Questions: Modding a Compact Black
-
I do ship from Germany, so the "Warensendung" would be 65 ct, i believe.
-
PM sent.
-
@crackout said:
Would it be possible to do the following:Scale
Liner
Large Blade - Nail File
Liner
Scissors
Liner
Multipurpose-Caplifter - Inline Phillips
Liner
ScaleUsing the Compact as the base because of the pen and the multiuse caplifter.
You should be able to do that config. Im not sure about the nail file on 91mm though? I tried to put it on the 93mm frame (the nail file from a cadet) and it doesnt work. You should be able to fit the new style philips (shorter) and a caplifter or combo tool in one layer no problem.
-
My idea was to use an Explorer to get the inline phillips, the small blade and the awl (and its backspring).
Remove the combo lifter from the blade layer in the compact, therefore add the small blade.
Then add a new layer with the combo lifter and the inline phillips on the front and the awl on the back.Possible? Geez, I'm the curious type.

-
Yep that should work no problem.

-
Alright, nice.
Ordered an Explorer and a Compact. Let's see what I can come up with.I guess I'll have to shim the multi cap lifter a bit because the phillips is thicker?
Thanks for the input!
-
Still waiting for my Explorer to arrive but I got thinking when I saw the combo tool on my Compact. Due to its use in the blade layer, it's a lot thinner than the actual caplifter.
Anyone ever tried to exchange the standard lifter for the combo tool? I guess I could use the keyring spacer of the explorer to shim it?
-
@crackout said:
Still waiting for my Explorer to arrive but I got thinking when I saw the combo tool on my Compact. Due to its use in the blade layer, it's a lot thinner than the actual caplifter.Anyone ever tried to exchange the standard lifter for the combo tool? I guess I could use the keyring spacer of the explorer to shim it?
Yep you'll need to make some custom washers to shim it. I buy thin sheet in a few very thin thicknesses, then make the washers from those depending on how thin they need to be.
-
I tore the old Camping apart - shall i include the opener layer with the scissors?!
-
@crackout said:
Still waiting for my Explorer to arrive but I got thinking when I saw the combo tool on my Compact. Due to its use in the blade layer, it's a lot thinner than the actual caplifter.Anyone ever tried to exchange the standard lifter for the combo tool? I guess I could use the keyring spacer of the explorer to shim it?
You try and see if Rotokid has any of the combo tools from the 111 mm models. As far as I know they're identical in size to the ones on the 91 mm models, but they're the full thickness of the layer. They're hard to come by though, IIRC they only come in the Work Champ XL, Hunter, and Equestrian.
-
So I got the Explorer today and eventually took it apart. Before even laying hand on the Compact (it grew on me :D) I tried to combine the normal caplifter and the phillips.
The thing is that I'm not really sure what backspring to use. The phillips is thicker than the caplifter so I'm better of using its spring and shim the caplifter like Syph did here:
However, the caplifter doesn't seem to work with the phillips spring. Any ideas?
-
Hmmm when I did the mod on the 93mm I used a blade spring instead of the regular opener spring and I had to do some shaping of it to get it perfect. How does the philips spring part compare to the standard opener layer spring part? If you can grind the philips one to match, and smooth it out it should work. Alternatively you can alter the shape of the caplifter. I havent tried this on a 91mm so know the difference from the 93 I did though.
-
I'm pretty busy at the moment, so here's just a rough overview shot right after the disassembly.

The upmost spring is from the blades, while the one with the keychain ring is the one of the caplifter.
-
Alright, first day modding.
I grinded the phillips to the same thickness as the caplifter and reshaped it around the pivot hole. Good snap and I was able to also maintain the mid position friction "lock". I think it could be a little bit more "flush" with the scales but it's okay. It's perfectly accessible this way. :)
Now for some pictures. I added the scissors layer to give it a bit more stability since I'm getting my 2.2mm brass rods not until Thursday and I used a sanded down 2.5 one, haha.



I'm at the University right now, that's why there are only mobile phone pics. :p
-
The scissor without the backlayer tool should arrive today or tomorrow. I hope it is of help for your project.
-
Looking awesome so far! Couldn't you just have shaped the caplifter to fit into the phillips backspring and shim it though instead of grinding it?
-
Unfortunately not because the caplifter has too little material around the pivot to work with the spring.
Also the phillips spring doesn't feature a backside tool.I tweaked the phillips a little more, now it's properly flush with the liner.
I'll post pictures tomorrow showing it and I'll include a comparison shot of the magnifying glass and the caplifter. -
@crackout said:
Unfortunately not because the caplifter has too little material around the pivot to work with the spring.
Also the phillips spring doesn't feature a backside tool.I tweaked the phillips a little more, now it's properly flush with the liner.
I'll post pictures tomorrow showing it and I'll include a comparison shot of the magnifying glass and the caplifter.Crud, I was hoping to do something like that :D Thanks, that'll help a lot!
-
So here we go. First up a quick preview stacking of the final outcome (will have to dismantle the Compact first tomorrow).

You can see the phillips now sits perfectly. I added an additional liner between the scissors and the phillips to make enough room for the head of the driver to pass by scissors.
Front:
Large Blade - Small Blade
Scissors
Caplifter - PhillipsBack:
Corkscrew plus Mini Flathead
Multifunction Hook plus Nailfile
AwlFinished by Black Plus Scales (instead of the Explorer's scales in the picture).
I get the thin rods tomorrow night so I hope for a Friday finish. :D
And here's the comparison shot of the magnifying glass and the caplifter.

The lack of material immediately buries the tool. :/
lowtech: Your stuff arrived nicely. Thanks a lot. Will paypal to you now. I'm still not sure if I use the spring though, because you effectively lose a tool (in the case of the compact the nice nailfile). We'll see.
-
Wow, I didn't expect the mag glass to be that much bigger. Maybe a spring with the old mag glass would work?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login