Any love for Wenger?
-
I've actually had better luck with the Wenger opener, less jagged edges with it. I feel that it's a bit easier to use left handed. I've opened large coffee cans and such with it with no problem.
-
@Smaug said:
I tried to open a coffee can with my Wenger EvoGrip S16 this morning, and it was an epic FAIL. If that were a can of beans and I were stuck in the wilderness with nothing else to eat, I wouldn't have starved. But I would have sliced my fingers up, gotten infected, and died from gangrene.It left sharp, jagged edges on both the outside AND inside of the cut lid, and I was only able to cut about 2" before it couldn't get purchase on the rim any more.
That said, I suppose this can opener was designed for smaller food cans, like 20 oz. and under, and for that, I recall it working just fine.
Wenger should beg and plead with Victorinox to "share" the can opener technology, or they should just leave the tool off altogether on any knife that is not aimed at campers. Replace it with a sturdy flat phillips and just admit that the common man doesn't need it any more.
(Wenger is owned by Vic) ::)
-
(Wenger is owned by Vic) ::)
Yes, I know. What is your point? It doesn't necessarily mean they allow spill-over of technology between the brands.
And I've seen nothing saying they won't. Point is, Wenger is it's own brand within the brand, and maybe Vic wants to keep Wenger knives the way the are for posterity, who knows? Just saying.
-
I have a new "do want" Wenger...
-
Its nice, where did you get it...
-
Don't have it yet, it's only on the wanted list...
-
Old 91mm Wenger.
-
I was them many years ago and liked but for myself I only recently discovered the small Wengers as well... A bit earlier had a Ranger 55 (still have) but that was it. My discovery was when they introduced the EvoWood scales, I got one, then a second then a third just for the scales... A few pics here. However there are other older classic (not evo) scaled Wengers that I like more: **Serrated Master ** and **Tradesman ** (my favorite for the Philips making it even more rounder and especially for the small clip point blade). I also have a SI for the sake of it. A small island of Wenger SAKs in a (not sea, not that big) pond of Vic SAKs I have :D
Pics of my EvoWoods follow in two posts due to my images limit per post.
-
A few more:
-
@ICanFixThat said:
Old 91mm Wenger.Oooh, that's a lovely old knife. When would you say it was made?
-
@ICanFixThat said:
Old 91mm Wenger.Yummy. Do you have a pic showing how thick the tools are on this old one? Thanks
-
@ICanFixThat said:
Old 91mm Wenger.@J Mackrel Jones said:
Oooh, that's a lovely old knife. When would you say it was made?Sorry I could not say right now other than I think it's before 1950. Need to research dates, it could be much earlier. You, Jazz, and James C. would likely be the best to say.

-
My guess is the 1920's. Wenger used this same shield on their carbon-steel knives that had fiber handles, which would be before 1921 or so and the new stainless steel with a metal shield with crossbow and caplifter with scraper - as shown by photo in the sequence on page 43 of the SAK Owner's Manual. The Wenger history is always a bit mysterious.
It is interesting that Wenger had a caplifter on their screwdriver in the carbon steel days (yours appears stainless) - long before Victorinox had a caplifter on their 'driver. -
@J Mackrel Jones said:
My guess is the 1920's. Wenger used this same shield on their carbon-steel knives that had fiber handles, which would be before 1921 or so and the new stainless steel with a metal shield with crossbow and caplifter with scraper - as shown by photo in the sequence on page 43 of the SAK Owner's Manual. The Wenger history is always a bit mysterious.
It is interesting that Wenger had a caplifter on their screwdriver in the carbon steel days (yours appears stainless) - long before Victorinox had a caplifter on their 'driver.I was thinking it was maybe a bit newer than that given the rivet style, high polish, and great condition. It might be fairly early in the life of the Tahara brand as I have to think the red enamel sheild (I think it's enamel) is quite fancy and they wanted to show this as a premium model. I'm not sure if when they started the Tahara brand for SAKs if they were still making the Tahara polishing machines or if that was history. It would be good to know when Tahara really got started as a SAK brand.
-
Could be the Tahara name on SAKs came before the Tahara machines for the tumble-polishing of silverware which were sold to cruise lines in the 1920s and '30s - "the last machine sold to the Hotel Schweitzerhof in Bern in 1942." Lisa Wenger suggested the name in 1910. But when did Tahara actually first appear on the tang of a knife; and when did Wenger stop using this tang stamp?
An ad from around 1950 describes their Staff Officer’s Knife (2 blades, 2 openers, scissors, saw, reamer, corkscrew, toothpick & tweezers, bail) of “finest Swedish Tahara Stainless
Steel” priced at $13.50. -
@J Mackrel Jones said:
Could be the Tahara name on SAKs came before the Tahara machines for the tumble-polishing of silverware which were sold to cruise lines in the 1920s and '30s - "the last machine sold to the Hotel Schweitzerhof in Bern in 1942." ....Yes, it could be, and seems like it probably was. I just checked information published by Wenger and the name was trademarked in 1910, and as you say the last machine was sold in Bern in 1942. It would seem that it would have appeared on a pocket knife before the polishers based on the trademark date, or at least before the sales of the polishers were completed. It was probably used on tableware first given the trademark date. I'm not sure, but I think Wenger is saying the Red Crossbow w/SUISSE logo is only preceeded by the very similar crossbow logo without SUISSE (and of course no logo on the scales), and then followed by the metal variations.
-
This Wenger was sold by L.L.Bean as the **Swiss Outdoorsman ** around 1991 it looks like. Anyone have any more information on it, like another name or Wenger identifier?

-
Wenger Computer Wiz (#16952), with T-10 Torx screwdriver.
Came across this while trying to come up with some info on the Swiss Outdoorsman (no other info, but nice find
), and figured I'd throw it in.

-
Wow, I love this one, was it a special run for somebody? I wish it was a T8 though. Great find

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
