Show your tool combos
-
Will have to take some pics soon, but what I tend to go for is the lightest way of covering my needs without redundancy.
I always have a Rambler on my keys unless I have swapped it for the Style PS which I also really like.
So to compliment that, I tend have something larger like a 91mm SAK or a KF4. Current favourite SAK is a Special Mechanic.
-
@nuphoria said:
Will have to take some pics soon, but what I tend to go for is the lightest way of covering my needs without redundancy.I always have a Rambler on my keys unless I have swapped it for the Style PS which I also really like.
So to compliment that, I tend have something larger like a 91mm SAK or a KF4. Current favourite SAK is a Special Mechanic.
I noticed that one in one of your other posts a while back and had to wiki it :D Neat little tool, and one I'd not come across before

-
Same EDC combo I've had for a while now...
SOG Crosscut
Sheffield 12010
Victorinox OHO Trekker

Crosscut because the single most used tool I need are scissors, and the SOG's are the best in the industry, IMO. It's eyeglass screwdriver is also a necessity for me. Tweezers are also a bit better than Vic's. I carry the Sheffield for the pliers (I've never needed a heavier pair in EDC), and the small phillips is excellent. It seems to do everything, but nothing particularly well. Even that tiny can opener works... terribly slow, but it works. The Trekker is primarily for the OHO blade, but the flathead is also my go-to general pry tool.
50-ft Trad: I recently picked up 4" locking pliers to try in tool combinations as well. The problem is, that for almost the same weight, I could carry a Leatherman juice, so I'm not sure the locking ability is worth it for the dedicated tool.
-
@50ft-trad said:
Will have to take some pics soon, but what I tend to go for is the lightest way of covering my needs without redundancy.
I always have a Rambler on my keys unless I have swapped it for the Style PS which I also really like.
So to compliment that, I tend have something larger like a 91mm SAK or a KF4. Current favourite SAK is a Special Mechanic.
I noticed that one in one of your other posts a while back and had to wiki it :D Neat little tool, and one I'd not come across before

It's just such a useful little thing with so little girth ;)
-
Here's a few.




-
My favorite combo

-
OK so heres the pix of my fav combos

Swisschamp and LM Mini
DofE and Sideclip

Champion Plus and KF4
Astronaut and MP425 -
And now that my browser has decided to work again...

Astronaut and modded FuseAlthough I doubt Eric needs any more kudos,I have to make the point of just how flexable my custom Skinth is

Lastly heres a line up of my usual duty SAKs


In order,SuperTinker,Explorer,Delux Tinker,Astronaut,and Champion Plus -
My little pocket carry,

Along with my modified Altoids carry


My custom made holster for my flashlight/multi-tool,

And lastly my murse, too may pics to post all,
JR -
Splendid pics guys

-
@50ft-trad said:
Just revisiting this thread, and I must say I'm loving these two chip


Thanks, I have shelved the ppp/compact combo due to the gears i find are genuinely uncomfortable on your hands when using the drivers. But the paratool/pruner pioneer combo I keep in my versapack and are my actual EDC when out and about.
-
@50ft-trad said:
Just revisiting this thread, and I must say I'm loving these two chip



Thanks, I have shelved the ppp/compact combo due to the gears i find are genuinely uncomfortable on your hands when using the drivers. But the paratool/pruner pioneer combo I keep in my versapack and are my actual EDC when out and about.
I upgraded from PPP to Paladin PT-510. Same format, but with nicer plier heads and gear covers. Not easy to track down on these shores, but well worth the investment ;)
-
@50ft-trad said:
@50ft-trad said:
Just revisiting this thread, and I must say I'm loving these two chip



Thanks, I have shelved the ppp/compact combo due to the gears i find are genuinely uncomfortable on your hands when using the drivers. But the paratool/pruner pioneer combo I keep in my versapack and are my actual EDC when out and about.
I upgraded from PPP to Paladin PT-510. Same format, but with nicer plier heads and gear covers. Not easy to track down on these shores, but well worth the investment ;)
I will have to keep an eye out as I really like the smooth action on opening the ppp and the convenience compared to the way the paratool unfolds, it's just those gears. And due to the fact I do manual labour for a living my hands are far from hands that do dishes.
-
Love these kinda combo's!
Favorite combination of mine is a Spirit (plus), Swisscard (lite), and little Director (stainless).
I pair that for the blade with an alox SAK of choice, like a Solo or Woodsman, or a small folder.
A pretty combo that I use is alox Deluxe Tinker, Swisscard, alox Rambler, and a small folder.
Sorry no pics this time!
-
I buy the shears here: http://countycomm.com/premshears.html
I use them every day, much safer than a blade for opening packages.

-
This is the nightmare combo for the hourly wage guys at work. The 3 MT's are rotated during the work week. MUT wrench and the 11 in 1 really save unwanted trips to the tool bag or the truck. Having the MUT wrench has proved to be invaluable a few times during the first week of use. A few eyes were rolled too,as a trip to the service truck has the inpending smoke break squashed.


-
This is my daily edc, ppp ,tinker and micra,

and my work edc also with tinker in my pocket

and Cak on my keychain.

-
Great thread!

Here's my pretty much always on me, EDC; an Executive and my HCRI Preon 1.

These are always in the MaxPed Double Sheath on the side of my Timbuk2 messenger (EDC) bag; a Work Champ, and a Zebralight SC60w. I occasionally swap out the WC for my CT41 or my CT Lite.

This is my perfect hiking/camping/backpacking combo; my Wenger PER Ranger 179, and my Juice S2. I really like the tool compliment of these two together, and there's very little overlap between the two. I also tend to EDC the S2 in the little LM Juice clip-on holster as well.

-
I know this is a slight bit of thread necro, but I thought this was the best place for it.
I'm always trying different pairings of small tools, and came across this today.
My Small Tinker (an old well-loved model I got in a trade), and a Leatherman Style PS.
I would really prefer a blade larger than what's offered on most keychain tools, and the Small Tinker offers that, plus drivers that are very robust, in comparison to most keychain options. The pliers on the Style PS are better than a SAK with a plier layer, and the small fold-out scissors are actually very good. I think the only tool redundancy are tweezers.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

