Maxpedition EDC Organiser Owners Club
-
:D :D
-
OH DID I FORGET SOME PEPPER SPRAY OR A STUN GUN?
HAHAHA@Gabriel80 said:
ULTIMATE TACTICAL MALL NINJA MAXPEDITiON ORGANIZER!Just playing around, this isn't my EDC by any means.! ;)

(LEFT TO RIGHT)
SMITH & WESSON TACTICAL PEN
CHINESE THROWING SPIKES
SWITCH BLADE
BRASS KNUCKLES
RAVEN .25 AUTO
4 POINT NINJA SHURIKEN (CHINESE THROWING STAR) (POUCH IN BACK)

-
Talk about über prepared.. :D
-

Welcome again to the loony bin, I'm sure you'll fit in just fine :D

-
@Gabriel80 said:
ULTIMATE TACTICAL MALL NINJA MAXPEDITiON ORGANIZER!Just playing around, this isn't my EDC by any means.! ;)

(LEFT TO RIGHT)
SMITH & WESSON TACTICAL PEN
CHINESE THROWING SPIKES
SWITCH BLADE
BRASS KNUCKLES
RAVEN .25 AUTO
4 POINT NINJA SHURIKEN (CHINESE THROWING STAR) (POUCH IN BACK)


i thought that was a colt pocket 25 at first glance, what pistol is it

-
yeah what pistol?
-
@New_World said:
yeah what pistol?I googled it :D phoenix arms from ontario
i was close with 25cal :Dthen noticed you wrote the make lol, raven mp-25

Phoenix Arms .25 Auto -
@New_World said:
yeah what pistol?Yes it's a RAVEN .25 cal AUTO PISTOL. In the 1980's millions were sold, usually for around $50-75. The pistol was originally made by a company RAVEN ARMS but later produced by PHOENIX ARMS (still being called the RAVEN)
It's basically a "belly gun" or also called a "junk gun" or a "Saturday Night Special" The U.S. Government hated the gun because it was so cheap, it made it readily available to criminals (pimps and hoes) You could pull the gun out of your pockets, hold it to someones stomach, shoot it, and then throw the damn thing in the garbage because it wasn't that expensive (and is now evidence) Ha! The Raven .25 has been out of production since 1993 and now you can get one on the secondary market for anywhere from $75-$150.
But basically it's a real piece of sh*t, nothing you could trust you life on. I bought it for curiosity sake, it's fun to shoot but I would never really carry that thing.
If you want an awesome pistol (that fits even better in the MaxPed) check out the RUGER LCP .380 it's a newer pistol, still in production, selling like crazy and shoots a bullet 10 times bigger than the raven, plus it weights only 13oz since the frame is polymer!

-
I have over 100 tools in this experimental tool kit and keep in mind this is the Maxpedition MICRO pocket organizer, so there's a lot less room to work with! 8)

-
Cool. Can you explode it for us?
-
@mzil said:
I have over 100 tools in this experimental tool kit and keep in mind this is the Maxpedition MICRO pocket organizer, so there's a lot less room to work with! 8)I enjoyed your Youtube video which explained the contents. Good work!
Micro Pocket Organizer Tool Kit 100 Items for Car, Work, or EDC Bag!
-
NOW I WANT A MAXPED MICRO TOO!
Cool video!
-
Maxped Fatty ..

-
Cool. Can you explode it for us?
tick, tick, tick, KA-BOOM:
[I have no formal, written list of the 100+ items, but I name them all in that video posted earlier.]
You have a needle but you forgot thread
(unless you count the strings in the paracord, but I prefer regular thread) Awesome setup, I especially liked the positioning of the cable ties, never occurred to me to try shoving something in there. 
Another thing is that Key Tool bit driver. Is it plastic? Will it take a lot of torque without flexing? I recently got a Chapman mini ratchet. It's really small but very useful and would hardly take up any space in your kit. Here's a review of it over on EDCF by xbanker.
-
You have a lot of useful stuff crammed in to a small space there

Thanks for the pic :)
-
@enki_ck said:
You have a needle but you forgot thread
(unless you count the strings in the paracord, but I prefer regular thread) Awesome setup, I especially liked the positioning of the cable ties, never occurred to me to try shoving something in there. 
Another thing is that Key Tool bit driver. Is it plastic? Will it take a lot of torque without flexing? I recently got a Chapman mini ratchet. It's really small but very useful and would hardly take up any space in your kit. Here's a review of it over on EDCF by xbanker.
Good point about the missing thread. To tell you the truth, I don't keep a needle and thread even in my giant tool box either, and rarely sew, but it certainly could come in handy.
The needle lives in the spine of my Maxped(s) permanently, next to the safety pin, regardless of kit design or purpose. [This is why both of them didn't make it to the exploded photo shown in the video, however I did extract them for the photo I posted here in the thread].
In my survival based kits I usually keep a spool of dental floss as my thread (extremely strong stuff) or, as you mention, can use the paracord inner strands which themselves breakdown into even thinner sub units, BTW.
The Key Tool is plastic but strong. It was chosen because it is the tiniest design I have and I prefer it with the Leatherman bit extender over the County Comm EDC-Key Screwdriver which is analogous, but doesn't have a "stubby" length mode capability using the bit alone, without the extension, like the Key Tool *does * without the Leatherman part, for really tight spaces.
This kit was just an experiment, I don't use this as an EDC bag, but a ratcheting design like you suggest might be a better bet. If I were to have one I would only consider ones with a conventional bit holder option at the end for tight spaces, where you don't have the room to be swinging a ratchet handle around. I bought a Rocket Ratchet that has that feature.https://www.google.com/search?hl=en&safe=off&q=rocket+ratchet&bav=on.2,or.r_gc.r_pw.r_qf.&biw=1117&bih=550&wrapid=tlif134421537394610&um=1&ie=UTF-8&tbm=isch&source=og&sa=N&tab=wi&ei=YBkfUMuFHsry0gGY24DQCQ
[Further rant]: This "no room to be swinging a handle around" problem is also why my kit has a real adjustable wrench, which in a pinch can even attack a nut/bolt at a right angle, instead of the ubiquitous multi-position V-opening mouths of many pocket tools like the Pocket Wrench II , etc, which assume the nut is free and clear on a top surface and not recessed down a hole/valley or at a right angle to a surface (like the side bolts on many car battery posts).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

