Skeletool owners club
-
Just tell the wife that MTs, SAKs, and flashlights are cheaper than keeping a mistresses ::)

Oh I'm definitely using that one! :)
I'd love to! But she'd smack me into next week, for sure! Well, not smack me, but she has a way of making me wish she had, instead of the other things she does to let me know she's various levels of ticked off at me...

But I'm a good boy for the most part... I'm with Chako; wife and kids always come first for me.

-
Skeletool arrived today. Good fit and finish, nice size and weight. I am now in yet another club. LOL..
DSL tech guy at house today to replace modem. He had a Surge on him. I must say the Surge is pretty tempting.jwh
-
Mower air cleaner change got ugly as the dog wanted to fight the mower and Skeletool.

-
My one and only mt for the last four or five years, after looking for something more minimal than the gerber. And has got me out of trouble on many occasions . Everything there to tackle the jobs mt's are built for , so a very big fan . Only drawback my early model does not have the semi-serrated blade . Would it be possible to replace it ? . I am sure one of you knows
. Count me in the club
. -
The skelotool's the first Leatherman i ever had. It's been 2 years and i still love that thing!!!!
-
I really wish i got the CX. The serrated blade was a surprise on my skeletool. Really didnt want it. The pic of the tool was old and had the straight blade option. Nice noob move on my part.
Until further reading on this fine fourm I was informed of the moving change.
The serration is a nice option,but agressive cutting really dosent apply to my uses with the sleletool. Im sure it will be needed for some tuff stuff someday. -
With all the people here talking about how they should have gotten/bought another version of the Skeletool, it seems that I've got the right version for my use


-
Getting heavy gauge AWG ready for a pull is hard enough with a straight blade,serrated blades are plain dumb for stripping back wire. The skeletool blade is far better than the sheepfoot blade I work with still. Swiss Knife Shop offered to take the tool back and replace it with the CX.Obviosly I declined and SKS apologized for the mix up. Could of would of should of. I will gripe about it till a CX falls from the sky.My Skeletool does not suit my needs.

-
@Bensasupertool said:
I really wish i got the CX. The serrated blade was a surprise on my skeletool. Really didnt want it. The pic of the tool was old and had the straight blade option. Nice noob move on my part.
Until further reading on this fine fourm I was informed of the moving change.
The serration is a nice option,but agressive cutting really dosent apply to my uses with the sleletool. Im sure it will be needed for some tuff stuff someday.After reading your post I wondered if a " blade trade " might be an option with the Skeletool :). I dont know if this possible :-. But could be a way around the problem ;).
-
Traded a used but decent Juice KF4 for my Skeletool CX. Should I ever find a light-weight allow crescent wrench small enough to fit in the carabiner area there is going to be some passive modification done. Not enough to voice the warranty, but the missing link hopefully will get rectified. :D
-
Here is my first Leatherman, bought it a year or so ago:

Just sent it in as two of the three springs in one of the handles had broke and the blade had about 3/4" of the tip missing. I took the above pic before sending it in. I work at a potash mine, so even though I oil it all the time it rusts like nuts. I have a new Skeletool CX on the way too, it will be my EDC multitool around the house so I don't have to bring my other one home all the time. Love the Skeletool design, everything I need, nothing I don't.
-
potash is an alkali, right? That's gotta be hard on most metal equipment.
-
Hi there,
I've got myself a Skeletool CX Plain Edge for a while now, though it's getting very apparent that the screw that's initially holding the blade is getting rather loosened. Is there any fix to that, that any of you lot know of by any chance? Everytime i tighten the torx screws it's getting awfully loose whilst it's not even /that/ old yet..
Also, i've disassembled it as to clean out all the rubbish as it was making a rather "screeching" noise when i opened the blade. Muck and hardened grime all under it (That's when you know you're using your Multitool well, right? ;-) ). I've written down the parts list though i might have made a mistake.
From bottom to top:
Body
Copper/Brass ring
Blade
Small plastic ring in the middle
Larger plastic ring
Outer ring with the indent to keep it stuck
Torx ScrewIf any of you lot have an assembly guide it'd be much appreciated! I can't seem to get a guide from Leatherman theirselves.
Regards,
P67 -
Welcome to the forum P67. Nice to have you here. When you find the time visit our New members forum and tell us more about yourself so we can give you a proper welcome. :D
As for your Skeletool... an old trick is to put a bit of Loctite on your screw and then screw it in. I think most people use the blue one as it allows for easier removal if needed. As for the screeching sound, you might want to put a bit of oil on the pivot.
-
@Chako said:
A few Skeletool related photos taken this morning.
It's all different skeletool?
The first apparently coated with gold - not released officially.
Second - Rei.com edition.
Third to sixth-Limited Color Edition.
Eighth - CX first versions
Tenth - normal skeletool
Eleven-skeletool first versions
The issue with the seven and nine - they are the same or different? If different, what's the difference. -
A few Skeletool related photos taken this morning.
It's all different skeletool?
The first apparently coated with gold - not released officially.
Second - Rei.com edition.
Third to sixth-Limited Color Edition.
Eighth - CX first versions
Tenth - normal skeletool
Eleven-skeletool first versions
The issue with the seven and nine - they are the same or different? If different, what's the difference.1st gold plated Skeletool from TexasToolCrafters on eBay
2nd red REI edition
3rd, 5th and 6th colors limited edition from about a year and a half ago, first sold only in Europe, I'm not sure if they later sold in the US too.
4th Cabela's 50th Anniversary Skeletool.
7th a factory mistake Skeletool CX labeled as Freestyle CX
8th CX first edition
9th CX new style
10th SS first edition
11th SS new style -
Okay, I am officially a member now as my plain blade Skeletool arrived today in its original box. Just so it does not get lonely I have a gentley used Freestyle on the way too.
Why is it then that I now feel the need for a Skeletool CX too? (Would the Freestyle feel left out if it does not get a CX playmete too like its big brother Skele?)
And yes I also have the twin Style Leathermans, scissors and pliers versions.
So, "Now I am ready"....or so Leatherman tells me. Yet is always seems I am not ready unless I have that next tool with a different compliment of bits/blades.
Tony
-
Many folks see the MUT as the Skeletools big brother. Just saying.

seriously though, congrats on the new MT. I'll be interested to hear which you like more; the Skele or the Freestyle. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
