but some sort of attachment point at least and the keyring is the most convenient. I do like the other style as well Vic uses with the keyring anchor as part of the backsprings.
-
Well, I can understand why people like lanyards. It sure looks nice and it certainly has practical use. On the waterfront for sure. It's just not for me. I don't like dangling carrots in my pocket.
I carry custom belthangers or beltsheats. In hand, after a couple hours of carving a little keyring feels not so little anymore. Anything for an improved handleshape. And after foodprep or work I like to clean my knife quick and easy. It's just..(how do you say in english)..horses for corses?
JMHO -
Well I got my scales stripped last night. I tried taking video but it was way too awkward to hold a camera with all my safety gear on and get the job done well. I'm not a fan of chemical burns so I wear a respirator, old lab coat and full face shield. I'm glad I have a private backyard or the neighbors would probably call the police since it looks like I'm some kind of a mad scientist in the backyard with bubbling vats of who knows what!

Nothing like a batch of freshly exposed aluminum though.... These ones are going for 2 colors, red and natural (the gray look) hard anodize. I'm also going to put in some of the 6061 aluminum liners I made by hand to see how HA on liners looks and holds up. I think color matched red liners and scales would look cool, and the liners are somewhat protected by the spring sandwich so they should hold up pretty well.


-
I agree that a can opener is next to redundant these days
Just goes to show why the SAK has such appeal. One man's meat is another's poison. I use the can opener probably more than any other tool. Every can I open at home is done with a SAK!
fair enough mate, it just seems that nearly every tin these days comes with a ring-pull top.
-
@Syph007 said:
Well I got my scales stripped last night. I tried taking video but it was way too awkward to hold a camera with all my safety gear on and get the job done well. I'm not a fan of chemical burns so I wear a respirator, old lab coat and full face shield. I'm glad I have a private backyard or the neighbors would probably call the police since it looks like I'm some kind of a mad scientist in the backyard with bubbling vats of who knows what!

-
First time I've taken one of these apart. I was curious to know how the firesteel was attached. Its just a custom shaped liner with the firesteel pinned to it.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login