CRKT Tool
-
Look what just arrived in the mail!
I just walked in the door and found it- initial impressions soon!
Def
Sent from my MB860 using Tapatalk 2

-
@Grant Lamontagne said:
Look what just arrived in the mail!I just walked in the door and found it- initial impressions soon!
DefSent from my MB860 using Tapatalk 2
Quick.. Wrap it up and send it to me..
:D
Looking forward to hear your thoughts.. :) -
That's odd Allan, I hadn't heard that Satan's air conditioner was malfunctioning ....
Def
Sent from my MB860 using Tapatalk 2
-
Haven't you heard??

-
The only thing I'd heard is this:
FAMILY GUY - Bird is the Word!
:D
Getting back to the more serious subject of the CRKT Tool, it seems like exactly the same tool I remember from SHOT- if there are any differences between this production version and the pre-production version I saw at the show, I can't find it.
It comes with a rubber bit housing with nine bits and an adaptor that fits over the phillips driver- although one of the phillips bits is exactly the same size as the fixed driver and one of the three flatheads is the same as the fixed flathead which seems a bit pointless to me. On the up side it'll make the decision of which ones to ditch in favor of a Robertson or Torx bit a lot easier.
The switchblade screwdrivers are a bit addictive, but also kind of pointless. They are fun and once the driver is out it's got a fair bit of reach and since it's a T handle you'll get lots of torque with it so it's all good- I just don't know about the opening mechanism- it's fun though so we'll just go with it!
I like the blade- I know some folks are going to complain that it's not long enough since it only takes up about two thirds of the tool, and sharp readers will point out that this was one of the problems I had with the Wingman/Sidekick models. I can't explain it, but it seems to work better on the CRKT Tool- perhaps because it looks more like a blade that a contractor or tradesman would use for scoring wood rather than the tactical type blade on the Wingman/Sidekick so it doesn't seem like it has to be ninja-ey.
I don't like the pocket clip- it gets in the way of the button for the flathead and gets in the way for the OH opening stud for the saw. I know, who the hell needs a one handed opening saw? You are exactly right- plus the saw could be about a quarter inch longer. The up side of the pocket clip is that it's removable. It comes off easily with a couple of teeny Torx bits. It's not reversable though, but then this thing isn't really lefty friendly anyway, so I doubt that matters much. I'll probably take the clip off mine since it also gets in the way in the sheath. I tried sstuffing it clip and all into the sheath and it didn't really fit, so I've been clipping it to the sheath, but then the clip gets in the way of the flap closing... although you don't really need the flap to close because that clip isn't letting the tool go anywhere.
One neat thing about this tool is that there really is no wasted space. At first it kind of seems like the XTract with bits and pieces sticking out all over, but unlike the XTract this one makes use of all the space. On the two bolster sides are One Piece Tool type wrench cutouts which are really cool in their own right, but extra so because both sides are also cut to work as bottle openers. I bought a 6 pack of Corona on my way home tonight specifically for testing! Apparently there's some kind of technique involved since the first one didn't come off so cleanly, but I promise you I will keep trying!
The only other exposed piece (the pocket clip covers 1/4 of the tool, each wrench covers 1/4 of the tool) has holes drilled in it for wire cutting/stripping. Personally I don't strip enough wire to need such a thing, and after trying the SOG Kill-A-Whut? I found I am really not fond of this kind of stripper. Of course, someone who knows what they are doing with electricity may feel differently.
All in all it seems like a pretty neat tool, but I'll have to carry and use it some to see what it can do. I see it more as a companion tool than a standalone, but if you really don't feel you'd miss the pliers then maybe this might be of interest to you.
Oh, and the blade is One Handed Opening and locks open so I guess it won't be a huge hit in Europe or Oz. :ahhh
Def
-
Thanks for the insight mate. Can we have a size perspective please?

