Esbit 585 cookset?
-
I've not seen that set before, but I have used the old standard army esbit/hexi stoves with the standard crusader cup, and to be honest I wasn't impressed. Esbit solid fuel is a good back up IMO, but not a primary. Used in conjuction with a little alcohol stove maybe with esbit tabs for back up, it could be a winner - but I wouldn't want to just take that anywhere
Personal opinion is the money would do more good put away in a drawer to save up for a Jetboil which is the dogs danglies for short trips
Just personal opinion

-
I wonder if a little homemade meths burner will fit in there?

:D
-
If that square burner pot thingy is fixed it could be tricky. Then again there's that tea light candle holder gizmo on a rubber hose thing with seperate reservoir that that bloke makes ... I'm not helping much am I

Tinny? Something like that?
consults you tube
Ahh, here we go ....
-
That is tiiiiiiiny :D
Thanks Al......I was actually thinking of the ones I made from old aerosol cans :)
-
I'm sure they'd work a treat, but not sure how stable they'd be on that tray you put the esbit tabs on?
-
@Mike, Lord of the Spammers! said:
It certainly looks light. Is it titanium? :)says that it is anodised aluminium, about the same weight but better heat conductor. ;)
@sparky415 said:
I wonder if a little homemade meths burner will fit in there?
:D
looks like someone has done it. I'm wondering if he removed the little burner tray? Looks like it is simply screwed in place to me.
-

Looks like it needs a little

:D
-
I had another look at this last night, and it seems a few people have run this with alcohol stoves on You Tube. It does appear the burner pans unscrews. There seems to be a few reasonable deals out there on it at the moment too :)
-
I may have tried one...or two :D
The tray on mine is riveted on. I cut the bottom of a can (tuna I think..just the right diameter) to make a platform for the mini alky burners I built. I suppose the fuel tray could be removed completely and the tablets placed directly on the bottom of the unit. I've not tried twig burning in it, so I don't know about the feet.
The pot is smaller than what I'd want for a primary cooker...about the same size as a GSI nesting cup for a Nalgene bottle. It's nice as a Brewkit setup though.
I found it performed better with the alky burners if I put a fan grill on top of the stove unit. The extra gap allowed the flames to draw around the pot and not blow out the sides.



-
Nice one Dave.
Looking at your pictures it looks like the feet are plastic, right? If so then I would be dubious about building a fire on top of them. Of course they could always be replaced/removed I guess. :) -
Yes, they are plastic. I suppose you could remove them and use it like that...or replace them with metal standoffs.
I used aluminum binding posts (Chicago screws) to add feet to a Trangia 28 windscreen.
-
I love the fan grill trivet
Cunning plan 
What's the purpose of that little chap in the middle of the third pic? Simmering ring?
-
That would be the tablet platform for the 985ml cookset. The burner for that one is basically a copy of a Trangia with some minor differences.
-
Ah, OK. Makes sense now :D
Cheers

-
Well I just got this cookset yesterday (an early Christmas gift from my folks) and I like it.
I did try boiling a cup of water last night to test things out and it was 'OK' but not great. Not very quick and a single tablet didn't quite manage to bring 350ml of water up to the boil before the tablet ran out.I still think I'm going to look at replacing the feet and using some wood as additional fuel to pick things up a bit.

-
I don't have experience with many stoves, so my input is limited but I like my esbit. I use it to Cook eggs, and MREs
-
Gareth, I’m usually able to get to a boil or at least a “rope of pearls” using one tablet and 400ml of water. Explanation of Chinese Boiling terms here – Boiling
I just ran a test using one Esbit tablet with 350ml and got a rolling boil at 9:14, sustained to 12:29 minutes.
I’ve tried a number of different alcohol burners with the 585. I feel that un-jetted, un-pressurized burners are best suited for it. I’ve tried miniature Penny and Pepsi stoves and experienced overheating and runaway because they got overheated in the small space. The majority of the time the fuel would vaporize too quickly and run out before even “shrimp eyes” was achieved. I’ve also had poor luck with alcohol burners if the pot is sitting on the stand as designed…so I raise it up using a 90mm computer fan grill. You’ll get tall flames the height of the pot. I make sure to align the handles with the large port to avoid melting the insulation…because of the incoming air, the tall flames don’t seem to emerge in that section.
I’ve tried various open cup configurations ranging from an empty tea candle cup to tins filled with various types of insulation. The burner shown in the photo is a 1oz slip top tin filled with a couple of layers of carbon felt. Having the insulation is advantageous because the fuel is held by the felt and spills are avoided. The lid protects the felt for transport and can be used for snuffing.
Using the grill and burner I ran 400ml twice on 1 oz of denatured alcohol.
Rolling boil @ 6:47, runout @ 8:37 minutes
Rolling boil @ 7:05, runout @ 8:18 minutes
-
shrimp eyes
about 70-80 °C (155–175 °F) – separate bubbles, rising to topcrab eyes
about 80 °C (175 °F) – streams of bubblesfish eyes
about 80-90 °C (175–195 °F) – larger bubblesrope of pearls
about 90-95 °C (195–205 °F) – steady streams of large bubblesraging torrent
rolling boil, swirling and roilingI like those. :D I think I got it to fish eyes before I ran out of fuel. Now I admit I wasn't timing it but I doubt very much that I got anywhere near 12 minutes out of it.
Also the air temp (about 4deg C) and breeze could easily have affected the results.I'll definitely give it another go though, I've got quite a few tablets to get through. ;) I've also got a couple of meths burners to try as well. I wonder if a standard Trangia burner will sit nicely in it? Need to give that a go as well. :)
-
OK so I've just had another go with the tablets and the results were a little better. Still fell short of actually managing a full rolling boil but was certainly hot enough for a nice cup of coffee. Again I was using 350ml of water, a single tablet and the temperature was 10deg C with a light breeze. I suspect it's the breeze that's scuppering my attempts to reach 100deg C.
I did at least get roughly 12 minutes of burn time from the tablet. -
Esbit is possibly more sensitive to wind than alcohol. Using a secondary windscreen made from heavy foil is worthwhile. I get disposable foil chafing dish covers from the party supply store.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login