Gerber Fan Club.
-
I was finally able to track one of these. :D


-
...thought i´d share my EDC MT. I´v started some 15 years ago with a Gerber Multiplier, upgraded to a MP 600 a few years later when i received a new tool after sending mine in for sharpening.
after this one got stolen i bought this BO MP600.
Bad pic of a great tool. I added the Mini Prybar to teh sheath about 2 years ago, and it´s a good addidtion.
I tried to betray the MP 600 a few times. Bought and sold a Skeletool (to light, tools missing).
Tried a Swisstool. Hm. Very well made, but not my used to tool and very heavy.
In the last weeks i EDCed a Spirit, which i find very nice although it could be a bit bigger.Yesterday i made a MP 600 with Remgrit/saw coupler, scissors and a Bluntnose with Carbide cutters out of 2 different MP 600s i bought - We´ll see if it will be my new EDC.
-
That's a tool that has seen some action.
Pics are obligatory of any Gerber PM600 mods BTW.
;) :D -
Reckon that`s a fine looking BO MP600 lowtech.
:) -
Thanks guys. I do use my tools. Tools i don´t use usually get sold or given away. so my MP 600 has seen some service.
As requested, here is a pic of my "Mod" which basically was only a Plier head change.
I took the head of a regular MP 600 with carbide cutters and implanted it on the once Needlenosed MP 600 with the Remgrit/saw coupler and scissors.
Second pic is of the donor ith it´s new needlenose to compare tool configuration. Note the broken file.


-
They did actually do a version of the MP600 with that configuration, but it seems to be very uncommon.

I picked one up a couple of months ago without realising it was anything odd. Very good version of the PM600 IMO.

-
I was kinda sure that this version must have existed, but could not get my hands on one.
I only came to love scissors when EDCing my Spirit for the last weeks, so it seemed a nice addition, just like the saw - you don´t need it often, but when you need it 2 knife blades won´t help.I am asking myself if i do miss the big flat screwdriver and what tool i would leavo out instead - maybe the can opener. If going outdoors I´d carry another tool setup anyways.
And i´m thinking about how to implement something like the chisel/wirestripper - it´s a very nice tool on the spirit.
Oh, how teh Swiss folks have spoilt me - i have been lucky with Mr. Pinchy and the MP 600 for 15 years....
-
Well, much as I like the scraper/wire stripper of the Spirit, it's not a tool I use very often and I don't miss it all that much when I'm not carrying it.
I do agree that the can opener can be more than a little redundant most of the time though and it would be nice to see more models with other features in their place.
-
And, as I'm posting in the Gerber fan club, I'm happy to say that my MT choice for today was my modified MP400. :)

Note the lack of can opener. ;)
-
...what i noted was the presence of the awl. I remember my first, non locking MP to have a pretty massive awl/spike thet more than once folded in while using it... Ouch.
The scraper/ stripper is nice as i work as a janitor and constantly fight stickers or sticky stuff on different surfaces and the scraper gets them off fine.
And not to bore you to death, a little pic of My old EDC, the BO MP 600, The new Bluntnose and the donor of the Blunt-, now a needlenose.

-
I've seen the awl on the Multiplier, it's a beast. :) The awl on mine came from a MP600 Sportsman.

IIRC it can also be seen on the Fisherman.
-
I just received my first Gerber ever (I'm not counting my Shard & Artifact).
I found it for $12 + free shipping.

-
@Gareth said:
These pics have already appeared in the mod squad section but I thought they'd fit nicely here as well. My modified MP400 (now known as the MP475 ;)).
Dropped the knife blade to make room for the file and dropped the can opener in favour of the awl. Now the awl is a tool Gerber should really offer on more MT's, it's a very handy tool. :)
Also did a little blade swap on my MP450 as I never really warmed to the Wharncliffe blade shape.

My Gerber's have really pushed a lot of my other MT's to the back of the drawer, the sliding pliers and tool selection just work very well for me ATM. :)
Well, thanks to Dunc's inspiration, I've got an additional feature added to my MP475.
-
Glad to be of service
and thank you for giving me an idea too :D -
Gareth what kind of thread lock if any do you use ?
-
For the MP475 I've not got any on ATM. Despite lots of use I've not had an issue with the pivots loosening up so I'm not running out to add any.
-
Gareth that looks like a good set up for the 400.
:) -
Cheers folks.

Also realised that I'd not put up any pics of my Balance in this thread.




-
Now I want one of those too :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login