Leatherman OHT
-
I read somewhere it has to do with a common statement from deployed soldiers, goes something like this:
"Yea, I'd like to use a Leatherman, but I need pliers that flick..."
Funny, I can "flick" my Leatherman Charge Pliers just fine.
I think the point is being able to do it without opening the tool...
-
@Scott86 said:
The problem with the OHT is it has so much wasted space..
Quick and dirty image to show(light blue = wasted space):

That "wasted space" is occupied by the plier head when it's slid down into the handle.
That type of mechanism takes up a lot of room. That's why Gerber tools typically have stubby little implements, too.
-
@50ft-trad said:
...but it still seems a little off field if they haven't already secured an "in" with a military client... would Leatherman produce a GAK "style" tool unless they got the official order? Doubt it...Leatherman must have spent a shed load of money tooling up for this...
Three valid points that really make me think that they are building this "to order" for someone.
We do know that they have recently been prototyping for the Indian Army...For sure, since most of the pix and catalog images are all the BO version too. That hints military to me.
-
@Gryffin said:
That "wasted space" is occupied by the plier head when it's slid down into the handle.That type of mechanism takes up a lot of room. That's why Gerber tools typically have stubby little implements, too.
The red above the blue is where i assumed the pliers sat when they were retracted(like where the 600/diesel/flik/whatever ones sit in gerbers)
If it slides all the way down to the bottom, than i dont see why you're clever use of quotes is necessary, since it TRULY is wasted space. You yourself say its where gerbers stubby tools would go, but if the OHT slides that low there would be no way to fit anything in there. -
@Scott86 said:
The red above the blue is where i assumed the pliers sat when they were retracted(like where the 600/diesel/flik/whatever ones sit in gerbers)The red is where the base of the plier head sit when extended. Like I said, that sort of mechanism takes up a lot of room; besides the plier jaws themselves, there's the pivot and the "base" that provides support and leverage, as well as the latch mechanism that locks the sliding mechanism into the deployed and stowed positions.
@Scott86 said:
If it slides all the way down to the bottom, than i dont see why you're clever use of quotes is necessary, since it TRULY is wasted space. You yourself say its where gerbers stubby tools would go, but if the OHT slides that low there would be no way to fit anything in there.I'm not trying to pick a fight here, just stating the obvious. If you look at the right-hand view in your photo, you can see the cut-out in the slot the plier head travels down: it's all the way at the bottom. There is no room for implements in the center channel.
In that respect, the original Gerber Multi-Plier design is a bit more space efficient, since the plier head doesn't retract as far, so there's room for a few stubby implements in that channel, along with a couple longer ones to either side.
-
@Snipe315 said:
Funny, I can "flick" my Leatherman Charge Pliers just fine.I've yet to find a multitool that I couldn't deploy with one hand. The only challenging one was the LM Crunch, which took a bit of practice, but it can be done.
For most, all you need to do is catch the end of one handle on a pants seam, the edge of a pocket, whatever, and separate the handles. Easy peasy lemon squeezy.
-
Funny, I can "flick" my Leatherman Charge Pliers just fine.
I've yet to find a multitool that I couldn't deploy with one hand. The only challenging one was the LM Crunch, which took a bit of practice, but it can be done.
For most, all you need to do is catch the end of one handle on a pants seam, the edge of a pocket, whatever, and separate the handles. Easy peasy lemon squeezy.
I take your point, I have yet to find a MT that I couldn't open with one hand either. However I will say that the out-the-front system is much quicker and more convient in my experience.
I am not wild about the looks of the OHT myself but I will not write it off until someone actually has had a chance to put it through it's paces in the real world.
-
Although I like Leatherman tools, won;t be wasting my money on this as it is more gimmick than useful.
It has some interesting features here and there. It is a copy-cat from a Gerber, and a poor one at that. Might be great for a collector's item.
Since the Charge TTi there hasn't been a Leatherman worth buying. Myself I'd like to get my paws on another awl and a Wave pliers head to replace the wasted cap crimper jaws.
Might buy a Rebar some day, but would like to see one first. Was so disappointed in the quality of the Wingman. Leatherman seems to be going for cheap production methods and untested/untried models. They won't listen to what their customers want.
Here I thought Juli said Leatherman was sticking to what they knew. Seems like Leatherman is more interested in making toys, not tools.
These latest tools seem more gimmicky than reliable. Only exception maybe is the Z-Rex; am concerned about the handle area that holds the carbon striker for longevity & reliability.Leatherman was doing good with the Serac light line, and the K503 line of knives. Then something changed. Reliability, quality, and confidence have been slipping. OHT, meh, just another gimmicky wanna-be-something tool.
