And so it begins.... (My adventures into Alox!)
-
@nj2656 said:
You really got me thinking now. Would a 93 awl fit in a cadet to make a small urban pioneer?Somewhere a few pages back in this thread I have a picture of the awl on an 84. It doesnt fit well, but I think if I reprofiled the part that engages the spring to be narrower to match the smaller 84mm toolset then yes it should fit just right.
-
I'm also really digging the Cadet with Scissors.

-
I didn't think that I came up with that on my own. I looked back at it that is what I was remembering. What about an Electrician blade in place of a can opener? Maybe with a thumb stud to use for quick opening all the mod packages coming to my hose from Canada.
-
@nj2656 said:
I didn't think that I came up with that on my own. I looked back at it that is what I was remembering. What about an Electrician blade in place of a can opener? Maybe with a thumb stud to use for quick opening all the mod packages coming to my hose from Canada.Oh thats a nice idea too! :D Too many good things to try and not enough time! :D
-
Quick update to my super cadet (what would the proper name be anyhow, cadet plus?). I didnt like the first type of screws I used so I ground down some countersink ones and got those to fit nice. Looks better I think :D


-
Springs! :ahhh
Hot off the laser, 222 custom springs for scissors or pliers depending on how thick they're ground and how high that little rest bump is ground down. They're looking pretty gnarly now but they'll have it even worse once they get into the heat treat oven. They'll be tempered to around 45 Rc and then on to be surface ground to 2 different thicknesses Each one will be hand fitted and polished as it gets installed.

As compared to a Solo spring. Plenty of extra meat on the rest riser to be ground down to the perfect height as each one gets hand fitted. Same with the ramp. Notice how they slope up from the center pivot to the working end so the thumb lever of the scissors or pliers can slide right up that ramp and close gently as they snap shut rather than hitting that bump like on the blade and saw springs we've been using.

Soon there will be no more buying 2 Farmers to get the saw springs for pliers or a Pioneer or Solo to get a blade spring for scissors. We want to make these mods as affordable as possible so everybody can enjoy one. :D
-

You have no idea how nice it is to see a part I designed on the computer exist in real life. Looks perfect. That 440 will polish up beautiful after its hardened and I cant wait to get my hands on those beauties. :D
-
Syph you are killing me mate :ahhh :ahhh

The 007 Cadet is 8) 8) 8), small blade instead of the can opener
:D.Add brass liners & I am a dribbling wreck :ahhh :D :DI wonder what my tax return check will be
:D.That is a LOT of springs, I can not wait to see what beauties get made with them 8) 8) , well done fellas

-
I'm starting to really dig the Cadet too. School me on the tools. Do they have the same can opener as 91 and 93 with a 91 cap lifter or their own size cap lifter? Their own size blade or are they squeezing a 91 blade in there? I know Vic likes to make as few parts as possible and I'm wondering how many are exclusive to the 84mm size.
007 Cadet :D
It should have a tracking device, a laser and a magnet for deflecting bullets.I swear someday I'm going to make this thing real,

It looks like it already has my titanium magnifying glass.
-
The 84's do have their own custom size blade and openers. Just slightly smaller and thinner than the 91's. 007 Cadet! I like that!
-
@Syph007 said:
Quick update to my super cadet (what would the proper name be anyhow, cadet plus?). I didnt like the first type of screws I used so I ground down some countersink ones and got those to fit nice. Looks better I think :D

Beauty!!

You don't know how long people have been dreaming for a model like this.
Now let's make that can-opener and nail-file just a bit more useful, and maybe a touch of brass for a touch class. :D

-
@bushidomosquito said:
Springs! :ahhhHot off the laser, 222 custom springs for scissors or pliers depending on how thick they're ground and how high that little rest bump is ground down. They're looking pretty gnarly now but they'll have it even worse once they get into the heat treat oven. They'll be tempered to around 45 Rc and then on to be surface ground to 2 different thicknesses Each one will be hand fitted and polished as it gets installed.

As compared to a Solo spring. Plenty of extra meat on the rest riser to be ground down to the perfect height as each one gets hand fitted. Same with the ramp. Notice how they slope up from the center pivot to the working end so the thumb lever of the scissors or pliers can slide right up that ramp and close gently as they snap shut rather than hitting that bump like on the blade and saw springs we've been using.

Soon there will be no more buying 2 Farmers to get the saw springs for pliers or a Pioneer or Solo to get a blade spring for scissors. We want to make these mods as affordable as possible so everybody can enjoy one. :D
That really is :ahhh

I can see some great mods in the near future from these. SAK modding is having an awakening; less sacrifices and more enlightenment.
-
How exciting :D
Beautiful things and springs to make more... big smile here!
-
I love coming here to this thread. It's always a
moment when you two post pics. I like the part of making these mods more affordable too. 
-
@MultiMat said:
Syph you are killing me mate :ahhh :ahhhThe 007 Cadet is 8) 8) 8), small blade instead of the can opener
:D.Add brass liners & I am a dribbling wreck :ahhh :D :DThe small blade should fit there, I'd have to test to be certain though. I'm working on making up some brass liners tonight. I just have to make a template for the liner pattern as I haven't made any by hand yet. I'll do my best to make you into the dribbling wreck I promise! LOL :D
-
Syph you are killing me mate :ahhh :ahhh
The 007 Cadet is 8) 8) 8), small blade instead of the can opener
:D.Add brass liners & I am a dribbling wreck :ahhh :D :DThe small blade should fit there, I'd have to test to be certain though. I'm working on making up some brass liners tonight. I just have to make a template for the liner pattern as I haven't made any by hand yet. I'll do my best to make you into the dribbling wreck I promise! LOL :D
The small blade fits ;)
-
wow! thats a lot of springs ! :ahhh
-
@Sidhartha said:
wow! thats a lot of springs ! :ahhhI bought a 6 ft long by 6 inch wide piece of 440c blade steel and thats how many the laser cut out of that piece. :D I figured in the cost and it only made sense to do this if we did a bunch at once so I just went for it. Soooo... kind really hoping it works out well in the end and my fingers are crossed. :D
-
I just had a thought how you could solve the rare 84mm Vic scissors problem.
Now that you two have the capability to make your own backsprings, why not make them a bit longer on the working end and solve the problem with the Wenger 85mm scissors compatibility? The problem for putting Wenger scissors into a Vic frame was that the Wenger spring did not fit cause of the middle pin and the Victorinox spring was too short, as the Wenger scissors have a longer shaft/cut out on the back end.
If you are making your own springs, you could just make that end longer and make the dream of a Vic SAK with Wenger scissors reality. :D The pivot hole on the Wenger is a bit larger, but you're drilling the pivot out anyway for the screws, right?
Did I ever mention I love Wenger scissors?





Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login