-
It's about that big by yay wide....
Seriously I'll get some comparison pics up tomorrow when the light is better but it's about the same length as a PST or Spirit if that helps.
The saw is about the same length as that of a Juice, and it's dimensions are surprisingly close to that of the Gerber Fit for the three or so of you that have one of those! :P
Def
-
@Grant Lamontagne said:
It's about that big by yay wide....Seriously I'll get some comparison pics up tomorrow when the light is better but it's about the same length as a PST or Spirit if that helps.
The saw is about the same length as that of a Juice, and it's dimensions are surprisingly close to that of the Gerber Fit for the three or so of you that have one of those! :P
Def
I'm one of them :D :D
I'll take a look at that tonight to get a perspective
-
Just uploading the pics now... hang in there! :D
Def
-
Here's a pile of pictures now- I need to do a couple of things around the house then take Daisy to the park before I can go kayaking, so I'm trying to hurry up a bit!
Ask questions and I'll do my best to answer when I get home! :D
Oh, and for the record, the Octane is out of my work vest and the CRKT Tool is going in!
Def
-
Cheers Grant .... how big is a Crunch?

-
I got my "Tool" in the post yesterday and have had a little play already. First thoughts are pretty much the same as Grant's; poor pocket clip, nice blade, fun screwdrivers. I've also just tried the saw on a piece of pine dowel and it works fine. My only slight niggle is that the liners, locks and tools feel a little roughly finished. On the up side this is the first tool I have owned with TWO bottle openers. :D
-
That just means it's twice as good as any other tool! After all, if bottle openers weren't so important, why would every tool have them? :D
Def
-
Ya I bought one and wasnt too impressed with the fit and finish. The philips head on mine wasn't even properly formed. My biggest issues where poor steel, poor finish, large voids of wasted space in the tool, limited utility of T shaped drivers and awkward overall shape. The switchblade drivers on each side were the most fun part of the tool, but one of mine would get stuck 50% of the time.
It didnt make the cut for my MT drawer and I threw it on ebay and got 15 for it, which I think is about what its worth.
It looked neat in the pictures though... oh well.

-
Not had any issue with the drivers locking open on mine I am happy to say.
-
@Syph007 said:
Ya I bought one and wasnt too impressed with the fit and finish. The philips head on mine wasn't even properly formed. My biggest issues where poor steel, poor finish, large voids of wasted space in the tool, limited utility of T shaped drivers and awkward overall shape. The switchblade drivers on each side were the most fun part of the tool, but one of mine would get stuck 50% of the time.It didnt make the cut for my MT drawer and I threw it on ebay and got 15 for it, which I think is about what its worth.
It looked neat in the pictures though... oh well.

That sounds like you got a bad one- I haven't had any of those issues with mine. I would have seriously considered contacting CRKT about a replacement for it since it was obviously defective.
Def
-
@Grant Lamontagne said:
Ya I bought one and wasnt too impressed with the fit and finish. The philips head on mine wasn't even properly formed. My biggest issues where poor steel, poor finish, large voids of wasted space in the tool, limited utility of T shaped drivers and awkward overall shape. The switchblade drivers on each side were the most fun part of the tool, but one of mine would get stuck 50% of the time.
It didnt make the cut for my MT drawer and I threw it on ebay and got 15 for it, which I think is about what its worth.
It looked neat in the pictures though... oh well.

That sounds like you got a bad one- I haven't had any of those issues with mine. I would have seriously considered contacting CRKT about a replacement for it since it was obviously defective.
Def
I would have if it was a keeper for me, but the problem with non plier based tools is the lack of pliers! :D I thought of leaving it in my car, but ive got tools there already, and im more covered really with a standard MT and crescent wrench. I really only bought it to satisfy my curiosity, and I didn't pay much for it anyhow.
-
Yeah, I don't know where they get off making non plier based tools without pliers.... what were they thinking?

Def
-
Gave the wire stripper holes a go this afternoon and, while a little bit fiddly, did the job well enough.

-
I don't really like the "hole in the body then fold the knife blade" type strippers. I just roll the wire gently between my thumb and the blade until I cut all the way around.
I find all of these hold type strippers just too fiddly, not just this one.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login