What Did You Use Your Multitool For Today?
-
Used a Charge AL and a SwissTool to get the sump pump working again, stupid float guide picked today to break. They are drying now after I washed all the mucky basement scum off of them.
-
I used the scissors on my Gerber MP400 to cut a first aid dressing to the right size after my neighbours Daughter cut her finger.
-
I use a combination of juice xe6 and a surge to put together a bassinet for my nephew.
Sent from my LG-P925 using Tapatalk 2
-
Leatherman Blast and work tools I carry
Pulled staples small nails, cut molding, wired a plug in striped wire, flat head on plug in screw's tighten up a shower head and faucet, opened. + put together a miter box, pulled up some old carpet, pocketwrench 2 opened a few paint cans, did not use the chapman ratchet and bit kit I brought.
Vic Spirit lm micra and tt pocket chopper tonight
I opened a bag of chips with the spirit so far

-
@New_World said:
to take my antec 900 computer case apart.used leatherman wave
Oooh, nice case!!

Today I used my MP800 to tighten up a few bolts on some racking at work.
-
Used my Rebar to install my son's stereo in his truck
-
A few bits of DIY today, nothing too big.
Replaced some of the plumbing under the kitchen sink, and replaced the valves on the taps on the kitchen sink. Spirit can opener popped the caps off so the Spirit Phillips could remove the heads. Pioneer Harvester used to shorten one of the outlet pipes, and the awl used to put a cup hook inside the door for hanging a dustpan and brush. It needed opening up wider as the dustpan wouldn't hook on, but the Spirit pliers sorted that in a jiffy
Still need to track down (or improvise) a fitting for the overflow though

-
The LM tools were on craft duty today with the girls. Center pieces for the wedding. One big field test of scissors. The Rustman,Squirt ps4,and Style Cs,Ps. The big winners were the Styles.The truly girlie verdict on the two others is the squirt is cute,and the rustman is big and dumb.
I myself repaired the parlor black iron lamp with the BO Fuse. Needed new guts.The 3way selector crapped out and I replaced it with a pull chain selector. also gave the rustman some love and used the clamshell tool on the new orange fuse clamshell package.

-
Yesterday I used LM Blast to pull some staples,remove screws-nails from walls I was painting. Chapman ratchet/bit's to take the locks of 10 windows, used pocketwrench 2 to open paint cans.
Today used Blast to strip some wire, my pocketwrench 2 to pry up some skirting on a trailer house. Then I lost it :(
Sucks I used my pocketwrench 2 a lot we finished the job installing that trailer so I won't be going back. I bet it's under the house :(
Did I say it SUCKS yet. SMURFF
I'm bummed it was a very handy tool. :ahhh
-
@50ft-trad said:
A few bits of DIY today, nothing too big.Replaced some of the plumbing under the kitchen sink, and replaced the valves on the taps on the kitchen sink. Spirit can opener popped the caps off so the Spirit Phillips could remove the heads. Pioneer Harvester used to shorten one of the outlet pipes, and the awl used to put a cup hook inside the door for hanging a dustpan and brush. It needed opening up wider as the dustpan wouldn't hook on, but the Spirit pliers sorted that in a jiffy
Still need to track down (or improvise) a fitting for the overflow though

Done :D Tracked one down, and the Spirit finished the job off

Kitchen repaired, time to move upstairs to repair a chest of drawers :-\ -
Used my PST II and Farmer to repair the starter pull on a power washer, and to unclog a tint machine. Gotta love the alox awl for clearing a clogged nozzle.

-
Used my Juice S2 to replace a light switch. I've never before heard of a light switch going bad, but apparently it happens. Huh.
And it looks like the ballast on our kitchen fluorescent light is about shot, so it'll be up on the repair list soon.
I think I'm due to receive my home repair badge any minute now.
-
Used my Victorinox Manager and a bobby pin to pick a lock.
My daughter used her new Gerber Dime to tighten all of the screws in the house. -
@JNieporte said:
Used my Victorinox Manager and a bobby pin to pick a lock.
My daughter used her new Gerber Dime to tighten all of the screws in the house.
Brilliant 
Today my Yeoman and Octane merely served the purpose of making my trousers a little bit heavier

-
Nothing too ambitious for me today... all I've done so far is use my CT Lite to open a medication package for my wife, and to tighten the screws of a few of the handles on the cabinets in the kitchen.
-
Used my S2 to adjust a rear bicycle derailleur and tighten the clamp on the gear shift lever.
-
Used my wave to pull an upholstery staple out of my wife's grandmother's favorite chair (it had been sticking out and stabbing her)... Brownie points!
spelling mistakes and misinformation courtesy of Tapatalk
-
I used the blade on my spirit x today to cut open lots of shrink rap. That's all my knives get used for lately, cutting shrink rap off of beer pallets at work. It sounds awesome cuz beer is involved, but I assure you this is the dullest use of a knife I can think of.
-
Used the BO Fuse pliers to open the oil fill cap on the push mower then used to pull back the throttle a bit.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login