MT Glass Breaker
-
@angusW said:
If ya gotta break a window remember to do it in one of the corners, not in the middle of the window. Believe me. It won't work.Wasn't there a story on the Leatherman site in the "Tool Tale" section about a guy who used his wave to break a window?
O yeah, really? I didn't know that! I always thought that it would be easier to break
the window glass in the center in cases of emergency! Thanks for the tip. ;) -
If the situation is severe enough I'm pretty certain no hunk of glass is going to keep you in no matter what tool you have.
Def
Sent from my MB860 using Tapatalk 2
-
Here's an idea I've been entertaining, get a piece of carbide drill bit/scribe, about same size as a key and sharpen the tip to a 90° point, attach to keychain. If situation warrants put the point to the glass and use whatever object you have such as your MT as a hammer to punch through glass. It's small enough that you probably won't even notice till needed.
I ended up just buying a res-q-me and put on my car keys instead, there's also Boker's vox titanium pry bar that has a glass breaker on end.
-
I'd just carry a resqme. They're great.

-
I tested a Victorinox reamer and phillips driver (bound with string so as not to close on my (gloved) fingers) on a car window, striking about as hard as I could, and the tip of each dulled/bent without breaking the glass. The side glass just scratched, the front laminated glass cracked without breaking. The reamer and driver are only hardness 52.
Saw an online video of breaking a car window easily with the ceramic of a broken spark plug.
I dont' have any more cars to damage so I hope somebody can do some actual tests with multitools, RescueTool, automobile escape tools and let us know. -
It is important to strike the glass in a corner , the centre will just absorb the shock.
-
I did Firefighting / EMT work for a while, and I've broken windows in the military. Any MT will work. Open to reveal the pliers, hold the tool upside down (needlenose points facing down) and "stab" the window. Even the cheap Ozark Trail (WalMart brand) tools will work. Make sure you do it in one of the bottom corners.
-
If there's no tools handy you could always do the acoustic/harmonic self shattering thing where you wet your finger and run it round the rim of an opera singer ... or something

However, I might be getting my educational videos confused slightly

-
Just replace the guiderod on your GLOCK with one of these:
-
A small, cheap $5, automatic center punch in your edc?
Just don't carry one in the UK, you will then be 'going equipped' sheesh!
-
Hm, I wonder how the 93 mm Vic reamer would work? (Apart from the obvious potential for a lot of pain if the reamer closes on a finger, it still beats drowning/suffocation/burning to death. Sort of a given...)
-
If you are inside the vehicle you probably don't have the space or not in a position to swing hard, which is the idea behind spring loaded breakers.
What struck me was an news article of a family drove into the water, all drowned. When the rescuer fished their car out of the water pretty much everything they had was smashed in attempt to unsuccessfully break the window, including their cellphones. After that I always keep a spring loaded window breaker either in vehicle or on keys.
Just two weeks ago there was another news article on a man drowned inside his car and a woman in a bus because they couldn't break the window during a rain flood.
-
@jzmtl said:
If you are inside the vehicle you probably don't have the space or not in a position to swing hard, which is the idea behind spring loaded breakers.Seems like a very good point, also it is nice with stuff which doesn't require much coordination, since I assume I would panic in such a scenario.
-
In a situation like a bus, even if you don't panic, everyone around you will be making things very difficult.
Def
-
@Steinar said:
Hm, I wonder how the 93 mm Vic reamer would work? (Apart from the obvious potential for a lot of pain if the reamer closes on a finger, it still beats drowning/suffocation/burning to death. Sort of a given...)The last post on page 1 of this thread was about the test of a reamer on a 91 mm Vic. The reamer was bound figure-8-wise with a cord (like a shoe-string) to hold it open and it did not close on my fingers. I did wear a leather glove just in case. It is true I hit in the center of the window and not at a corner. Wish I had some more car windows to test other tools on...
-
@J Mackrel Jones said:
Hm, I wonder how the 93 mm Vic reamer would work? (Apart from the obvious potential for a lot of pain if the reamer closes on a finger, it still beats drowning/suffocation/burning to death. Sort of a given...)
The last post on page 1 of this thread was about the test of a reamer on a 91 mm Vic. The reamer was bound figure-8-wise with a cord (like a shoe-string) to hold it open and it did not close on my fingers. I did wear a leather glove just in case. It is true I hit in the center of the window and not at a corner. Wish I had some more car windows to test other tools on...
I was aware of that. The reason I though of the 93 mm was that it might be fine for that stabbing motion JNieporte recommended.
-
The city bus around here are like car windows, long distance are double layered. However some have plastic (polycarbonate?) windows, I'd imagine those aren't going to be easy to break.
-
With a plier-based MT I would be willing to take a swinging blow at the window corner. If I had to use a non-locking reamer,phillips, etc. on the back of your typical SAK, I wouldn't try to punch the window. Instead, place the point in the corner of the window and PRESS with your full body weight behind it. This has worked for me, even underwater. (We were doing a recovery dive on a submerged vehicle). It is NOT easy, but likely your best chance.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





