Loose plier joints
-
My oldest tool is my sideclip, ten years now, and it has been used hard. I bent the pliers from twisting it and bent them back myself. Then i had to file a side of the cutters that had a ding. They still cut paper, and stranded wire is no problem. The rest of my tools are a bit newer and the pliers have loosened up a bit but al still cut just fine.
Glad you found a fix for your issue though!!!

Sent from my myphone using Crapatalk
-
@Mercury said:
Then i had to file a side of the cutters that had a ding. They still cut paper, and stranded wire is no problem.Wow, there is no way I can cut paper with any of my MT pliers, (well, maybe the NIB ones ::))
Do you "force the jaws together" with your other hand to reduce the small distance between the cutters? Or does it work anyway?
I guess I could try to touch up the cutters, but I doubt it will work since the cutters look fine

-
I've always woundered how people can say "I've used this juice for 5 years every day" in their youtube vids, and the pliers look...
I'm thinking that usually means "I've carried this in my pocket for 5 years..."
Heh, I'm kinda guilty of that.
But really, I just use my pliers infrequently and my wire cutters almost never. When I do use the pliers it's usually on nuts, pipe fittings, the kind of thing that you grip sideways, or just for pulling or pushing, like with wiring harness connectors and stuff. I don't do a lot of wire cutting and I usually use a real wire cutter/stripper when I have to. My MTs get used mostly for cutting and screwdriving.
-
@Syph007 said:
As far as I know the pivot is just a normal rivet with the head ground off, so peening to tighten it up is what I'd try. Its a big steel rivet though so I don't know how much force it would take.How do you know what side of the pivot to tap?. My Leatherman Squirt PS4 scissors is a touch loose so they dont cut as nice as they should.
-
If you look at the inner circle and it moves when you move the handles that is the side to dot with the center punch

I have just looked at a skeletool, Super tool and Core to check this but I'm not sure about other tools

-
@sparky415 said:
If you look at the inner circle and it moves when you move the handles that is the side to dot with the center punch
I have just looked at a skeletool, Super tool and Core to check this but I'm not sure about other tools

Thanks. That is what I did on the pliers of the PS4, but I wasnt sure it would work the same way as the scissors.
I appreciate it.
-
Okay. Now Im stumped
.I just put a pen mark on both sides of the pivot, but they didnt move, so now I dont know which side to peen. Any other way to find out??.
-

It should look like this Mash

It looks like it would work on my Micra But I don't own a squirt :-\
Turn a bright light on :D -
It should look like this Mash

It looks like it would work on my Micra But I don't own a squirt :-\
Turn a bright light on :D
:D. I will give that a try with the bright light, but it will have to wait till I get home from work.Thanks man..

-
Good luck


I bought myself a magnifying glass at the last carboot sale I went to :-[
:D
-
Then i had to file a side of the cutters that had a ding. They still cut paper, and stranded wire is no problem.
Wow, there is no way I can cut paper with any of my MT pliers, (well, maybe the NIB ones ::))
Do you "force the jaws together" with your other hand to reduce the small distance between the cutters? Or does it work anyway?
I guess I could try to touch up the cutters, but I doubt it will work since the cutters look fine

Sorry it took me so long to respond!! No I don't have to force the jaws together, they just work. When I say cut paper, I don't mean perfect, but it does cut.
-
I have used any of my Gerber MP 600s for about 5 years (before the first got replaced when i sent it in for a sharpening service, the 2md got stolen at about 5 years old and now i got myself a differently equipped MP 600 to replace my old BO Bluntnose).
The pliers got a bit looser, but they did not develop much play, the cutters all did stil l cut. And as a janitor and rider of old Motorcycles i really did use them all, twisting sideways, holding things, tuightening nuts and bolts, cutting too thick wire and so on.I kinda like teh easy opening, well worn in pliers and have to get used to the somewhat stiffer action on the new Bluntnose with it´s carbide cutters.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login