Sure hope they don't go after Exotac next.
-
Yeah, i have been let down by leatherman too. I shipped out some old tools from family that even after 10+ years of use, were solid and firm... Sure, there was rust and some broken parts from over(maybe even abusive) use. But they still felt like solid hardy tools.
The Supertool 300 i got as a replacement does not feel anywhere near as solid. If i shake it, i can hear the locks on both handles rattle and wiggle.And the quality of sheaths... wow. I received one of the original leatherman PST sheaths from ebay a few days ago and it really feels like a nice, expensive thing. My friend has a original wave with the leather sheath and it also feels and looks like a high end sheath. The new nylon ones dont feel like garbage, but there is a significant step down in quality. And the 'pancake' sheath they were using a few years ago? Man, that thing really is garbage. Cant comment on their current leather offerings, but from what i hear on this forum it isnt very good.
-
The only other decent sheath that Leatherman made (discontinued) was the leather Charge & Wave sheaths.
Only regret I have when had ordered an oval Charge badge leather sheath was not ordering two (or more). Good luck finding them anymore.
Have had to sew parts back together, and did sew the bottom hole closed with a leather patch. Bought a sewing awl for sheath upkeep.
Agree on the sandwich nylon sheath, not worth anything it was made from. The MOLLE might be okay but God are they ever noisy when you open one up. Give me a snap over a SSSCCCRRRRIIIIIIPPP any day. Least I can muffle the snap, and no issues of lint plugging it up later with use.
-
@Xelkos said:
Although I like Leatherman tools, won;t be wasting my money on this as it is more gimmick than useful.It has some interesting features here and there. It is a copy-cat from a Gerber, and a poor one at that. Might be great for a collector's item.
Since the Charge TTi there hasn't been a Leatherman worth buying. Myself I'd like to get my paws on another awl and a Wave pliers head to replace the wasted cap crimper jaws.
Might buy a Rebar some day, but would like to see one first. Was so disappointed in the quality of the Wingman. Leatherman seems to be going for cheap production methods and untested/untried models. They won't listen to what their customers want.
Here I thought Juli said Leatherman was sticking to what they knew. Seems like Leatherman is more interested in making toys, not tools.
These latest tools seem more gimmicky than reliable. Only exception maybe is the Z-Rex; am concerned about the handle area that holds the carbon striker for longevity & reliability.Leatherman was doing good with the Serac light line, and the K503 line of knives. Then something changed. Reliability, quality, and confidence have been slipping. OHT, meh, just another gimmicky wanna-be-something tool.
Sure hope they don't go after Exotac next.
I would argue that Leatherman is listening to their customers.
-
I have heard many people (aka potential customers) say something along the lines of, "I'd love to get a Leatherman, but the Brand X multitools are so much cheaper!" Enter the Wingman and Sidekick. Yes, I agree with you that the build quality is not up to par with the Wave/Charge, but there's a difference between a premium tool and an entry-level tool.
-
Customers immediately loved the ST300 -- it was a huge hit. I have used and abused mine on many home/yard projects, yet it's hardly any worse for the wear. many fans of the ST300 clamored for the replaceable wire cutters on a full-size (4") tool -- hence the Rebar. (and FWIW, I'm very happy with the build quality of my Rebar; definitely sturdier than the Wingman/Sidekick.)
-
I am honestly not sure about the OHT; I probably won't be getting one either. Then again, I never got myself a MUT either. I can see instances where OHO pliers would be hugely beneficial, especially in military/LE applications. I'll reserve judgement on the OHT until I have a chance to play around with one.
-
Leatherman would put themselves out of business if they tried to put out a new premium tool and replace the Charge TTi every year or two. Keep in mind that a good chunk of Leatherman's customers have no desire to pay more for premium materials and/or tools.
That being said, I agree with you about the sheaths. I have 3 of the leather Charge sheaths, but I wish I would have bought 3 or 4 more.
-
-
@Breezy12 said:
4. Leatherman would put themselves out of business if they tried to put out a new premium tool and replace the Charge TTi every year or two. Keep in mind that a good chunk of Leatherman's customers have no desire to pay more for premium materials and/or tools.Have heard many Leatherman owners want the CM154/S30v steel blades over the cheap commonly-used 440C soft metals. Know a lot of have asked for better steel on the serrated blades too. Better steel holds an sharper edge longer.
Cheap steel is great for everyday rugged use, for newly introduced tools, and for affordability.
Yet once you buy a Leatherman are also getting a real 25 year warranty. So it comes down to what one wants from their tool, what the tool can do, and what the one can afford.As for on-board tools is where Leatherman doesn't listen. They instead make new tools with varying levels of quality with some of the ideas - yet lacking. Charge has 3 current models, 3 that were retired. AL/ALX offers pliers with or without a camp crimper, and single or double large bit drivers. None offer a version with an awl, something many Charge owners have been asking for many years.
