Molle sheaths...
-
Looking to try out one of these sheaths. Specifically the "Large" one(this being the smaller of the two molle sheaths... Yeah, i dont quite get it either)
http://www.leatherman.com/accessories/product/Large_MOLLE_Sheath
Anyway, the list of compatible leathermans is pretty long, which makes me assume it isnt a very tight fit on the smallest one(skeletool) and probably a very tight fit for the largest one(Supertool 300)
I was looking to use it with either a blast or supertool 300, so it someone who owns this combination could tell me how the fit is, id appreciate it. Pictures would be even better.
-
I have the coyote brown MOLLE sheath that comes wit the MUT, which is the same size as the one you linked to. I use it for my Surge, which is very close to the SuperTool 300 in size. It holds the Surge, the bit kit, spare saw, AAA light on one side, and spare AAA battery on the other without making it too tight to remove anything. The Blast and Wave will go in the sheath, yes, but they both move around quite a bit.
-
i use the black one for my ST300 and it fits pretty good with some wiggle room. dont know about the blast, the thing about these new molle compatible sheaths is that the velcro frays pretty quick on mine. btw the differnce between the black and brown ones are the extra side pockets, no extra pockets on the black one i got.

-
I Carry A Fuse and a Mut wrench pretty much everyday in the Molle [large] sheath. The tools are sealed in the sheath with a tight fit.No tools flopping around at all. Its the same Molle sheath that i used for the ST30.
The sheath itself loosened up a good bit with some nice wear on it. the velcro is holding up well with no complaints. Some will say the noise is a big factor with the velcro.,but in not trying to be ninja jedi master with it.
I've got some pics with the skele,PST,ST300 and Fuse The fit with the smaller tools is good but you have like an inch or more of the front flap hanging past the bottom of the sheath.



-
Fuse and ST Pics.




-
I'm pretty sure the MUT comes with the XL.
http://www.leatherman.com/accessories/product/XL_MOLLE_Sheath_-_BrownThe picture they have on the Large is the same one on the XL. The Large one actually looks like this.(note how the front flap extends past the drainage rivet. The back is also totally different)

They sold BO Fuse' with the large one, but it also being able to fit a 300 is screwing with my mind, since i have a nylon wave sheath(too small for the 300) that i tried on the blast and it shook around in it. So having a sheath that can fit a 300 or a blast just does not make sense unless its loaded with elastic nylon.
-
It fits them both just fine. My BO Kick came with a black molle sheath.Its versitle. Just have to pull down a little tighter on the front flap to achieve a snug fit. I bought the molle sheath because the leather/nylon sheath that came with the ST300 loosened up to much causing the ST shake arount in it. I found the blast and have some more bad pictures.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login