Ka-Bar Knives
-
I have developed a fascination for the Ka-Bar USMC fighting knife or the USAF survival knife as a camping/survival knife. Have any of you posters any experience with Ka-Bar knives? I'm currently using an old Buck General (7 1/4" stainless blade and phenolic handle) but the steel is incredibly hard to sharpen-in the field it's a waste of time. Thanks for the info, Bill.
-
I have one of the Ka-bar Dozier folders & am very impressed with the edge on it. It takes it & holds it very well IMO.
Tom
-
I have had a few KaBars over the years. They remind me of Harley Davidsons- decent enough, not the best or brightest, but with a rep that blows anything else out of the water.
The military issued KaBars only because the price was right and they were one of the few companies at the time able to crank out the type of numbers that Uncle Sam wanted, not because they were the best suited to the job.
Def
-
Thanks, fellows for the input.
Actually, jzmtl, the carbon steel blade was one reason I was looking at the Ka-bar. My Buck 120 has some grade of stainless that is VERY hard to sharpen-tiringly so. I have a Gerber diamond rod and a Smith sharpening kit, and both are hard put to get a consistent edge on the Buck. As a matter of fact, when I got this knife in the early 70's, Buck used to ship a bolt which they had supposedly halved with this knife. Perhaps hype, but I wouldn't doubt this blade could do it. Unfortunately, it's also somewhat unwieldy.
May I ask, what are your opinions of a good survival/wilderness knife under $100 US? I would prefer no Rambo-type behemoths (my Buck is in that neighborhood) or folders.
Thanks, Bill.
-
I would get a Cold Steel SRK. One of my favorite fixed blades!
-
Biru,I don't know if they would be what you'd have in mind,but have you considered a mora? Inexpensive,easy to keep a good edge on,and by most accounts,sturdy.
-
@Biru said:
May I ask, what are your opinions of a good survival/wilderness knife under $100 US? I would prefer no Rambo-type behemoths (my Buck is in that neighborhood) or folders.Hey Bill. Check out the Ranger Knives http://www.rangerknives.com/ "Ready Detachment" series knives. Right now I'm trying to decide between the RD4 and RD6 knives. Justin, the owner/fabricator of Ranger Knives is one helluva good guy and his knives are a hard bargain to beat.
-
Yeah Kabar is right up there in the rambo size so if you are trying to get away from it, you probably want to look elsewhere.
-
For under $100 you have a ton of options. Bookmark the Sale/Trade forums on Bladeforums.com and check that every day, some good deals pop up there every so often. The Becker Knife and Tool line has a lot of blade sizes and are really nice knives with nice sheaths.
I can't vouch for Ranger *knives * per se, but I can say Justin is really helpfuil and responds quickly to emails. I ordered a Tomahawk a while back and everything ran smoothly. If there's something you'd like to add something or otherwise modify on an existing knife in his line, he'll be able to sort it out and you can probably get one for around $100. He also does straight from scratch custom designs, but I don't know how much those go for or how he prices those.
-
Thanks for all the info! I'm going to look into these. I had been looking at the Ka-bar USAF survival knife. It has a 5" carbon blade, somewhat shorter than the 7 I've got now. I like the big blade if I'm splitting or chopping, but it's not very useful if you're skinning fish or other fine chores. I carry a Swisstool to carry that weight. I'll have a look at the ones you've mentioned.
As a side note, how about Ontario knives? I've never heard of them, but some of their models seem interesting. I'd like to stick below $100 US as I'm not really in any life threatening situations, but I do want a knife I can trust. The Buck has been above and beyond all these years, but sharpening it has always ticked me off. I'm thinking of sending it back to have a factory edge put on it and starting again!
Thanks to all, Bill.
-
@Biru said:
As a side note, how about Ontario knives? I've never heard of them, but some of their models seem interesting. I'd like to stick below $100 US as I'm not really in any life threatening situations, but I do want a knife I can trust. The Buck has been above and beyond all these years, but sharpening it has always ticked me off. I'm thinking of sending it back to have a factory edge put on it and starting again!Thanks to all, Bill.
Well, i have an Ontario TAK1 and is a very good knife. If you want a very sturdy blade, at a good price (i've seen one around $70.00 US), take a look at it. The one i have is the good old 1095 carbon steel at 57 Rc, easy to sharpen and holds the edge for a long time. If you want something fancier, get the D2 version, but D2 is harder to sharpen, but has more corrosion resistence.
Carlos
-
I was in the Marines and never used or issued a Ka-Bar. The knife everybody wanted was the Gerber MKII or issued a M-7 bayonet. The army at the time was issued the M-9 bayonet. The Marines stuck with the M-7 up until the 2001 when they used a version of the M-9. I was long gone at that point. I was never issued a Ka-Bar. I carried a Cold Steel Recon Sterile (it had no markings). The knife got beat up during survival training but never broke. The black coating chipped off and started to rust. The blade went dull in a few days and the tip chipped. I tried to fix it in the field and ruined the point but I got a point back on it. I called Cold Steel when I returned and asked them to fix it. I figured I would just send it out to Cold Steel for repair. When I got back to my base I called and was told that I would have to pay for the return and the repairs. They also told me it would take 6 to 8 weeks. I explained I was in the Marines and possible shipping out in a week or two. They told me there was nothing they could do. I went out and bought a knife at the local Mercenary store and was happy. I still own that Cold Steel it's lying in the bottom of my sea bag. The Knife was very strong and probably would have kept using it if Cold Steel fixed it. Every chance I got I made sure any boot entering the fleet was not going to buy a Cold Steel. It's been a long time and I still get angry when I see a Cold Steel knife.
