SuperJuice KFS4
-
He's probably already posted it to me

-
Not quite ready for pictures yet....
-
I can't wait to see the finished product, with the custom titanium scales and OHO blade. But personally, I just hope he figured out the pivot pin thang, I've got a Juice Pro that really REALLY wants to shed a layer, and those aluminum scales. :D
-
@J-sews said:
Made some definite progress today, but in the end it fell just short of the goal. :-\ And for such a silly reason too..... :PThe whole story:
I finished machining the backsides of the scales this morning, which went much easier than anticipated. :) Then came assembly time!
Yay, this ought to be fun, right? WRONG! :P After spending over an hour fighting The Battle Of The Backsprings, it was back to the shop to make a little assembly jig. Then things were proceeding nicely again, until it became apparent that my pivot screws are too short. :'( The ones I bought from www.knifekits.com are one half inch long:
Unfortunately, it appears they need to be just a little bit longer. :( These are already the longest ones knifekits sells, so I'll have to make my own. :(
In the mean time though, I was able to assemble up the first layer and the pliers layer, just to get a feel for it. Here's a few pics. (keep in mind there are no back scales in place yet)


Showing cap screw being used as thumb stud

Pliers deployed

Screwdrivers

Special blade load out for Mike LOTS :D


Are those the 1/8" diameter pins? How long do you need them to be? I splice then together regularly for the thicker SAKs with either a 1/2" screw through the short one and halfway into the long one or a tiny stud right in the middle and plenty of loctite. Might save you having to make brass ones.
-
@bushidomosquito said:
Are those the 1/8" diameter pins? How long do you need them to be? I splice then together regularly for the thicker SAKs with either a 1/2" screw through the short one and halfway into the long one or a tiny stud right in the middle and plenty of loctite. Might save you having to make brass ones.IIRC he said they were 5/32" or 0.156".
Your idea sounds interesting; one complication is the way the Juice uses multiple thin backsprings, pretty much guaranteeing that at least one will be right on the joint in the middle of the pin!
-
Juice uses 1/8 pins. The splice should work depending on how much more than 0.5 inch you need.
-
Did I miss the big reveal? What happened to this project? ???
-
I own one of Bobs mods and perfection takes time..
Lots of time apparently.. ;) :D -
Some things are definitely worth waiting for

-
OK everybody, let's see if we can break the record for most pokey sticks in a row.
Ready? GO!
-
I'll assist.

And make an offer... Bob if you give me exact length dimension for the pivots I'll send you some spliced ones ready to install. :D
-
ahh 2 lol -
Pokitty pokitty pokey poke poke!

-
Bob's pretty busy with real life atm afaik, so there's gonna be quite a bit :poking: going on I think.. :D :D
-
Why does life always get in the way of the fun stuff?! ::)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login