Leatherman Custom Wave
-
Dave must not know about MTO... why did they put the lanyard loop on the wrong side of the awl? And why didn't they start off with a Charge base if he wanted a lanyard loop??
Touring the Leatherman Plant and Building a Custom Tool
Now I should refer everyone over to Charger's post on his alwsome Wave modification. Works great on a Charge TTi as well. :D
Soon as I get my paws on a Rebar...

-
oh yah, I forgot that the awl's cutting edge needed to be ground down a bit because it would bottom out on the outside opening blade spring lock tabs. About .5mm needed to be taken off the tip (and subsequent edge to make it sit flush when closed).
Ben skipped out on grinding that portion and ended up thinning out the awl's top portion.
Whichever the case...to each their own for tools and effectiveness.
Awl installation documented here: /post/608351
-
Used an ST300 awl which required very little grinding.
However I messed up trying to polish the awl, and I've used mine quite a lot and it shows signs of use. It could stand a replacement.Leatherman has a no questions asked warranty, correct? :D Would like to get the awl back onto ST300, it seems nekked without it.
Will wait to acquire a Rebar to do any more retrofitting. That may be a while, still unemployed.
-
Well, I picked up a Rebar and a nice $20 used Wave to do this mod, but I've decided not to. Why? I like the Rebar too much and can't get on with the OHO blades on the Wave.

-
Got to love how they make a custom tool, with next to no custom parts.
I love LM but they need some serious competition to nudge some innovation.
Unless of course they did this whole thing to test the waters on how eager the masses are for the option of custom tools. Gotta wonder why they chose wave over charge. Now granted I haven't watched the vid if they say so in that.
I just hope that machining gets so cheap, that having custom parts made for doing our own mods becomes affordable.
I love grinding stuff but my hands and wrist aren't what they used to be, so If I could buy or have made what I want , it would be awesome.
-
I removed the small bit driver from my charge tti and put in a spare flat screw driver I had ground down into a awl. Worked great. I had to trim the handle of the scissors just a tiny bit and move the other flat blade over and shorten it just a bit.


-
Castum Wave

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login