And so it begins.... (My adventures into Alox!)
-
Not sure if you've seen it or not but on the old SOSAK site Scibeer did a mod on an phillips. Not sure all the details but there were lots of pics. Maybe of use. I will be contacting you in the near future for a a Cadet with that mod plus the 93 awl and 91 scissors. Work out all the bugs cause I can't wait.

I'll have to take a look. The only mod I've seen so far with a philips on a cadet was this one.
Getting the philips on the bigger 93mm frame works no problem, but on the 84mm it's much trickier.
Here's the link to Scibeer's 84mm special including Phillips screwdriver. http://www.sosakonline.com/index.php?option=com_content&task=view&id=220&Itemid=35
Great looking mod BTW Syph. 8)
-
Not sure if you've seen it or not but on the old SOSAK site Scibeer did a mod on an phillips. Not sure all the details but there were lots of pics. Maybe of use. I will be contacting you in the near future for a a Cadet with that mod plus the 93 awl and 91 scissors. Work out all the bugs cause I can't wait.

I'll have to take a look. The only mod I've seen so far with a philips on a cadet was this one.
Getting the philips on the bigger 93mm frame works no problem, but on the 84mm it's much trickier.
Here's the link to Scibeer's 84mm special including Phillips screwdriver. http://www.sosakonline.com/index.php?option=com_content&task=view&id=220&Itemid=35
Great looking mod BTW Syph. 8)
Oh awesome thanks for the link.

-
She sure looks nice with brass liners!

The Scibeer mod looks really good too. Looks like he end up with more material for a stronger driver. The magnifier must be slightly shorter, or is there another reason?
-
This latest experiment is gonna be great

As for that Scibeer link - been a while since I've seen it - genius

-
@ICanFixThat said:
She sure looks nice with brass liners!

The Scibeer mod looks really good too. Looks like he end up with more material for a stronger driver. The magnifier must be slightly shorter, or is there another reason?
Yep I was just comparing the two parts, the magnifier is about 1/4 inch shorter than the cap lifter so pairing the Philips with that you get to keep more metal.
The only think I don't like about his mod was not using a wide enough backspring. It's a pet peeve of mine to have components thicker than backsprings so there are gaps in the back. Also he should have put a bushing on the mag glass, he may have but it doesnt say. It probably doenst matter, but its another thing that bugs me if the pivot holes are too big for the pivots.
Also I dunno about heating the part to drill it, that feels wrong to me too. Maybe back then carbide bits cost alot? I get them for about 5 bucks when I buy them in packs. The older vic steel is softer than modern too, and I have no issues popping a hole through the fully tempered part, its a 5 second job.
-
No doubt things can always be improved - it's the body of work that counts

Between you all, some lovely things have been created.
-
Ya I like looking at the evolution of the modding techniques as much as looking at the evolution of the Victorinox manufacturing and tools themselves.
It's a good way to realize even the "simple pocket knife" is not so simple if you really study it. They sure got a big break from nature though with the development of corrosion resistent metals.
-
I finished getting this 3 layer cadet together. No keyring, smooth all the way around. I'm still in love with the brass liners so I will for sure keep making up some more of these.



I was proud of this part. This is the scissor spring from the 91 that I cut down and fit so it's two separate parts. I got it nice and contoured to the scale this time so all you see is that tiny line between the two parts. The next best solution here is the original 84 mm scissor spring or making a custom one.




-
Brilliant

-
@Syph007 said:
I finished getting this 3 layer cadet together. No keyring, smooth all the way around. I'm still in love with the brass liners so I will for sure keep making up some more of these.....

....
I was proud of this part. This is the scissor spring from the 91 that I cut down and fit so it's two separate parts. I got it nice and contoured to the scale this time so all you see is that tiny line between the two parts. The next best solution here is the original 84 mm scissor spring or making a custom one.
....
OMG! Absolutely Fantastic!!

-
Mate that looks
& what a great tool set 8)

-
very sexy!!!

-
I would love to see that with an awl. -
The PERFECT tool set. What a beauty

-
So great!
Can't wait for my Pioneer, hehe. -
Gratz for pulling this off Syph, it's a winner.

-
@Syph007 said:
Also I dunno about heating the part to drill it, that feels wrong to me too. Maybe back then carbide bits cost alot? I get them for about 5 bucks when I buy them in packs. The older vic steel is softer than modern too, and I have no issues popping a hole through the fully tempered part, its a 5 second job.As a follow up to what I said earlier. I took a vid of me drilling through a backspring with a carbide bit, and I think it's pretty much a 5 second (ok maybe 7 seconds :D) drilling job. Jobs are always easier when you have the right tools. These spade bits are $11 but I can do at least 100 parts with one. I have some cheaper ones that were $5 each.
-
Excellent job, mate

I need to buy some Alox Cadet or Bantam
-
Syph007, any news on the custom 93mm scissor springs?
Last i heard they were going for heat treating. -
@heardrwt said:
Syph007, any news on the custom 93mm scissor springs?
Last i heard they were going for heat treating.I got confirmation that they made it through heat treat. I don know if they've been shipped back to Bushido yet. He has to get them surface ground locally, and then they'll be on their way to me! :D He sent me a raw cut one to test fit and they will work just fine so Im anxious to get these in!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login