Don't quote me on the exact dates of the bayonets I am not a bayonet expert.
-
Man, that sucked. I would be PO'ed at Cold Steel, too, for that. However ::) , do love Cold Steel's Master Hunter knife. Comfortable, long handle and an excellent blade, but the VG-1 San Mai III steel is unknown to me.
Biru, check out Gerber's LMF II knife. I've heard nothing but good about it and it's a workhorse.
-
If I had to start over from scratch, nekked! :ahhh
and I wanted it now, and the best customer service, before and after you get it;I'd get a Ranger RD series blade. Justin makes em last and tough as anything.
-
Thanks again fellows. I need to check out Cold Steel as I'm not familiar with them. My little sister purchased a Camillus USAF survival knife for me. It's the first knife like this I've ever owned. I like it greatly, but it's plain and its use as a survival knife would be interesting to test. It is very sharp, and has a very sharp point. To get it that way, Camillus had cut the blade very thin at the front of the blade so I wonder how the blade would stand up to abouse there. Still, I think it balances better than my General. I'm going to fool around with it and see how it goes. I'm in the process of checking out the suggestions you fellows pitched.
Thanks to all again, Bill.
-
That's odd- I really like Cold Steel products and I have beaten more than a few of them over the years and never had a problem. A friend of mine (and I use the term "friend" loosely) bought an SRK and pounded the hell out of it. Then, he saw the first PROOF vid and took the kid gloves off. He abused that thing soooo bad it wasn't funny, and it held up fine.
A number of years ago Cold Steel's Customer Service had a reputation for being pretty bad. I heard horror stories of guys being blamed for "abusing" the knives resulting in the breakage, even in legitimate cases. I can't say whether that happened for sure or not, but enough people were saying it that I'm inclined to believe it. In recent years though, Cold Steel seems to have changed directions when it comes to CS and I have only heard good things about them these days.
Of course I fully understand the kind of grudge you can have if you are treated badly by a company. I've had a few that treated me like crap, and I stuck it back to them pretty good in most cases.
Fortunately nowadays companies are starting to realize that quality CS is just as important as the quality of the product itself.
Def
-
Hi, first post on this Forum.
I have a KaBar story for ya. I'm and old fart. In the late '60's I flunked out of college at 19 and enlisted in the Army to avoid the draft. Sounds weird, but if you enlisted you could pick your school, while the vast majority of draftees went infantry.
So anyway, a year after Basic I got orders for Vietnam. I knew the M7 bayonet (predecessor to the M9) served no function other than to be a sharp point on your M16, and I wanted a real knife to carry. So while I was on leave I went knife shopping. They used to have a discount store chain called Bradlees -- kind of like Target today -- so I stopped in there and went to the sporting goods department. In the display case was a large gleaming knife that struck my fancy. It was something called a KaBar. I asked the sales girl to show it to me and I studied every inch. There was no price tag on it, so I asked the girl what it cost, and if there was a sheath for it. She looked around in the case and through all the cabinets but couldn't find anything. It was also the last one in stock.
"Since it doesn't have a box or sheath, how does $3.00 sound?"
Sold.
I took it home and decided that it was too shiny to carry in a war zone (the blade was polished), so I treated the blade with gun bluing and oil, and stoned an edge on it. I went to a Tandy leather shop and picked up some thick hide and cut out the shape I needed and riveted the corners of the raw sheath. But the leather was too thick to sew with a needle. I took the knife and sheath down to the shoemaker that had a shop in the old neighborhood that my folks grew up in. They called the little old man "The Communist"! I didn't get into a political discussion with him. I told him what I wanted, and even left the knife with him to make sure there was plenty of room between the rows of stitching. When I went to pick it up, he asked me why I needed a knife so big. When I told him where I would be using it, he just waved his hand toward the door and said, "No charge.".So that was my steel buddy. About a month before I was due to rotate home I was sitting around the hooch throwing the old KaBar at a wall of sandbags. One throw went way off, glanced off the wall, hit a wall locker and fell on the concrete floor. When I went to pick it up, it was in two pieces! The blade broke away from the handle right at the hilt.
I was just a little peeved with myself, and flung the pieces into the trash.
It wasn't until I got home that I found out that KaBar unconditionally warranted their knives. I could have gotten a free replacement! Now I was REALLY peeved with myself!
I'm not sure if their warranty policy has changed over the years. And I don't understand why the knife broke where it did. The steel shouldn't have been that brittle, unless the chemical bluing changed something.So decades later and I'm now a dog handler with a volunteer search and rescue group. When I need to cut a rope or open an envelope, I use my pocket folder. But there, hanging upside down on my pack strap for all the world to see, is a full-sized KaBar. Just in case...
-Dave P., K9-Handler
-
Welcome to the forum Dave! Always nice to have another dog-man here! :D
Great story, but it's too bad you lost the trusty old karbar. Good price on it though... I think the last KaBar I bought was $80 or so. When you have a need for a big, tough knife, nothing else will do!
Def
-
Welcome to the forum mate :)
And a nice story too, especially about the leather worker letting you have the sheath for free :), there's not a lot of support for service personnel these days >:(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login