first time poster, first mod -- Charge XTi + Rebar
-
-
Great work!
I actually run into that over extended pin problem a lot, it's sticks up just enough to snag and get in the way of either blade. What you can do is take apart the plier again and you can push the pin and whole assembly over a bit to close
Up the gap between the wish bone.This not only tightens up the grip on te pliers (very minor) but usually frees up the binding blade.
I that doesn't work, you can slowly and carefully grind off the pin's height and check often if it's got enough clearance.
Glad I got some modding spirits rustling!
thanks Metropolicity -- glad to hear it's not just me!
I'll try taking the plier apart again this weekend, and if that doesn't work, I'll probably just grind the pin down, since it's just barely blocking the serrated blade from opening.Can't wait to see your ReCharge...

finally got around to taking the plier apart again to push the pin assembly bit over again... but unfortunately, no luck with solving the issue of the overextending pin.
looks like it's time to start carefully grinding/filing that guy down.interesting side note: the two handles of the XTi that I started with have different date stamps -- one is 12/04, and the other is 08/08, so this one was obviously refurbished at some point. the pin assembly is just slightly different on the two sides, and the only one having problems is the older side (12/04).
thanks again for the advice, Metropolicity!
-
@Breezy12 said:
interesting side note: the two handles of the XTi that I started with have different date stamps -- one is 12/04, and the other is 08/08, so this one was obviously refurbished at some point. the pin assembly is just slightly different on the two sides, and the only one having problems is the older side (12/04)....and a quick check on the Leatherman timeline reveals that these date stamps indicate that the tool I started with was actually half XTi, half TTi, since the TTi production started in 2006.

-
another update: broke in my brother's new Dremel tonight by grinding down the pin mechanism just a hair, and now the serrated blade operates nice and smoothly.

prior to this, I was able to open the serrated blade by opening the handles just a little bit (maybe 1/4 of the way), then opening the blade... but I much prefer the nice smooth opening that it now has.
as far as next steps go, I can't decide if I want to steal the scissors from a Wave to add to the interior of my ReCharge, or if I want to try adding the Wingman scissors on the outside of the tool.
I have to admit -- for years, I never saw the appeal of the XTi/ALX with the dual bit drivers, but they have come in handy lately. my original plan was to replace one of the bit drivers, but now I'm considering keeping them both...
-
If you are gonna play around with the external tools, how about trying the blade exchanger from a surge as well as the scissors from the wingman? You can keep both the saw and file that way, although you may loose about a 1/4" off the length of the saw/file blades to make them fit when closed.
Just a thought, see what you think - it would be a pretty unique tool if it works though


-
@3in1 said:
If you are gonna play around with the external tools, how about trying the blade exchanger from a surge as well as the scissors from the wingman? You can keep both the saw and file that way, although you may loose about a 1/4" off the length of the saw/file blades to make them fit when closed.
Just a thought, see what you think - it would be a pretty unique tool if it works though


this mod is getting expensive enough as it is -- I just got a Wave on ebay to scrap for parts. but the blade exchanger from the Surge is something I hadn't even thought of... so many choices. ???
thanks for adding fuel to the (expensive) fire, 3in1.

-
-
If you are gonna play around with the external tools, how about trying the blade exchanger from a surge as well as the scissors from the wingman? You can keep both the saw and file that way, although you may loose about a 1/4" off the length of the saw/file blades to make them fit when closed.
Just a thought, see what you think - it would be a pretty unique tool if it works though


this mod is getting expensive enough as it is -- I just got a Wave on ebay to scrap for parts. but the blade exchanger from the Surge is something I hadn't even thought of... so many choices. ???
thanks for adding fuel to the (expensive) fire, 3in1.

You actually loose quite a bit more than 1/4", also the locking tab needs to be reground, but I don't know if there is enough clearance for it. I tried for fun oen day and I think it didn't want to rotate due to the oversized blade exchanger and a smaller Wave tool.
-
If you are gonna play around with the external tools, how about trying the blade exchanger from a surge as well as the scissors from the wingman? You can keep both the saw and file that way, although you may loose about a 1/4" off the length of the saw/file blades to make them fit when closed.
Just a thought, see what you think - it would be a pretty unique tool if it works though


this mod is getting expensive enough as it is -- I just got a Wave on ebay to scrap for parts. but the blade exchanger from the Surge is something I hadn't even thought of... so many choices. ???
thanks for adding fuel to the (expensive) fire, 3in1.

You actually loose quite a bit more than 1/4", also the locking tab needs to be reground, but I don't know if there is enough clearance for it. I tried for fun oen day and I think it didn't want to rotate due to the oversized blade exchanger and a smaller Wave tool.
You had the same thought then Metro, just took it a bit further... shame it wont fit though.
At least you cleared it up before anyone killed a perfectly good surge
-
You actually loose quite a bit more than 1/4", also the locking tab needs to be reground, but I don't know if there is enough clearance for it. I tried for fun oen day and I think it didn't want to rotate due to the oversized blade exchanger and a smaller Wave tool.
You had the same thought then Metro, just took it a bit further... shame it wont fit though.
At least you cleared it up before anyone killed a perfectly good surge
agreed... thanks for clearing that up, Metro!

so now I'm back to the question of internal vs. external scissors. luckily, the Wave that I have coming wasn't too expensive on ebay, and a spare Wingman should be fairly cheap as well.
looks like I've come down with a case of mod-itis... thanks Metro!
to be continued... -
ReCharge update: I got my hands on a new Wave that was recently built (date stamp is 0312), and Delta10 actually noticed a difference in the thumb pad on the scissors. In this image, his "Rave" is on the top (date stamp: 0809), and my Wave is on the bottom:

With the reduced size of the thumb pad, I was really hoping they would fit into my ReCharge without needing any grinding (and still allow the tool to fully close). It looks like it should fit, right??

I looked at it closely, took some measurements... and decided the only way to know for sure was to try it out, so I replaced one of the large bit drivers with the scissors + large flat driver from the Wave...
Unfortunately, the result was pretty much the same. :-[ the tools closes a little bit further than Delta's Rave, but still doesn't close completely. oh well, it was worth a shot... hopefully the smaller thumb pad will at least make the dremel work a little easier.
I'm also planning on replacing the large flat driver with an awl, so the large flat driver is basically a placeholder at this point.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login