Charge sales are still prominent, yet I would be curious to see how popular one with an awl w/ threadloop would hold up - I bet would be more popular with farmers, tradesfolk, & firefighters. Hopefully if this should ever happen would also be a non-cap-crimper option available. -
I will say that the vast, vast majority of Leatherman owners probably never ever come on-line and post about them. Weird I know, but there you have it. ;)
-
@Xelkos said:
I will say that the vast, vast majority of Leatherman owners probably never ever come on-line and post about them. Weird I know, but there you have it. ;)
Is strange, never knew about MTO until Juli (Lady Leatherman) told me about y'all. :D
We'll be sure to thank her for that the next time we talk
:D -
@Xelkos said:
- Leatherman would put themselves out of business if they tried to put out a new premium tool and replace the Charge TTi every year or two. Keep in mind that a good chunk of Leatherman's customers have no desire to pay more for premium materials and/or tools.
Have heard many Leatherman owners want the CM154/S30v steel blades over the cheap commonly-used 440C soft metals. Know a lot of have asked for better steel on the serrated blades too. Better steel holds an sharper edge longer.
Cheap steel is great for everyday rugged use, for newly introduced tools, and for affordability.
Yet once you buy a Leatherman are also getting a real 25 year warranty. So it comes down to what one wants from their tool, what the tool can do, and what the one can afford.As for on-board tools is where Leatherman doesn't listen. They instead make new tools with varying levels of quality with some of the ideas - yet lacking. Charge has 3 current models, 3 that were retired. AL/ALX offers pliers with or without a camp crimper, and single or double large bit drivers. None offer a version with an awl, something many Charge owners have been asking for many years.
Charge sales are still prominent, yet I would be curious to see how popular one with an awl w/ threadloop would hold up - I bet would be more popular with farmers, tradesfolk, & firefighters. Hopefully if this should ever happen would also be a non-cap-crimper option available.I'm sure there are many owners who prefer the premium steel; I know I do. I have 4 Charges -- a TTi, a Ti (my personal favorite), and two XTis (one of which was modded with the Rebar pliers). I also have several of the LM knives with the 154CM blades (the Expanse series and older k-series).
however, the Expanse series of knives was recently retired, presumably because LM was not making enough money from them, yet three models from the Crater series (which have 420HC blades) continue to be in production.
Leatherman has stated that their best-selling model by far is the Wave, which does not use any premium steel, and is more affordable than the Charge models.
I'm sure you're right that a Charge model with an awl would be popular among certain trades, and I agree that it would sell well... but not everyone wants an awl. It certainly wouldn't surprise me if Leatherman comes out with one in the next couple years.
@Gareth said:
I will say that the vast, vast majority of Leatherman owners probably never ever come on-line and post about them. Weird I know, but there you have it. ;)Well said, Gareth. :)
-
Had bought an Expanse 33Lx and gave it away to a family member. First thing that needed to be fixed right out of the box was take out that sharp first tooth on the blade (closest to the pivot) as it punctured my finger.
Noticed the mechanism attracted lint & pocket change. It held an edge very well.
It retired to use as a portable steak knife in the end.When Leatherman designed the H & K knife tools they surely did not take into consideration of using the the tools for any rigorous use - there was no lock-back on the large bit driver. Past that it was a great knife.
With Leatherman's pruners, none of the inside tools locked. Those got axed too.
Leatherman seems to be on a streak of new gimmicks & toys; throw in diversely composed tools, compromise quality for quantity, make them easier to use, change the tried and proven formats, then seen what happens. If it doesn't sell, discontinue them.
Those of us that are making comments do not seem to be making an impact where it counts. Modders are making Leatherman's tools better. About the only thing I can remember where a modder made a difference was that guy that redesigned the Squirt & Style CS into the marketed a Style PS.
PS: Thought I had a Style PS once... family member must have run off with it too. May have to get another one some day.
-
@Xelkos said:
I will say that the vast, vast majority of Leatherman owners probably never ever come on-line and post about them. Weird I know, but there you have it. ;)
Is strange, never knew about MTO until Juli (Lady Leatherman) told me about y'all. :D
We'll be sure to thank her for that the next time we talk
:DNot sure if this is a comment, sarcasm, or both.

PPS: Concerning the Wingman promo comments in the past, I retract them, and offer my apologies.
-
@Xelkos said:
Had bought an Expanse 33Lx and gave it away to a family member. First thing that needed to be fixed right out of the box was take out that sharp first tooth on the blade (closest to the pivot) as it punctured my finger.
