Gerber Dime is here
-
There have been many good comparisons between the Dime and PS4; this isn't intended to be one. This is more of a focus on the Dime.

Green Dime's plier tips. No problem...

Red Dime's plier tips, after filing down the faulty tip. This shouldn't have been necessary...

Green Dime's jaws. Sloppy, but they do grip...

Red Dime's jaws. Sloppy, but again, they work...

I know I said earlier that the teeth are ground nicely, but I was looking at the black handle side. Apparently, the colored sides are mis-ground on both of mine.
The scissors, both sides. Those black specks (you can see them on the green Dime) are on both scissors, red and green, but I don't know what they are...

The drivers, showing both sides...

When the Dime is closed (when you can apply the most torque), driving capabilities with the small driver are severely limited because the bottle opener is in the way...

The blade, again, shown from both sides. I find that when using the blade, the bottle opener likes to dig into my ring finger...

The chisel-ground package opener. Again, the bottle opener likes to dig into my finger when using this...

Showing the well-known rubbing handles...

After only three opening-and-closing cycles, it looks like this...

-
Thanks for the awesome pictures! I was considering the Dime once, then I went for the Squirt PS4 ... it seems I did the right thing.
-
That depends on who you talk to. My PS4 is blah at best and I really like the Dime. Where JNieporte says he finds the bottle opener digs into his fingers I say I like the extension of the handle. Where he says the file is blocked by the bottle opener I say it's ok because the file on the Dime sucks just as bad as the one on the PS4 anyway.
It's all a matter of personal taste- I like the Dime better, some other folks like the Squirt and others don't like either. :D
Def
-
@N_N_R said:
Thanks for the awesome pictures! I was considering the Dime once, then I went for the Squirt PS4 ... it seems I did the right thing.I agree with Grant. My P4s are not great, and my Style PS just broke on the scissors same as yours :( My Dimes are better than my Squirts - better in quality, and better for me too. It seems there is no right answer other than what is best for you ... and how lucky you are to get a good one or bad one
-
It also seems first impressions are based on if your tool has any imperfections too. I didn't like the PS4 at all, but still love the older P4 so much I bought 4 as 'backup'. I haven't tried a Dime, but don't 'need' one so I haven't bothered.
-
@Grant Lamontagne said:
...Where he says the file is blocked by the bottle opener I say it's ok because the file on the Dime sucks just as bad as the one on the PS4 anyway.It's all a matter of personal taste- I like the Dime better, some other folks like the Squirt and others don't like either. :D
Def
I don't like either, to be perfectly honest. I prefer the Squirt more, but I'll stick with my Juice CS4 over either of them. Slips right into the pocket.
And yes, both files suck.
-
This would be a pretty boring site if there was only one perfect tool that worked for everyone!
Def
-
@Grant Lamontagne said:
This would be a pretty boring site if there was only one perfect tool that worked for everyone!
Def
Hammer + duct tape + WD40 = the perfect tool!
Needs scissors ...

-
@50ft-trad said:
@Grant Lamontagne said:
This would be a pretty boring site if there was only one perfect tool that worked for everyone!
Def
Hammer + duct tape + WD40 = the perfect tool!
Needs scissors ...

You've got teeth, right? A 16d nail with a sharp point? A neodymium yttrium-aluminum-garnet laser cutter that you can stow in your pants pocket?
Scissors

-
@50ft-trad said:
@Grant Lamontagne said:
This would be a pretty boring site if there was only one perfect tool that worked for everyone!
Def
Hammer + duct tape + WD40 = the perfect tool!
Needs scissors ...

You've got teeth, right? A 16d nail with a sharp point? A neodymium yttrium-aluminum-garnet laser cutter that you can stow in your pants pocket?
Scissors

:D
-
A Nd-YAG-Laser that fits in my pocket?
Check.

I still need a holster for the heavy duty version and I must say that the anodization could be better…

(I'm working on bringing both lasers back online)
I don't trust the pliers on the dime. They might be longer and open wider but for me strength and durability are more important. I think the rivet on the dime will become loose much faster as it will experience greater force.
-
@adfel said:
I don't trust the pliers on the dime. They might be longer and open wider but for me strength and durability are more important. I think the rivet on the dime will become loose much faster as it will experience greater force.I agree but I don't think it's the rivet you have to worry about.
-
Just thought I'd jump in here instead of making a new thread.
What would you choose between a Squirt, Clutch, the Compact Multi-Tool (Bear Grylls branded Clutch, slightly different tools) or the Dime?
Cheers
-
@marty1990 said:
Just thought I'd jump in here instead of making a new thread.What would you choose between a Squirt, Clutch, the Compact Multi-Tool (Bear Grylls branded Clutch, slightly different tools) or the Dime?
Cheers
Ive used a Squirt S4, P4, PS4, gerber Clutch. Of those I liked the Squirt P4 best. I felt it was the best overall quality made tool and I still carry it on my keychain every day.
-
@marty1990 said:
Just thought I'd jump in here instead of making a new thread.What would you choose between a Squirt, Clutch, the Compact Multi-Tool (Bear Grylls branded Clutch, slightly different tools) or the Dime?
Cheers
Dime, without any doubt or hesitation.
-
Micra for me, but since it's not on the list I'd take the Dime.
If I wanted sturdy small pliers it's impossible to beat the SOG CrossGrip, although the internal tools in the SOG are lacking. Typical SOG- great concept but once the initial idea was achieved the rest was just phoned in.
Def
Sent from my MB860 using Tapatalk 2
-
Okay, so my Dime literally just arrived. I like the pliers. The knife needs touching up, but out the box it's decent. The tweezers am not a fan of at all. I took them out and they didn't work as intended until I bent them to match my SAK ones. Before I did that, they were just flat. Now, am presuming this just happened because it seems to be a tight squeeze for it to get in the holder/compartment thing. I also noticed, right out the box, the paint chips that appear from opening and closing the pliers were there out the box. Otherwise, decent little multi-tool, seems well built.
-
Got me a Dime this week, to replace a Leatherman P4. On first impressions I'm very happy with it.
Pros:
-
Much stiffer slip lock than my P4, and I can tighten things up with the torx screws (my P4 is riveted)
-
Great tool loadout - tools are of a practical size, and suit my needs, all* seem *quite well made (no trial by fire yet)
-
Outside bottle opener blows away the P4's!
-
The 'sheep's foot' knife design suits my needs very well, since I often use the tip for scoring, which is more difficult on a blade with a higher point. Basically, it's closer to a utility blade than most, which I like.
-
Blade and package opener came very sharp
-
Looks great!
Cons - only problems with build quality so far, and they're mostly cosmetic
-
The package opener on mine does not quite sit flush in the body
-
As others have mentioned, the scales scrape. Being on my keys though, I expect the finish to degrade pretty fast anyhow
-
There is a bit of wobble between the two halves when it's closed. Tightening the torx screws cut down on this, but it's still there
-
The lanyard / key ring loop is on the same end as the bottle opener, making it harder to use if you've got a bunch of keys on it! That said, putting at the other end and obstructing the pliers would have been much worse
I also got a Clutch, since it was so damn cheap, and I have to say, the quality of the Dime is much, much better. The screwdriver tips on the Clutch came rounded, I doubt they're good for much at all. The pliers halves don't sit quite level, and are also rounded at the edges of the teeth.
I'm going to try taking the serrated blade off the Clutch and putting it in place of the scissors on the Dime. The scissors are good quality, very nice, but I don't have much use for them.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