Noticed the mechanism attracted lint & pocket change. It held an edge very well.
It retired to use as a portable steak knife in the end.When Leatherman designed the H & K knife tools they surely did not take into consideration of using the the tools for any rigorous use - there was no lock-back on the large bit driver. Past that it was a great knife.
With Leatherman's pruners, none of the inside tools locked. Those got axed too.
FWIW, the Genus had all locking tools. I bought one for my mother a few years ago, and she loves it. And it sounds like you and I agree about the knives... they weren't perfect, and they certainly had a few design flaws, but they were nice knives (especially the models with the 154CM blades), they were affordable, and they got the job done.
@Xelkos said:
Leatherman seems to be on a streak of new gimmicks & toys; throw in diversely composed tools, compromise quality for quantity, make them easier to use, change the tried and proven formats, then seen what happens. If it doesn't sell, discontinue them.I understand what you're saying, and I agree that not everything Leatherman puts out is a 10. at the same time, if they didn't experiment and try new things, they would just keep churning out PSTs and calling it good.
@Xelkos said:
Those of us that are making comments do not seem to be making an impact where it counts. Modders are making Leatherman's tools better. About the only thing I can remember where a modder made a difference was that guy that redesigned the Squirt & Style CS into the marketed a Style PS.PS: Thought I had a Style PS once... family member must have run off with it too. May have to get another one some day.
It's important to keep in mind that "better" is a subjective term. Some of the mods I've seen on here are amazing. Metropolicity's Black Tide mod inspired me to try my hand at modding and create a ReCharge. But Leatherman is a business -- they have to consider how much it will cost to produce a tool, how much they can sell it for, how many they think they'll be able to sell, time to develop the product, etc., etc. And as vocal as we may be here on MT.org, we do not represent a good market sample for Leatherman; we are more of a niche market. There are plenty of LM owners who have been using a Super Tool or PST for 20+ years and see no reason/need to upgrade. On the other hand, I have around 50 Leathermans to my name, but around here, I'm pretty sure we're the exception rather than the norm. :D
Just because Leatherman doesn't implement specific ideas that we have doesn't mean that they don't listen to their customers. that being said, I'll be surprised if we don't see a Wave/Charge model with the replaceable wire cutters in the next couple years. ;)
Re: Style PS -- as a father of two young boys, the Style PS makes a great kid-friendly tool. I got one a few months ago for my oldest son for his 5th birthday, and he LOVES it. :)
-
@Breezy12 said:
I would argue that Leatherman is listening to their customers.- I have heard many people (aka potential customers) say something along the lines of, "I'd love to get a Leatherman, but the Brand X multitools are so much cheaper!" Enter the Wingman and Sidekick. Yes, I agree with you that the build quality is not up to par with the Wave/Charge, but there's a difference between a premium tool and an entry-level tool.
I agree wholeheartedly with this whole post.

I hate to break it to you folks, but we are NOT Leatherman's primary customers, no matter how much we apparently like to think we are.
If you took the total number of subscribers here at MTO and divide it by the number of customers who bought a Leatherman last year, we're a smurfing rounding error. Heck, toss in the membership of the bigger EDC and preparedness forums, we're still just a little blip on Leatherman's radar. Sure, Leatherman could make tools that cater to just this demanding crowd, but they would be bankrupt within a year. We're a boutique market at best.
Which is why I have to laugh when I read stuff like this:
@Xelkos said:
Have heard many Leatherman owners want the CM154/S30v steel blades over the cheap commonly-used 440C soft metals. Know a lot of have asked for better steel on the serrated blades too. Better steel holds an sharper edge longer."Heard" where? Around here, OK sure. In the aisles of Home Depot, REI or WalMart? Not smurfing likely.
I'll betcha dollars to donuts, the 420HC-blade models outsell the "premium" models at about ten-to-one. And I'll also betcha the cheap Sheffield, Husky, and assorted no-name Chinese tools outsell ALL Leatherman tools more than ten-to-one. The vast majority of buyers can't see the difference between a ST300 and the $10 P.O.S. they buy at Wally World, beat the crap out of, and throw away when they break. (Or just when the blade gets dull.)
If Leatherman wants to grow their business, it won't be by catering to this crowd; we're already sold. Hence "entry level" tools like the Wingman and Sidekick, to tempt the customers who could never justify the Leatherman name in the past, to take the plunge. Hopefully, some of them will see the light, and invest in a higher-end Leatherman the next time.
If you want tools built with premium material and finishes, there are always Atwoods, and they're priced accordingly. Personally, I'd rather see a good product at a price that most people who need one can afford to pay.
But that's just my opinion, I could be wrong.
</rant>
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login